X2SR is a Wi-Fi controllable water change system. The user can remotely control it through the mobile phone App. The user can use the X2SR to automatically change the water in their own sea or fresh water tanks at a fixed time and quantitatively.The automatic water replenishment function can be completed through the submersible pump interface. In response to possible overflow risks, X2SR is equipped with an anti-overflow sensor as standard. When the water level reaches the anti-overflow sensor, an alarm will be triggered and the water supply and change will stop.
Basic Parameters
Flow: More than 900ml/min
Power Adapter Input: 100VAC -240VAC Output: DC24V 1.9A
Number of dosing: 24 times/day-1 time/99 days
Interface WiFi (App remote control)
Working environment: Temperatures: 0 - 70℃; Humidity: 10% - 90% (non-condensation)
Dimensions (LxWxH): 168x177x223mm (including pump head)
Weight: 4.106KG (not including power supply)
Packing List01 Host X2SR ×1 02 Power adapter body ×1(DC24V 1.9A) 03 Power adapter plug ×1(US/UK/EU/AU) ×1 04 Plastic cylinder (50ml) ×1 05 PVC tube 9.5*12.5mm; green 6m 06 Kamoer tube manifold Transparent ×3 07 Float level sensor(headphone plug) ×4 08 Float level sensor bracket ×4 09 Magnet (balck) ×8 10 Submersible pump(DC 24V) ×1 11 Male to male line ×1 12 PVC connecting pipe for auto top-off 8*11mm transparent 1.5m 13 Anti-siphon connector(1/4 straight) ×1 14 Grease ×10g ×1 15 Quick start guide ×1 16 Qualified certification ×1Various ApplicationsMore Details
Outlet of drain pump, connect to waste water bucket
Inlet of drain pump, connect to the fish tank
Outlet of refill pump, connect to the fish tank
Inlet of refill pump, connect to fresh sea water
DC24V pump, connect to submersible pump
Liquid level sensor for detecting whether fresh water is empty
Liquid level sensor for detecting whether waste water is full
Anti-overflow sensor for detecting whether the tank reaches the warning water level
Liquid level sensor used to maintain the normal water level of the fish tank
Reset button for configuring the network
DC24V IN, power input
Drain pump running indicator
Power/Wi-Fi status indicator
Refill pump running indicator
Button of Drain pump, long press the button to run
Button of Refill pump, long press the button to run
Installation Method01 App download Note: This App supports Apple devices with iOS9.1 and above, and Android devices with Android4.4 and above.02 Register account Open the App, select the mobile registration or email registration method, and follow the App prompts to complete the account registration.03 View tutorial On the device list page, click the icon "?" in the upper right corner to enter the "Tutorial" page. On the tutorial page, select "X2SR" to view the tutorial. The tutorial includes the user manual and Frequently Asked Questions.Indicator Light Description▲ Note: The X2SR uses red and yellow two-color indicator lights. When the yellow light is on or flashing, the red light is off.
The Kamoer X2S is a dual channel WIFI water change pump controlled by mobile app. Users can use the X2S to automatically change and replenish the water for their seawater or fresh water tank. The X2S is equipped with an anti-overflow sensor that triggers an overflow alarm when the water level reaches the anti-overflow sensor and the pump stops working. The X2S is equipped with two stepper peristaltic pump for continuous long-term use.
Highlights
Transfer pumps with stepper motors for longer life and more accurate operation
Anti-overflow sensor will trigger an alarm and stop the pump if the water reaches the sensor
Less water-changing connection lines, simple use
Support sedation of additional evaporative water
Pharmed BPT imported pump tube with standard, long life, heat, acid and alkali resistance, ozone and UV rays, anti-aging and oxidation
Up to 12 water change plans can be set up in a day to support 1-99 days of cycle water change
Support for flow calibration
Includes real-time clock, runs automatically according to setting parameters, and does not lose power-down parameters
Support for iOS and Android devices to control titration pumps via WIFI, and app upgrade titration pump firmware
Pump maximum distance 1.5m.
Dimensions: 220 x 160 x 95mm
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
KWC is an intelligent water replenishment and water change equipment, suitable for occasions such as water replenishment and water change in sea aquariums.The device can be controlled locally through the App. The device has an optical level sensor(Anti-overflow sensor). It is used to control the start and stop of equipment water replenishment and the overflow prevention of water change; It has a float level sensor(Waste liquid anti-overflow sensor).It is used to prevent the overflow of the waste liquid bucket ； It has three anti-dry-burning submersible pumps, namely, discharge waste water pump （ Q270-S ） , supplementary sea water pump（Q270-S, and supplementary fresh water pump（Q270-F）. When the replenishing water overflows, the replenishing bucket lacks water and the replenishing water is overtime, the KWC will have an indicator light and a buzzer to alarm.
P1:Discharge Sea water pump and Low liquid level detection(Q270-S)P2:Add Sea water pump and Low liquid level detection(Q270-S)P3:Add Fresh water pump and Low liquid level detection(Q270-F)S1:Refill and Anti-overflow sensorS2:Waste water Anti-overflow sensorT1:Tube HolderB1:Siphon BreakStep 1: The optical sensor (S1) is installed on the normal water level of the aquarium and use it as a water replenishment and anti-overflow sensor.Note that the optical level sensor should be far away from the place with bubbles, otherwise it will be interfered and misjudged;Step 2: The float sensor (S2) is installed on the top of the waste water bucket as an anti-overflow sensor. If the water level reaches this position, it means the waste water bucket is full, and the device will alarm to remind the waste water bucket to be full to prevent the waste water bucket from overflowing;Step 3: Connect the pipeline (refill pump-- siphon break -- tube holder). Discharge Sea water pump and Low liquid level detection（P1）is placed in the aquarium and connected to the waste water bucket through a pipeline; Add Sea water pump and Low liquid level detection (P2) is placed in a bucket of fresh sea water and connected to the aquarium through a pipeline; Add Fresh water pump and Low liquid level detection(P3) is placed in a fresh water bucket and connected to the aquarium through a pipeline.Step 4: According to the wiring harness label, connect the submersible pump to the corresponding interface The anti-dry burn identification sensor of the refill pump should be kept upward, so that when the water of the freshwater reservoir is insufficient, it can be timely found and alarm.Step 5: Plug the power adapter into the DC12V connector and power the power adapter. Note: The model of make-up fresh water pump is Q270-F, and the model of waste water pump and make-up sea water pump is Q270-S. it cannot be installed reversely during use.
