Keep your Kamoer FX-STP Dosing Pump system running like new with the PharMed Replacement Tube Assembly. The PharMed tubing will last about 2000 hours of use and should be replaced after that for reliable long-term use. We also suggest replacing the 6 Roller Pump Head when replacing the tubing.
What's Included?1x PharMed Replacement Tube Assembly
Help extend the life of your dosing pumps head by adding a few small drops of lubricant every few weeks. Most dosing pumps either have a loose cap over the roller head holding in grease or they have a self lubricating tube, and over time both the grease or the tube will wear out. By adding Dosing Tube Lubricant to your dosing pumps rollers and tubing you can greatly increase the lifespan of the tubing and entire pump.
Replacement Kamoer Dosing Pump System input and output connectors are made to perfectly fit the Kamoer Dosing Pump Tubing. Replacement Tube Connectors let you replace your current ones, or if you need to splice your dosing tubes together you can do that too. What's Included? 1x Kamoer Dosing Tube Connector
Features:
Compact, beautiful appearance.
Simultaneous monitoring of pH, ORP and temperature values with high accuracy
Connected to the Aquarium Cloud through Kamoer KICCI Intelligent Controller
Remote monitoring using Aquarium Cloud App with support for iOS and Android
DC 5V low voltage power supply
Kamoer S3 Basic Sensor Module integrates temperature, humidity and liquid level detection. It can detect five liquid level signals, two temperature readings and one temperature and humidity reading with high precision at the same time. By connecting a Kamoer KICCI Intelligent Controller and using the Kamoer Aquarium Cloud app, the S3 sensor module allows you to monitor liquid level, temperature and humidity parameters at any time on your smart phone. When the level, temperature or humidity is abnormal, it can send an alarm to your smart phone in real time.
Features:
Compact, beautiful appearance
Rich interface which can simultaneously monitor with high precision five liquid levels, two temperature readings and one temperature and humidity reading.
Remote monitoring when connected to Kamoer KICCI Intelligent Controller
Operate using Kamoer Aquarium Cloud with support for iOS and Android.
DC 12V low voltage power supply
Wiring ConnectionsThe Kamoer KICCI Intelligent Controller and the S3 basic sensor are connecting together using network cables. The network cables are respectively inserted in the CAN interface of the device and the controller. Once you connect the network cables, switch on each device separately and link the device to the controller by using the App.
The Kamoer KICCI is a professional aquarium controller that provides a flexible and easy to expand intelligent control program, so that you may have more time to focus on your favourite fish, coral, plants, landscape, enjoy the fun of feeding and spend less time to do maintenance for temperature, water, light, add elements or food and other miscellaneous work.With the help of Kamoer's aquarium cloud App, the Kamoer KICCI Intelligent Controller allows you to control in real time your aquarium tank, to monitor the temperature, pH value and other performance parametres via iPhone, iPad, Android phones at any time, anywhere, and remotely control the lighting, water pump control, adding of aquarium additives, feeding, etc. You can also set the automatic control program, so that the aquarium controller co-ordinates multiple devices to complete closed-loop control.Compared to other aquarium controller in the industry, the Kamoer KICCI Intelligent Controller is a cost effective product that you can buy at a very affordable price to enjoy a set of aquarium professional services.
The Kamoer X2S is a dual channel WIFI water change pump controlled by mobile app. Users can use the X2S to automatically change and replenish the water for their seawater or fresh water tank. The X2S is equipped with an anti-overflow sensor that triggers an overflow alarm when the water level reaches the anti-overflow sensor and the pump stops working. The X2S is equipped with two stepper peristaltic pump for continuous long-term use.
Highlights
Transfer pumps with stepper motors for longer life and more accurate operation
Anti-overflow sensor will trigger an alarm and stop the pump if the water reaches the sensor
Less water-changing connection lines, simple use
Support sedation of additional evaporative water
Pharmed BPT imported pump tube with standard, long life, heat, acid and alkali resistance, ozone and UV rays, anti-aging and oxidation
Up to 12 water change plans can be set up in a day to support 1-99 days of cycle water change
Support for flow calibration
Includes real-time clock, runs automatically according to setting parameters, and does not lose power-down parameters
Support for iOS and Android devices to control titration pumps via WIFI, and app upgrade titration pump firmware
Pump maximum distance 1.5m.
Dimensions: 220 x 160 x 95mm
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Kamoer remote App controlled Wi-Fi dosing pump the Kamoer‘X4 PRO’ the most compact 4 channel dosing pump with screen available in the marketplace.The pump will provide simple, flexible and precise control of supplement additions to your aquarium through the easy to use Kamoer remote mobile App (Android and IOS).X4 PRO uses direct drive geared DC motors for the ultimate in dosing accuracy and precision at an affordable price.These pumps are incredibly small, under 250mm wide and only 50mm deep.
Specifications:
4 x dosing heads
Fluid Volume: 0.1ml - 9,999ml
Accuracy: P4 Pro <+/-0.5%
Features:
WIFI Control of dosing pump via iPhone/Android device
Small size
Software updatable via WIFI
Battery Back-up – settings saved if power lost
High quality PharMed® tubing used in pump heads
Flow Rate Calibration for each pump
Dosing Functions:
1 - 24 dosing times per day
User defined start/stop
Dosing Period per day (does not have to be 24 hours, for example, user can set to auto dose from midnight to 6am only)
Daily/every “x” days specified days of week Dosing Frequency
Auto/Custom/Manual dosing options
Anti - Interference Delay between pump dosing
Monitors the amount of liquid remaining in each dosing container
X2SR is a Wi-Fi controllable water change system. The user can remotely control it through the mobile phone App. The user can use the X2SR to automatically change the water in their own sea or fresh water tanks at a fixed time and quantitatively.The automatic water replenishment function can be completed through the submersible pump interface. In response to possible overflow risks, X2SR is equipped with an anti-overflow sensor as standard. When the water level reaches the anti-overflow sensor, an alarm will be triggered and the water supply and change will stop.
Basic Parameters
Flow: More than 900ml/min
Power Adapter Input: 100VAC -240VAC Output: DC24V 1.9A
Number of dosing: 24 times/day-1 time/99 days
Interface WiFi (App remote control)
Working environment: Temperatures: 0 - 70℃; Humidity: 10% - 90% (non-condensation)
Dimensions (LxWxH): 168x177x223mm (including pump head)
Weight: 4.106KG (not including power supply)
Packing List01 Host X2SR ×1 02 Power adapter body ×1(DC24V 1.9A) 03 Power adapter plug ×1(US/UK/EU/AU) ×1 04 Plastic cylinder (50ml) ×1 05 PVC tube 9.5*12.5mm; green 6m 06 Kamoer tube manifold Transparent ×3 07 Float level sensor(headphone plug) ×4 08 Float level sensor bracket ×4 09 Magnet (balck) ×8 10 Submersible pump(DC 24V) ×1 11 Male to male line ×1 12 PVC connecting pipe for auto top-off 8*11mm transparent 1.5m 13 Anti-siphon connector(1/4 straight) ×1 14 Grease ×10g ×1 15 Quick start guide ×1 16 Qualified certification ×1Various ApplicationsMore Details
Outlet of drain pump, connect to waste water bucket
Inlet of drain pump, connect to the fish tank
Outlet of refill pump, connect to the fish tank
Inlet of refill pump, connect to fresh sea water
DC24V pump, connect to submersible pump
Liquid level sensor for detecting whether fresh water is empty
Liquid level sensor for detecting whether waste water is full
Anti-overflow sensor for detecting whether the tank reaches the warning water level
Liquid level sensor used to maintain the normal water level of the fish tank
Reset button for configuring the network
DC24V IN, power input
Drain pump running indicator
Power/Wi-Fi status indicator
Refill pump running indicator
Button of Drain pump, long press the button to run
Button of Refill pump, long press the button to run
Installation Method01 App download Note: This App supports Apple devices with iOS9.1 and above, and Android devices with Android4.4 and above.02 Register account Open the App, select the mobile registration or email registration method, and follow the App prompts to complete the account registration.03 View tutorial On the device list page, click the icon "?" in the upper right corner to enter the "Tutorial" page. On the tutorial page, select "X2SR" to view the tutorial. The tutorial includes the user manual and Frequently Asked Questions.Indicator Light Description▲ Note: The X2SR uses red and yellow two-color indicator lights. When the yellow light is on or flashing, the red light is off.
Kamoer Qijian 2 is an intelligent monitoring and control system for aquarium organisms. It provides a flexible and easy-to-expandable intelligent control solution, allowing you to more conveniently carry out aquarium-related maintenance work and have more time to enjoy life. Beautiful.
The system contains 1 pH, 1 EC, and 1 temperature detection to monitor water quality. You can view the sensor value or historical value and historical value change curve through the Aqua Cloud App; if the value is abnormal, the smart controller will report The App on the smartphone pushes sensor abnormal alarms to alert users.
1. Electrical conductivity (EC) electrode interface2. pH electrode interface3. Temperature electrode interface4.DC5V 4A power supply5. LAN interface (10/100M Ethernet interface, wired)6. USB interface (note: the USB interface in the lower left corner is temporarily unavailable)7. It can be used as a CAN interface (CAN device access port, for example, connect to Kamoer smart socket P8 through a cable), or RS485 interface (RS485 device access port, for example, connect to an X4 dosing pump through a cable)8. pH electrode9. Conductivity (EC) electrode10. Temperature electrode
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
KWC is an intelligent water replenishment and water change equipment, suitable for occasions such as water replenishment and water change in sea aquariums.The device can be controlled locally through the App. The device has an optical level sensor(Anti-overflow sensor). It is used to control the start and stop of equipment water replenishment and the overflow prevention of water change; It has a float level sensor(Waste liquid anti-overflow sensor).It is used to prevent the overflow of the waste liquid bucket ； It has three anti-dry-burning submersible pumps, namely, discharge waste water pump （ Q270-S ） , supplementary sea water pump（Q270-S, and supplementary fresh water pump（Q270-F）. When the replenishing water overflows, the replenishing bucket lacks water and the replenishing water is overtime, the KWC will have an indicator light and a buzzer to alarm.
P1:Discharge Sea water pump and Low liquid level detection(Q270-S)P2:Add Sea water pump and Low liquid level detection(Q270-S)P3:Add Fresh water pump and Low liquid level detection(Q270-F)S1:Refill and Anti-overflow sensorS2:Waste water Anti-overflow sensorT1:Tube HolderB1:Siphon BreakStep 1: The optical sensor (S1) is installed on the normal water level of the aquarium and use it as a water replenishment and anti-overflow sensor.Note that the optical level sensor should be far away from the place with bubbles, otherwise it will be interfered and misjudged;Step 2: The float sensor (S2) is installed on the top of the waste water bucket as an anti-overflow sensor. If the water level reaches this position, it means the waste water bucket is full, and the device will alarm to remind the waste water bucket to be full to prevent the waste water bucket from overflowing;Step 3: Connect the pipeline (refill pump-- siphon break -- tube holder). Discharge Sea water pump and Low liquid level detection（P1）is placed in the aquarium and connected to the waste water bucket through a pipeline; Add Sea water pump and Low liquid level detection (P2) is placed in a bucket of fresh sea water and connected to the aquarium through a pipeline; Add Fresh water pump and Low liquid level detection(P3) is placed in a fresh water bucket and connected to the aquarium through a pipeline.Step 4: According to the wiring harness label, connect the submersible pump to the corresponding interface The anti-dry burn identification sensor of the refill pump should be kept upward, so that when the water of the freshwater reservoir is insufficient, it can be timely found and alarm.Step 5: Plug the power adapter into the DC12V connector and power the power adapter. Note: The model of make-up fresh water pump is Q270-F, and the model of waste water pump and make-up sea water pump is Q270-S. it cannot be installed reversely during use.
Kamoer X1 PRO T 2 is remotely controlled via a mobile phone app. Using a long-life stepper motor which can be used as a dosing pump or a calcium reaction pump.When used as a dosing pump, it can flexibly and accurately replenish various elements required for the growth of marine organisms, such as calcium, magnesium, KH enhancer, trace elements, etc to the marine biological tank. Through automatic addition, the work load of manual addition can be greatly reduced, and errors such as missed addition, excessive addition or insufficient addition caused by manual addition can also be avoided.When used as a calcium reaction pump, it can provide a stable flow of water to the calcium reactor.
Features:
Compact footprint with single pump head.
precision stepper motor with direct-drive, geard pump head for greater accuracy.
Pharmed BPT long life pump tubing, threaded connections on pump head for greater secruity.
Adjustable flow rate and calibration function.
Synchronize network time and battery backup features retains correct time.
Remote control via Kamoer Remote App which supports IOS and android.
Auto, manual or continuous modes.
Up to 24 dosing points per day, custom dosing period, dosing frequency with daily/every 'X' days/specific days.
Calculate and display the amount of liquid left in container.
X1 PRO 2 is a single-channel intelligent dosing pump with WIFI remote function, mainly used to add the various elements needed for marine life growth, such as calcium, magnesium, KH booster, trace elements, etc. to marine life cylinder timing, quantitative and accurate. The automation of X1 PRO 2 can greatly reduce the amount of manual added work, but also avoid manual addition caused by leakage, adding excessive or insufficient errors.Basic Parameters▲ Power Adapter: Input: 100VAC -240VAC; Output: DC12V 1A ▲ Dosing parameters: Dosing channel: 1 KXF-B06 pump head ▲ Flow: >33ml/min ▲ Number of dosing：24 times/day - 1 time/99 days ▲ Dosing accuracy：<±2% ▲ Volume range：0.1ml-9999ml ▲ Interface: Wi-Fi ▲ Working environment: Temperatures: 0 - 70℃ Humidity: 10% - 90% (non-condensation) ▲ Storage environment: Temperature: -20C - 85℃ Humidity: 10% - 90% (non-condensation) ▲ Dimensions (L*W*H): 60 x 95 x 83 mm (including pump head) ▲ Weight: 214g (does not include power adapter)Packing List01 X1 PRO2 WiFI Host ×1 02 Power adapter body ×1(DC12V 1A) 03 Power adapter plug ×1(US/UK/EU/AU) 04 Plastic cylinder ×1(10ml) 05 PVC connection tube(3*5 mm;Transparent 2m) 06 Power extension cable(L-type;75mm) 07 Quick start guide English ×1 08 Hanging screw ×2 (ST2.9*13)
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
A1 is a single channel Wi-Fi dosing pump. The structure is equipped with a long-life imported pump tube, and the service life is guaranteed. A1 can flexibly and accurately supplement various trace elements required for the growth of marine organisms to the marine biological tank through the remote control of mobile app.Through automatic addition, the workload of manual addition can be greatly reduced, and errors such as missing addition, excessive or insufficient addition caused by manual addition can also be avoided.In addition, A1 changed the product concept of pump liquid separation before, refined the pump, and added a solution bottle, which solved the space problem of connecting the pump and dosing barrel with a long pump tube in the past. It makes the product more convenient to use and makes the environment around the sea tank more beautiful.
The Kamoer KH Carer is an automatic testing device measuring KH values (Alkalinity) in an aquarium. It includes manual and automatic detection functions. Users can easily view the test results and set the test parameters in the Android or iOS app. The equipment can adjust the KH value according to the test results automatically.
Key Features:
It includes a 2.8-inch display screen
Features high-precision pump heads
Automatically completes the test and adds KH reagent according to the results
Supports two detection modes: automatic test and manual test
Supports pump flow calibration and pH calibration
Includes a real-time clock, which runs automatically according to the set parameters, and the power down parameters are not lost
Support iOS and Android with remote WiFi and local Bluetooth control
Support the solution bottle capacity monitoring function, and push the alarm when the solution bottle capacity is insufficient
Support the function of alarm push
Seawater sampling interface, connected to sea water tank
Add KH detection reagent interface and connect to KH detection reagent barrel
Add KH inlet and connect KH bucket
Add KH outlet, connected to sea tank
Waste water outlet, connected to waste liquid drum
Communication interface, standby
Power supply DC12V 1.9A
Display
pH Electrode
pH electrode fixing cover
Beaker
Magnetic stirring rotor
Application occasion
Marine biologicalfeeding. It includes hard bone coral (SPS), soft coral (LPS) and polyculture coral (SPS / LPS).
Other occasions requiring KH test and KHmaintenance
Software function
It includes automatic and manual working modes
1-24 tests per day in automaticmode
Reagent bottle remaining quantity monitoring function
Alarm push function
Automatic supplement KH function
Calibrate pump and pH function
Product installation1. Install the beakerAfter receiving the equipment, the user should put the beaker on the equipment for use.
Gently pull out the pH electrode and put the magnetic stirring rotor into the
Put the pH electrode and waste liquid discharge pipe into the beaker, then plug theminto the fixed position, and the installation is completed.
The position of the waste liquid discharge pipe depends on the inner wall of the beaker to prevent the magnetic rotor from touching the waste liquid discharge pipe when rotating.2. Configuration solutionIf the KH detection reagent that can be used directly is purchased, this step can be ignored. The following describes the dilution method of KH detection reagent concentrate.
The electronic scale measures 980G RO 980G water corresponds to 980ml water. RO water can be obtained from the water dispenser. Note that the reagent barrel should be peeled on the electronic scale before taking water.
Pour a bottle of KH concentrate into 980G water and gently shake the reagent
Pour the mixed reagent of water and concentrated solution in the second step into the concentrated solution bottle and rinse the concentrated solutionbottle
Pour the rinsed liquid back into the reagentbarrel
Repeat steps (3) and (4) once to complete the dilution of the concentrate.
The X5 S dosing pump is the first 5-channel WIFI dosing pump from Kamoer.With the app remote control, the X5 S dosing pump can flexibly and accurately replenish the aquarium with the various elements needed for the growth of marine life. ★ Smallest form factor ★ Remote control via app, support iOS & Android ★ Safe and reliable with waterproof connectors ★ Colorful pump heads with high quality PharMed BPT tube ★ Each pump head can calibrate flow rate ★ Built-in temperature detection ★ Settings saved and clock keeps running by battery if power lost ★ Upgrade firmware via OTA ★ Support access to Kamoer controller system
Basic ParametersName Size Net weight X5S Dosing pump 285 × 91 × 60mm 878 g Volume range Passage Accuracy ＞37ml/min 5 KXF pump heads ＜±0.5% Power Adapter: Input: 100 V-240 V AC; Output: DC 12V 2 A Interface: WIFI communication interface Frequency: 24 times / day; 1 time / 99 days Surroundings: Temperature 0-70℃; Humidity 10%-90% Storage: Temperature-20℃-85℃; Humidity 10%-90% Volume range: 0.1ml-9999ml
More Details1. KXF pump head 2. Water intlet 3. Water outlet 4. WIFI status indicator 5. Pump running status indicator 6. Reset button 7. Hanging mounting hole 8. Temperature sensor cable 9. Power supply waterproof connector(DC12V2A)
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Kamoer ATO One 2 Smart Auto Top Off System for Aquarium ATO One 2 is an intelligent water replenishment device, is an upgraded version of ATO One.ATO One 2 SE is the standard version with submersible pump, it only needs to install the sensor and submersible pump, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 SE has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 SE will have indicator light and buzzer alarm.ATO one 2 RO is the version of solenoid valve. It only needs to install the sensor and solenoid valve, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 RO has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 RO will have indicator light and buzzer alarm.
ATO One is a smart water replenishing device for meeting the needs of using RO water filter system. As long as the sensors and tubing are installed, it can work after powering on without any settings. The sensor uses a magnetic stand for easy installation and adjustment. The standard 1 channel optical level sensor is used to monitor the water level to determine whether it needs to be replenished. A 1-way float sensor is used as standard to prevent overflow. The ATO One for RO has various status indicators and audible and visual alarms.
What's in the box?1x ATO One controller1x S1 Float sensor1x S2 Optical sensor1x Optical sensor bracket1x Float sensor bracket4x Plastic magnetic stickers1x DC 12V Power supply1x Solenoid valve1x Tube holder1x Siphon break2x PVC tubingWarrantyWe warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must be furnished.The followings are excluded from the warranty:1. Improper use of the device causing malfunction;2. The device is repaired or modified by an unauthorized person;3. Use of non-produced material by our company i.e. pump tube;4. Damage by disaster;5. Improper maintenance causing damage;6. Use of reagent or sample causing corrosion;7. Damage by accident or over load;8. Consumables, such as silicone tube and fuse etc.
Kamoer ATO One SE is a smart water replenishing device for meeting the needs of using freshwater reservoir. As long as the sensors and refill pump are installed, it can work after powering on without any settings. A Kamoer standard 1 optical level sensor is used to monitor the water level to determine whether water needs to be replenished, whilst the Kamoer standard 1 float level sensor is used to prevent overflow.
An optional float level sensor is available to monitor the freshwater reservoir for water shortage.The Kamoer ATO One SE is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One SE will have an indicator light and a buzzer alarm. Package Includes:
Controller
The controller comes with 2 level sensors: Float sensor (S1) and Optical sensor (S2)
Optical bracket (large mouth) x 1
Float bracket (small mouth) x 1
Plastic magnet x 4
Power Adapter x 1 DC 12V 1A Support US/EU/GB/ AUS standard
Refill Pump x 1 For refilling water
Tube Holder x 1 For fixing water pipes
Siphon Break x 1 1/4straight through to prevent siphoning
PVC pump tube x 2 m Pipe diameter 8x11mm
Quick Start Guide
InstallationStep 1: Mount the optical sensor (S2) to normal water level. Note that the optical level sensor should be away from the air bubbles, otherwise it will be misunderstood due to interference.Step 2: Mount the float sensor (S1) above normal water level. If the water level reaches this position, it means that the optical sensor has failed, the device will alarm and force the refill pump to stop working. Note that the float sensor bracket cannot be reversed and should be away from the floater, otherwise the plastic magnet will interfere with the sensor signal;Step 3: Connect ATO refill tube(Pump<-> Siphon Break <-> Tube Holder)。Note the siphon break should be installed in the freshwater reservoir and ensure that it is higher than the position of the liquid level of the freshwater reservoir at any time.Step 4: Connect the refill pump’s cable to the Pump jack; Note that there is a valve control flow on the make-up water pump net cover, which is set to the required position according to the actual use.Step 5: Connect the adapter’s cable to the DC12V jack and power up the adapter.Please Note:
Please use the power adapter that comes with the product.
The optical liquid level sensor is susceptible to the influence of dirt. Please pay attention to erasing the dirt on the sensor.
This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and humidity <80%.
Replacement 6-roller head assembly for the Kamoer FX-STP Dosing Pump. Over time it is common for the rollers to start to wear and cause additional friction, which can slow the pumps motor and require additional electricity to operate. We recommend changing the pump head assembly every 9000 hours, or as needed.
What's Included?1x FX-STP Dosing Pump Head
Dosing pump heads do not last forever, and on average, the Kamoer Dosing Pump heads can last up to 2000 hours of run time. After that, there is a good chance that the lubricant on the tube and rollers will start to dissipate and cause more resistance and wear for the motor driving that channel. Maintaining the heads on the dosing system will help keep the motors running longer while providing more precise dosing.Replacing the head only takes a few seconds, and start by removing the input and output dosing tube from the head that needs to be replaced. Then by pinching the tabs at the base of the head, you can pull it away from the dosing pump body. Inserting the new one is just as easy, slide it over the motor spindle until it clicks into place, then reattach the dosing tubes and you are ready to go.What's Included?1x Replacement Kamoer Dosing Pump Head
