Ammonia and ammonium are substances which should be converted rapidly into nitrite followed by nitrate and nitrogen gas.If this does not happen then the aquarium is not fully cycled or biological processes are not proceeding as they should.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 50 measurements.
Can detect 0.5ppm of total ammonia easily
The Salifert Ammonia test is very straightforward and measures the sum of toxic ammonia and ammonium in just a few minutes.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Many nitrate test kits are prone to amine interference. This can give results much lower than actual.The Salifert nitrate test does not suffer from such as amine interference. The very special ingredients allow a very fast and precise measurement.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 60 measurements.
The range spans from very low to a very high nitrate concentration (approx. 0.05 – 20 mg/L as Nitrate-Nitrogen or 0.2 – 100 mg/L as nitrate ion).
Salifert’s Nitrite test kit does not suffer from such as amine interference because very special ingredients are used.These same ingredients also result in a full colour development within minutes. The developed colour is very intense making detection of even minute traces of nitrite easy. It probably is the most sensitive, accurate and fastest nitrite test kit available.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 60 measurements.
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Salifert’s calcium test is capable in resolving the calcium content in 10 mg/L steps. The colour change is sharp and facilitates the detection of small but highly significant fluctuations in the calcium concentration. Salifert is the only one in offering a true accuracy and precision as claimed.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 50-100 measurements.
Salifert's Coral Calcium additive is manufactured using a very special procedure. This results in a highly concentrated additive that not only makes calcium addition easy, it also avoids that the ionic balance is disturbed when used in combination with KH + pH Buffer or any other sodium based buffer.
Red Sea Marine Care Multi Test Kit is Complete multi-test pack including all of the tests necessary to monitor the biological maturation of new systems and for the ongoing maintenance and algae management of fish-only aquariums.
The Marine Care Multi Test Kit includes the tests pH, KH, ammonia, nitrate and nitrite in a durable, chemical-resistant plastic box.
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Salifert magnesium test is very straightforward and does not suffer from calcium and strontium interferences when within certain bounds. It measures in sufficient accurate steps of 30 mg/L with a sharp color change.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 50 measurements.
The Salifert liquid-magnesium additive does not imbalance the system and is ultra pure. Salifert was the first in offering such an additive.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Phosphate has several negative effects if present in a too high concentration. First of all undesirable algae growth might result. Making an aquarium an unpleasant sight.
Phosphate also blocks or retards the growth of corals and calcareous algae.
One of the scientific studies shows that a phosphate concentration higher than 0.05 mg/L decreases the growth of calcareous algae by 90%!
Washing fish food, which is a rich source for phosphates in a sieve after thawing reduces the input of phosphate tremendously. Also avoiding use of phosphate-rich low-grade activated carbon helps keep phosphate levels as low as possible. Checking the activated carbon for phosphate prior to use is therefore highly recommended.
7 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The pH value can have a major impact on the growth of corals and calcareous algae and on many biological processes. The pH should not be allowed to fluctuate more than approx. 0.3 units during 24 hours and should preferably be kept between 8.0 and 8.2.
If the pH is too low then the cause may be a too low alkalinity and/or insufficient aeration.
A low pH can be corrected by improving aeration and by increasing the alkalinity to NSW (Natural seawater) value or upto approx 25% above NSW levels.
The Salifert pH test kit is sufficiently accurate to monitor pH fluctuations of approx 0.2 pH units. Our KH + pH Buffer allows fast and efficient correction of alkalinity.
Approx. 50 tests per kit. Range pH 7.4 - 8.6.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Salifert KH/Alkalinity test is very straightforward. It measures in sufficient small steps of 0.1 meq/L or 0.3 dKH with a sharp color change. This makes detection of important yet small change possible.
Reasons to choose Salifert Test Kits:
Easy to use
Accurate
The kit can perform approx. 100-200 measurements.
Red Sea’s FOUNDATION PRO Multi Test Kit includes high accuracy titration tests for the accurate measurement of the elements calcium, magnesium and alkalinity (KH) which are the basic foundation elements of coral skeletons.
All of these elements need to be available in balanced proportions for sustainable successful coral health and growth.
Red sea’s FOUNDATION PRO Multi Test Kit enables accurate dosing of the FOUNDATION ELEMENTS Supplements, which are part of the complete Red Sea Reef Care Program.
Red Sea’s FOUNDATION PRO Multi Test Kit includes high accuracy titration tests for the accurate measurement of the elements calcium, magnesium and alkalinity (KH) which are the basic foundation elements of coral skeletons.
All of these elements need to be available in balanced proportions for sustainable successful coral health and growth.
Red sea’s FOUNDATION PRO Multi Test Kit enables accurate dosing of the FOUNDATION ELEMENTS Supplements, which are part of the complete Red Sea Reef Care Program.
Product information "HI98319 Waterproof Marine Salinity Tester"
Designed to bring simplicity to salinity testing during the any process, the HI98319 Marine Salinity Tester measures conductivity (EC) to determine the salinity of natural and artificial seawater. Within seconds, the salinity and temperature are digitally displayed on the LCD.
Displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.).
Comes with all the necessary solutions and batteries- everything you need to get started measuring right away.
Ideal for testing salinity in aquariums, field, and industrial settings.
Better Features for Better Testing
An onscreen stability indicator ensures the highest level of confidence in your results. The selectable auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Pocket Sized
The compact size makes the HI98319 Marine Salinity Tester ideal for on-the-go testing. The multilevel LCD display provides at-a-glance salinity and temperature readings from any angle while dual button operation streamlines the testing process for any user.
Long Battery Life
The included CR2032 Li-ion battery provides up to 100 hours of continuous use. The battery icon will blink to let you know it is time to change the battery so you never miss a measurement.
Graphite Sensors
Unlike stainless steel sensors, graphite sensors reduces polarization effects and does not oxidize for more reliable and accurate readings.
Durable Casing
Designed to withstand the knocks, drops, and spills of real life, the waterproof body ensures top performance in any environment. These meters are totally protected against dust and water intrusion from any direction.
Integrated Temperature Probe
Conductivity measurements are very sensitive to temperature variations. HI98319 has an exposed temperature sensor to ensure fast, accurately compensated readings even during sudden temperature fluctuations.
We believe that buying a tester should be simple. Your HI98319 Marine Salinity Tester is equipped with everything you need for successful testing right out of the box.
35.00 ppt Calibration Standard Sachet Solution (4)
When performing a calibration it is important that the correct buffers are used. We include some starter buffer to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.
Protective Case
Your tester comes with a complimentary carrying case to keep your tester safe from potential drops or bumps when not in use.
Specifications
Range
0.0 to 70.0 ppt (g/L)
0.0 to 70.0 PSU
1.000 to 1.041 S.G.
Resolution
0.1 ppt (g/L)
0.1 PSU
0.001
Accuracy
±1 ppt for 0.0 to 40.0 ppt; ±2 ppt for readings over 40.0 ppt
±1 PSU for 0.0 to 40.0 PSU ; ±2 PSU for readings over 40.0 PSU
±0.001 S.G.
Temperature Range
0.0 to 50.0°C; 32.0 to 122.0°F
Temperature Resolution
0.1°C; 0.1°F
Temperature Accuracy (@ 25°C/77°F)
±0.5°C; 1°F
Calibration
automatic, single point 35.00 ppt
Method
ppt - International Oceanographic Tables
PSU - Standard Methods for the Examination of Water and Wastewater, 2510 B, Electrical Conductivity Method
S.G.- Standard Methods for the Examination of Water and Wastewater, 2510 C, Density Method
Weight
68 g (2.4 oz.) without battery
Temperature Compensation
automatic from 5 to 50.0 ºC
Battery Type / Life
CR2032 3V Li-Ion (1 pc.)/ approximately 100 hours of continuous use
Environment
0 to 50 °C (32 to 122 °F); RH max 100%
Ordering Information
Each meter is supplied with: CR2032 battery (inside the meter), Storage / Protection sleeve, Instruction manual, Quality certificate, and 35.00 ppt calibration standard sachet (4 pcs.)
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea Ammonia Marine Test Marine Kit is an advanced colorimetric test measuring the total ammonia (NH3/NH4) in marine aquariums to an accuracy of 0.2 ppm.
Red Sea Ammonia Marine Test Kit simple to use test kit is essential during the initial stage of the biological maturation of all marine and reef aquariums.
Red Sea Ammonia MarineTest Kit Includes 100 tests.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The easiest way to monitor aquarium water parameters is by using the hygger aquarium water test kit, which is a one-touch water test strip. Instead of any clean-up and mess, just dip the test strip in the water, take it out, and read the result. With this fish water test kit, you can assess, diagnose, and remedy the problem without losing too many fish.
It can monitor ammonia level PH value and test for 8 water parameters to help improve your aquarium world, quick, simple, accurate reading. This fish water test kit can be used in freshwater & saltwater aquariums and ponds.
The following can cause your results to be inaccurate1. Exposure to moisture2. Touching the pads with your fingers3. Improper storage
Luckily, it comes with a little charcoal bag inside to keep out moisture.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea KH/Alkalinity Pro Titration Test Kit (75 Tests)
This Test Kit is an advanced titration test, measuring the level of buffers in your reef aquarium to an exceptionally high resolution of 0.025 meq/l, making this kit a must have for any reef keeper. This test kit enables the accurate dosing of Red Sea's Reef Foundation B supplement (buffer) which is part of the complete Red Sea Reef Care program.
Introduction to pH & Alkalinity:
The pH is a very important parameter in the biology of aquatic organisms. It is a measure of the acidity or basicity of the water. The scale runs from zero to 14. Zero is the most acidic, 7 is neutral and 14 is the most basic. A change of 1 pH unit, for example from 7 to 6, means that the water gets 10 times more acidic.Due to its chemistry, salt-water is able to absorb a certain amount of acidic matter without a resulting change in pH. The substances in the water that do this are called buffers. The ability of water to withstand changes in pH is called buffer capacity. Based on a method of measuring buffer capacity it is referred to as the alkalinity of seawater. In some of the literature alkalinity is termed “Carbonate Hardness” or “ KH Carbonate Buffer”. This is exactly the same measurement as is measured in the Alkalinity Mini-Lab Test.pH and Alkalinity
The pH of natural seawater varies geographically in the world’s oceans between 8.1 and 8.4. On a local scale the pH is however remarkably stable. This is due to dissolved buffers (mainly bicarbonates), which prevent pH changes. Because of the enormous volume of the ocean, a nearly inexhaustible stock of buffers are present: the sea can take up large amounts of acids, without a noticeable change in pH.Compared to the sea the volume of a marine aquarium is very limited and therefore the alkalinity is also limited. As fish produce acid waste products and as the buffering substances are used up by calcareous algae and invertebrates, the buffer capacity may become so low that the pH could suddenly fall. This would be very dangerous to all organisms in the aquarium.The alkalinity is measured in so called mil-equivalents of alkaline substances (for example sodium bicarbonate) per liter. These alkaline substances have the power to prevent pH drops. The alkalinity of natural seawater is approximately 2.5 mil-equivalents per liter. This level should also be maintained in the marine aquarium.A common symptom of an unsuitable pH is pH-stress. Especially in the marine aquarium, unsuitable pH values are very stressful to fish, and increase the chance of the fish being susceptible to disease (marine white spot).
This Test Kit comes complete with:
Robust housing,
Glass Test Vial,
Color comparison chart,
Titrator included (easy to use, single hand, high precision tritator),
100ml sample of Reef Foundation B,
60ml of KH Buffer,
test up to 75 times,
In depth instruction manual.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s colorimetric Phosphate Marine Test kit provides a quick and reliable measurement of Phosphate in your aquarium to an accuracy of 0.1ppm PO4.
This test kit, in conjunction with Red Sea’s Nitrite/Nitrate test kit, enables dosing of NO3: PO4- X (Biological Nitrate and Phosphate reducer)
Red Sea Phosphate Marine Test Kit Includes 100 tests.
Red Sea pH/Alkalinity Marine Test Kit – A dual test kit includes an accurate (1 dkH/0.36 meq/l) titration test for KH and a colorimetric test for pH for monitoring these essential parameters in all marine aquariums.
The Red Sea’s KH\ALKALINITY PRO test kit enables accurate dosing of Red Sea’s KH Coralline Gro or KH/ALKALINITY Foundation B Buffer Supplements in fish-only systems.
Includes pH 100 tests, KH 55 tests.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s Nitrate Pro Reef Test Kit is an advanced colorimetric test with comparator, measuring the level of nitrate in your reef aquarium to an exceptionally high accuracy of 0.12ppm NO3.
Nitrate Pro Reef Test Kit , when used in conjunction with the Phosphate Reef Pro Kit, enables accurate dosing of Red Sea’s NO3:PO4– X (biological nitrate and phosphate reducer) which is part of the complete Red Sea Reef Care Program.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s user-friendly Magnesium titration test provides a quick and reliable measurement of Magnesium in your aquarium to an accuracy of either 50ppm or 100ppm according to your needs.
Kit includes easy to follow graphic instructions and conversion tables for immediate interpretation of results.
Red Sea Magnesiun Test Kit Includes 75 tests.
Kamoer Qijian 2 is an intelligent monitoring and control system for aquarium organisms. It provides a flexible and easy-to-expandable intelligent control solution, allowing you to more conveniently carry out aquarium-related maintenance work and have more time to enjoy life. Beautiful.
The system contains 1 pH, 1 EC, and 1 temperature detection to monitor water quality. You can view the sensor value or historical value and historical value change curve through the Aqua Cloud App; if the value is abnormal, the smart controller will report The App on the smartphone pushes sensor abnormal alarms to alert users.
1. Electrical conductivity (EC) electrode interface2. pH electrode interface3. Temperature electrode interface4.DC5V 4A power supply5. LAN interface (10/100M Ethernet interface, wired)6. USB interface (note: the USB interface in the lower left corner is temporarily unavailable)7. It can be used as a CAN interface (CAN device access port, for example, connect to Kamoer smart socket P8 through a cable), or RS485 interface (RS485 device access port, for example, connect to an X4 dosing pump through a cable)8. pH electrode9. Conductivity (EC) electrode10. Temperature electrode
The Kamoer KH Carer is an automatic testing device measuring KH values (Alkalinity) in an aquarium. It includes manual and automatic detection functions. Users can easily view the test results and set the test parameters in the Android or iOS app. The equipment can adjust the KH value according to the test results automatically.
Key Features:
It includes a 2.8-inch display screen
Features high-precision pump heads
Automatically completes the test and adds KH reagent according to the results
Supports two detection modes: automatic test and manual test
Supports pump flow calibration and pH calibration
Includes a real-time clock, which runs automatically according to the set parameters, and the power down parameters are not lost
Support iOS and Android with remote WiFi and local Bluetooth control
Support the solution bottle capacity monitoring function, and push the alarm when the solution bottle capacity is insufficient
Support the function of alarm push
Seawater sampling interface, connected to sea water tank
Add KH detection reagent interface and connect to KH detection reagent barrel
Add KH inlet and connect KH bucket
Add KH outlet, connected to sea tank
Waste water outlet, connected to waste liquid drum
Communication interface, standby
Power supply DC12V 1.9A
Display
pH Electrode
pH electrode fixing cover
Beaker
Magnetic stirring rotor
Application occasion
Marine biologicalfeeding. It includes hard bone coral (SPS), soft coral (LPS) and polyculture coral (SPS / LPS).
Other occasions requiring KH test and KHmaintenance
Software function
It includes automatic and manual working modes
1-24 tests per day in automaticmode
Reagent bottle remaining quantity monitoring function
Alarm push function
Automatic supplement KH function
Calibrate pump and pH function
Product installation1. Install the beakerAfter receiving the equipment, the user should put the beaker on the equipment for use.
Gently pull out the pH electrode and put the magnetic stirring rotor into the
Put the pH electrode and waste liquid discharge pipe into the beaker, then plug theminto the fixed position, and the installation is completed.
The position of the waste liquid discharge pipe depends on the inner wall of the beaker to prevent the magnetic rotor from touching the waste liquid discharge pipe when rotating.2. Configuration solutionIf the KH detection reagent that can be used directly is purchased, this step can be ignored. The following describes the dilution method of KH detection reagent concentrate.
The electronic scale measures 980G RO 980G water corresponds to 980ml water. RO water can be obtained from the water dispenser. Note that the reagent barrel should be peeled on the electronic scale before taking water.
Pour a bottle of KH concentrate into 980G water and gently shake the reagent
Pour the mixed reagent of water and concentrated solution in the second step into the concentrated solution bottle and rinse the concentrated solutionbottle
Pour the rinsed liquid back into the reagentbarrel
Repeat steps (3) and (4) once to complete the dilution of the concentrate.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Advanced titration test measuring the level of calcium in your reef aquarium, with exceptionally high accuracy of 5 ppm
Ca
Red Sea’s CALCIUM PRO Reef Test Kit is an advanced calcium titration test, measuring the level of calcium in your reef aquarium to an exceptionally high accuracy of 5 ppm.
This test kit enables the accurate dosing of Red Sea’s Reef CALCIUM + Foundation A (calcium/strontium) and Trace Colors supplements, which are part of the complete Red Sea Reef Care Program.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s CALCIUM PRO Reef Test Kit is an advanced calcium titration test, measuring the level of calcium in your reef aquarium to an exceptionally high accuracy of 5 ppm.
This test kit enables the accurate dosing of Red Sea’s Reef CALCIUM + Foundation A (calcium/strontium) and Trace Colors supplements, which are part of the complete Red Sea Reef Care Program.
Red Sea’s Algae Control Pro Multi Test Kit includes high accuracy colorimetric comparator tests for the exceptionally high accuracy measurement of nitrate and phosphate.
The nitrate & phosphate tests are essential for the accurate dosing of Red Sea’s NO3: PO4– X (biological nitrate & phosphate reducer) which is part of the complete Red Sea Reef Care Program.
