2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Smart ATO Duo is a compact auto top off system for both nano and medium aquariums. Combined two precise sensors in one pack with a touch controller and integrated with QST (Quick Security Technology), which provides real-time protection against any failure and detects water empty, Smart ATO Duo offers you an easy, safe and efficient choice of auto top off systems.
Features:
The smallest ATO system currently available
Suitable for nano / medium aquariums
Extremely easy to install with integrated magnetic mount
No moving parts to fail
Dual-optical level sensor in one pack provides dual protection
Touch controller shows operation status
QST (Quick Security Technology) provides real-time failsafe protection against failure
Audible and LED light alarm
Everything needed is included
Includes:
Smart ATO Duo Controller x 1
Power Adapter x 1
DC Refill Pump x 1
Universal Tube Holder x 1
Siphon Break x 1
Tubing 6.5 ft (200 cm) x 1
Specifications:
Power Input : 100-240 VAC, 50-60 Hz
Cable Length of Power Adapter: 6 ft (180 cm)
DC Pump :
Head : 8.2 ft (250 cm)
Flow Rate : 74 gph (280 lph)
Max Mounting Thickness : 1/2 inch (12.7 mm)
Power : 4.5 W @ DC 12 V
Pump Cord Length : 6 ft (180 cm)
Flexible Tubing Size : ID : 6.5 mm / OD : 9.0 mm
Length of Cable between Sensor and Controller : 6 ft (180 cm)
Kamoer ATO One SE is a smart water replenishing device for meeting the needs of using freshwater reservoir. As long as the sensors and refill pump are installed, it can work after powering on without any settings. A Kamoer standard 1 optical level sensor is used to monitor the water level to determine whether water needs to be replenished, whilst the Kamoer standard 1 float level sensor is used to prevent overflow.
An optional float level sensor is available to monitor the freshwater reservoir for water shortage.The Kamoer ATO One SE is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One SE will have an indicator light and a buzzer alarm. Package Includes:
Controller
The controller comes with 2 level sensors: Float sensor (S1) and Optical sensor (S2)
Optical bracket (large mouth) x 1
Float bracket (small mouth) x 1
Plastic magnet x 4
Power Adapter x 1 DC 12V 1A Support US/EU/GB/ AUS standard
Refill Pump x 1 For refilling water
Tube Holder x 1 For fixing water pipes
Siphon Break x 1 1/4straight through to prevent siphoning
PVC pump tube x 2 m Pipe diameter 8x11mm
Quick Start Guide
InstallationStep 1: Mount the optical sensor (S2) to normal water level. Note that the optical level sensor should be away from the air bubbles, otherwise it will be misunderstood due to interference.Step 2: Mount the float sensor (S1) above normal water level. If the water level reaches this position, it means that the optical sensor has failed, the device will alarm and force the refill pump to stop working. Note that the float sensor bracket cannot be reversed and should be away from the floater, otherwise the plastic magnet will interfere with the sensor signal;Step 3: Connect ATO refill tube(Pump<-> Siphon Break <-> Tube Holder)。Note the siphon break should be installed in the freshwater reservoir and ensure that it is higher than the position of the liquid level of the freshwater reservoir at any time.Step 4: Connect the refill pump’s cable to the Pump jack; Note that there is a valve control flow on the make-up water pump net cover, which is set to the required position according to the actual use.Step 5: Connect the adapter’s cable to the DC12V jack and power up the adapter.Please Note:
Please use the power adapter that comes with the product.
The optical liquid level sensor is susceptible to the influence of dirt. Please pay attention to erasing the dirt on the sensor.
This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and humidity <80%.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Kamoer ATO One 2 Smart Auto Top Off System for Aquarium ATO One 2 is an intelligent water replenishment device, is an upgraded version of ATO One.ATO One 2 SE is the standard version with submersible pump, it only needs to install the sensor and submersible pump, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 SE has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 SE will have indicator light and buzzer alarm.ATO one 2 RO is the version of solenoid valve. It only needs to install the sensor and solenoid valve, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 RO has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 RO will have indicator light and buzzer alarm.
11 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Not Just an Auto Top Off System...It's so Much More!
Reliable Auto Top Off System
Built-in Temperature Monitor
Leak Detector Included
ReefBeat App Connected
Not Just for Red Sea Aquariums*
*If you own a Red Sea Reefer Aquarium, check out the ReefATO+ Upgrade Kit instead.
Water Level Sensor
Ultra Reliable. The ReefATO+ sensor features a built-in backup sensor 1" above the primary sensors to automatically shut down the ATO pump in the event of an overfill. With multiple probes built onto the sensor, an indication of actual water level can always be seen on the ReefBeat App.
Temperature Monitoring
The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of ±0.1°. The ReefBeat App allows you to set a narrow “desired” temperature range, and a slightly wider “acceptable” range, that will be seen on-line in the ReefBeat App and in the full temperature logs. If the temperature goes outside the acceptable range, you will get a notification to your smartphone. The detailed logs will show you the minimum, maximum and average temperatures at 15-minute intervals for the past 28 days.
ATO Pump
Quiet, variable flow, 12 vdc ATO pump
Diameter of just 1.8” to fit inside small ATO reservoir openings
Max flow rate 75 gph, Max head 8’, power 6–10W
Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls, or if your RO reservoir runs dry
Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 18 gph. This ensures a splash proof and quiet flow of water into the sump
The noise damping rubber impellor chamber cover and impellor can be removed for pump maintenance
Includes locknut on the outlet hose barb for secure connection to the silicon tubing
Leak Detector
The highly sensitive, Reef-Spec leak detector (with saltwater resistant titanium probes) detects both saltwater and RO/DI water. If a leak is detected, the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device.
Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Smart Controller
Reliably control all the ReefATO+ components and connect them to the ReefBeat ecosystem where you can view the current water level in the pump chamber, see the number of fills and volume of water added to your aquarium over the last 28 days, monitor records of minimum/maximum/average aquarium water temperature over the last 28 days, and modify settings to meet your aquarium's needs. Connection to the ReefBeat App will also allow you to receive notifications if something goes wrong.
Installation Kit
Sensor holder and magnetic corner mounting bracket for 12mm ½” glass
10′ – 1/16″ thick silicone tubing (ID 5mm / 0.2″)
Silent flow – Tube holder (clips on 4 – 12mm / ½” glass)
Siphon Breaker
ATO One is a smart water replenishing device for meeting the needs of using RO water filter system. As long as the sensors and tubing are installed, it can work after powering on without any settings. The sensor uses a magnetic stand for easy installation and adjustment. The standard 1 channel optical level sensor is used to monitor the water level to determine whether it needs to be replenished. A 1-way float sensor is used as standard to prevent overflow. The ATO One for RO has various status indicators and audible and visual alarms.
What's in the box?1x ATO One controller1x S1 Float sensor1x S2 Optical sensor1x Optical sensor bracket1x Float sensor bracket4x Plastic magnetic stickers1x DC 12V Power supply1x Solenoid valve1x Tube holder1x Siphon break2x PVC tubingWarrantyWe warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must be furnished.The followings are excluded from the warranty:1. Improper use of the device causing malfunction;2. The device is repaired or modified by an unauthorized person;3. Use of non-produced material by our company i.e. pump tube;4. Damage by disaster;5. Improper maintenance causing damage;6. Use of reagent or sample causing corrosion;7. Damage by accident or over load;8. Consumables, such as silicone tube and fuse etc.
