2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Single stage regulator with adjustable pressure will reduce the high pressure of a CO2 cylinder to a lower and usable pressure for use in the aquarium. The ability to adjust the working/output pressure ensures the regulator will be able to meet the needs of any aquarium requirements; whether that is operating a single CO2 diffuser, or multiple diffusers, this regulator can be adjusted to deliver the pressure that's needed.A high-precision needle valve is fitted as standard, which gives you easy and incredibly accurate control of CO2 dosing. As a result, the regulator is suitable for small/nano aquariums as the bubble rate (dose) can be reduced as low as 1 bubble / 10 seconds.Because the needle valve can rotate, the regulator can be used with either horizontal or vertical cylinder valves. The stem/nut can also be removed and can then connect to nano cartridges, making the regulator suitable for nano aquariums, and much larger aquariums.The integrated solenoid valve provides the ability to automatically shut off the CO2 at timed intervals, e.g. to sync with the aquarium lighting. This ensure CO2 is not being dosed when it's not needed, and will therefore extend the lifespan of your CO2 cylinder and save money. The 12v DC solenoid (mains transformer included) provides safe, low temperature, and guaranteed no noise operation.Dual pressure gauges indicate the cylinder pressure and the output / working pressure.
Instructions
Tighten the regulator to your CO2 cylinder using a spanner or wrench. Do not use your hands to tighten, it will not create sufficient seal and be likely to leak.
Set the output pressure to minimum by turning the pressure adjuster knob fully anticlockwise.
Close the needle valve by turning fully clockwise.
Plug the solenoid into a mains socket and switch on.
Open the flow of gas from your CO2 cylinder.
The cylinder pressure gauge will now indicate the pressure of the cylinder. Turn the pressure adjuster clockwise until it reads 40PSI, which is a good starting point for a single diffuser installation.
With the bubble counter attached, turn the needle valve anticlockwise to achieve the bubble rate desired. 1 bubble / second is suitable for a 150L aquarium - adjust your dosing in accordance to this, i.e. 2 bubble / second for 300L aquarium.
Strideways Pro CO2 regulator is a professional system that comes equipped with a failsafe mechanism for added safety measures, robust construction, very precise needle valve and includes a bubble counter for simple and precise management of CO2 levels.
Designed for use with standard DIN477 (Top or sideways installation) and sodastream CO2 cylinders it also offers a DC solenoid valve, for a high durability and low heating operation.
Recommended working pressure 0,25 – 0,30 MPa.
3 Year Warranty
Professional CO2 regulator for the accurate dosing of CO2 to the aquarium. Equipped with a 12V solenoid valve and CO2 bubble counter. Complete set, ideal for beginners with quality for professionals.
CO2 adjustment is flawless with this CO2 regulator. The working pressure can be set precisely with the flick of a wrist on the comfortable button. For adjusting the desired number of bubbles, there is a pleasant to operate fine adjustment on the side. The result is immediately visible in the linked CO2 bubble counter. This can be tilted 360 degrees. The bubble counter can therefore be positioned upright at all times.
Close CO2 dosing at night
To be able to close the CO2 dosing at night, this CO2 regulator is equipped with an integrated 12V solenoid valve. This works on USB with included adapter for the wall socket. The power consumption, and in particular the heat output, is low due to the 12V. In addition, this provides extra safety around the aquarium. High-quality materials have been used. This can be felt directly by the weight. The sealing ring is also of ultimate quality and stronger than other rings on the market.
No understanding of CO2 dosing or getting a complicated system at home? No problem. Included is a wrench to tighten the CO2 regulator on the bottle. Always screw the CO2 regulator firmly on the bottle to prevent leaks. Furthermore, the installation is very simple and the system can be started up in a few steps. Always check the hoses and couplings for any leaks with dishwashing foam to make sure no CO2 is lost.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Patented, Variable Magnetic Circuit,High EfficiencyOperating Voltage : Full Range AC100V to 230V .Can Be High Speed Drive 6000 cycle/Minutewhile use DC150V.No Vibration Noise Sound from current flow.
Media
Air, Water, Oil inert gases
Operating method
Direct acting
Model
A2AD 2/2 way, A3AD 3/2 way
Effective Sectional area mm2 (CV)
4.9 (0.27)
Pipe joint size
1/8" / 1/4"
Viscosity
21c ST
Service pressure rangekgf/cm2 (psi)
0-20 (0-286)
Pressure resistancekgf/cm2 (psi)
30 (429)
Service Temperature range(atmosphere or fluid used)
-10 to 60ºC
Power consumption
AC 110V: 10VA /10mS. (inrush)0.25 VA (hold)AC 220V: 40VA / 10mS. (inrush)1VA (hold)
Insulation
F class
Rating
100%
Protection
IP65
Cable Plug
DIN 43 650 B, 0-250V
Body Material
Brass / Stainless steel
Seal Material
NBR, FPM
Weight (g)
170
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Strideways CO2 regulator PLUS is a professional system that comes equipped with a dual stage & dual gauge mechanism for safety measures and precise dosing.Robust construction, very precise needle valve and includes a bubble counter for simple and precise management of CO2 levels.
This modular CO2 system allows you to add more than one exit, completely Plug&Play, to offers the possibility of connecting one single bottle of CO2 to more than one aquarium.
Designed for use with standard DIN477 CO2 cylinders and it also offers a DC solenoid valve, for a high durability and low heating operation.
3 Year Warranty
Dual stage regulator, prevents end-tank-dump keeping your aquarium livestock safe and CO2 levels constant.
Allows a single CO2 cylinder to be split and distributed amongst multiple planted aquariums by using Strideways PRO CO2 Extender;
Very high precision adjustment, integrated needle valve with smooth and precise adjustment;
Heavy (Not light, like other cheap regulators made of aluminum), so not easily broken;
DC voltage power supply with German Certification. Low power (3W), IP65 solenoid valve;
Minimalist Design, product made for aquarists, beautiful and simple to use, not adapted from other industries;
High quality o-ring sealing. Two times more resistant compared with the ordinary PTFE sealing, transparent
