12 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Comprehensive carbohydrate, vitamin, amino acid, and polyunsaturated fatty acid supplement for corals
Ascorbic acid in a base of chlorella
Makes a trace element supplement unnecessary
Overview
fuel™ is a comprehensive carbohydrate, vitamin, amino acid, polyunsaturated fatty acid, and trace element supplement developed to address nutritional requirements commonly associated with corals. fuel™ contains ascorbic acid in a base of chlorella, which contains a rich assortment of amino acids and vitamins. The health benefits of chlorella are widely known and while spirulina, a similar algae, has been regularly used in the industry, aquavitro is the first to utilize the vastly superior chlorella. fuel™ is formulated to provide nutrients available from natural tropical reef waters.
Chlorella is a unique algae that grows in fresh water. It is extremely high in enzymes, vitamins and minerals, including the full vitamin-B Complex. It is over-flowing with unsaturated fatty acids, amino acids, and proteins. There are also vitamins found in Chlorella including: Vitamin C, pro-vitamin A (B-carotene), thiamine (B1), riboflavin (B2), pyridoxine (B6), niacin, pantothenic acid, folic acid, Vitamin B12, biotin, choline, Vitamin K, lipoic acid, and inositol. Minerals in Chlorella include: phosphorus, calcium, zinc, iodine, magnesium, iron, and copper. It contains a higher level of amino acids than spirulina and is FDA approved for use with ornamental fish.
Sizes: 150 mL, 350 mL, 1 L, 4 L
Directions:
Shake well before using. Use 5 mL for every 80 L (20 US gallons) twice a week or as required to maintain coral growth.
8 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
A frequent occurrence in reef systems is low pH, while calcium and alkalinity are at optimal levels. Raise one and the others may fall. One of the primary reasons for this is an improper carbonate/bicarbonate ratio. The buffer ratio changes as a natural consequence of the buffer's ability to counteract acidifying sources such as organic acids (produced naturally from waste) or introduced from non-pH controlled husbandry products. In this case, adding more buffer would unnecessarily result in a rise in alkalinity and a drop in calcium. The first product of its kind, balance™ ends this see-saw effect. It resets this ratio by converting bicarbonate into carbonate in order to reassert a higher pH without affecting calcium level.
balance™ is an optimized blend of sodium and potassium hydroxides with a NSW ratio (27:1) of sodium to potassium to avoid ionic imbalance with long term use.
aquavitro offers other solutions designed to address the unique challenge of raising pH in a reef environment. Ions addresses the problem of low magnesium which is a cause of low buffering pK and pH. Eight.four addresses deficiencies in pK found in competing products by providing a properly balanced (carbonate/bicarbonate) buffer system.
Aquael Flow Heater is the first flow heater to have a Smart Heating System (SHS) – intelligent power selection technology. The microprocessor adjusts the heating power to maintain the right temperature in the aquarium.This solution allows the heater to work smoothly – without temperature jumps in the aquarium and exposing its inhabitants to stress. Thanks to the electronic thermostat, the LED display shows not only the programmed, but also the current temperature of the water.Electronic temperature sensors protect the aquarium from overheating, and when they detect the cessation of water flow – they automatically turn off the device. Its location on the exhaust hose of the external filter allows for even distribution of heated water throughout the tank. The heater is mounted outside the aquarium, so it does not take up space inside and gives more freedom of arrangement.
The first intelligent flow heater
Equipped with Smart Heating System – adjusts the heating power to the size of the tank and environmental conditions, using only as much energy as needed
It has an electronic precision thermostat, operating with an accuracy of ± 0.5, in the range from 20 to 33 ° C
You can set the temperature conveniently with one button – One Touch System
LED display indicates the programmed and current temperature
3 temperature sensors – 2 electronic, 1 thermal fuse
The heater automatically turns off when the water flow ceases
For use on hoses with a diameter of 16 / 22 mm in freshwater and marine aquariums
The set includes a heater, two stable fixing brackets and clamping nuts
Made in Poland
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
AmGuard safely, rapidly and efficiently detoxifies toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn't degrade for nearly 72 hours. That's at least twice as long as our competitors products. Unlike competing products, AmGuard converts it into a safe, non-toxic form that is readily removed by the tanks biofilter. It does not alter pH.
Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability® and Matrix. Use Ammonia Alert® or MultiTest Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard also removes chlorine and chloramines.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Our LR Reactors are made with the most robust material to ensure that they adhere above the industry standards of keeping in shape and watertight. With our unique Triangular LEDs placement eradicating blind spots couple with optimum spectrum guarantees a quicker growth rate.
Harvest timeline can be easily controlled via the adjustable light intensifier should you wish to slow down the growth rate. Bundled with a 3 Tiers Strainer Basket to make harvesting a breeze.
Available in 2 models – LR-150, LR-200
Warranty (against manufacturing defect):2 years* – pump motor only
Features & Benefits
Circulation Pump Included
Adjustable light intensity
IP67 Certified LEDs containment
Strainer Flip Stand – for easy maintenance
High-Quality Hand Made acrylic construction
Removable 3 tiers strainer container for easy harvesting
Perfectly balance of light spectrum for optimal Chaetomorpha growth
Unique Triangular LEDs Panels placement for a balance of 360 degrees coverage
What's included
LR-150
LR-200
Article Code
Items
Model No.
Qty
Model No.
Qty
1
Lights Holder
–
1
–
1
1.1
Holder Cover
2020100003
1
2020100003
1
1.2
O ring (22*5)
1050100024
1
1050100024
1
1.3
Holder
2020200020
1
2020200020
1
1.4
O ring (35*3)
1050100035
1
1050100035
1
2
Reactor Cover
–
1
–
1
3
Strainer
–
1
–
1
3.1
Screw (M5*15 )
1042500001
9
1042500001
9
3.2
Holder
2010100152
9
2010100152
9
4
O ring
1050100083
1
1050100087
1
5
Screw (M8*25)
1042500005
6
1042500005
8
6
Chamber
–
1
–
1
7
Threaded Nozzle
2020300009
1
2030200004
1
8
Pump (AQ-1200)
110203
1
110206
1
9
Threaded Nozzle
2030200004
1
4999900003
1
10
Outlet Nozzle
4030301002
1
–
1
11
O ring
1050100089
1
1050100090
1
12
Lights
1110400005
1
1110400005
1
13
Lights Adjustable Switch
1110400006
1
1110400006
1
14
Power Adapter
DC12V / 2A
1
DC12V / 2A
1
Technical Data
Lights Reactor
Product
Item No.
Wet/Dry
Diameter
Footprint
Height
Input Fittings
Barb Fittings
PVC Pipe
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
LR-150
130309
Both
150
5.9
230
205
9.1
8.1
510
20.1
17.0
5/8
20.0
1/2
LR-200
130310
Both
200
7.9
285
265
11.2
10.4
510
20.1
20.0
3/4
20.0
1/2
Product
Item No.
Output Fittings
Tank Volume
Power（w）
Pump
Barb Fittings
PVC Pipe
mm
inch
mm
inch
L
US Gal
LED
Pump
LR-150
130309
20.0
3/4
20.0
1/2
200-600
52-158
18
15
AQ-1200
LR-200
130310
20.0
1/2
25.0
3/4
500-1000
132-264
18
45
AQ-2000
25.0
1
Circulation Pump
Product
Model No.
Wet/Dry
Power
Max Head Height
Maximum Flow Rate
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
W
W
m
Ft.
m
Ft.
LPH
GPH
LPH
GPH
LR-150
AQ-1200
Both
10
15
1.1
3.6
1.3
4.3
1300
343
1287
340
LR-200
AQ-2000
Both
42
45
2.0
6.5
2.1
6.9
2000
528
2203
582
Electrical or other CertificationPumps (AQ) – CE & PSE certifiedLights – CE certified
Explosion Charts
Explosion for LR-150
Explosion chart for LR-200
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Feature
Bubble Magus BP-100 BIO-PELLETS Media Filter is suitable for most filter media including zeolite, bio pellets, activated carbon or filter rock.
For medium to Big Tank Use
Suitable for Rowaphos or Biopellets
Specification
Power 220V-240V 50Hz 11W Power
Rock WP600 Pump
Size 146 x 179 x 450mm
1.5Litres Volume for Bio-Pellets
Weight: 2.9 kg
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s highly-anticipated ReefDose redefines ease-of-use and smart functionality for aquarium dosing pumps, offering advanced programming and incredible dosing accuracy for the most demanding applications. The ReefDose was built from the ground up to meet the needs of modern reef aquarists. Utilizing Red Sea’s custom-built dosing heads, the ReefDose is capable of delivering incredible single-drop precision through a variety of dosing programs. The three dosing speed settings offer additional versatility, prioritizing whisper quiet operating at up to 15mL per minute, all the way up to 45mL per minute with Turbo mode.
Features
Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of ± 0.05ml or an average deviation of 0.5% (over 10ml).
4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule.
Easy assembly click-on/off dosing heads (no tools or alignment required).
Automatic delay between the heads to prevent chemical interaction between supplements.
Automatic dose compensation for doses missing due to power loss.
Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml.
On-demand manual dosing.
3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min.
Motor life expectancy of 10 years – based on 250ml/day/head.
The ReefDose is more than just another programmable dosing pump. Smart software functionality like the “Dynamic Dosing Queue” run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages, maintenance, or feeding.
ReefBeat App
The ReefDose is also part of the Red Sea smart ecosystem, integrating with other ReefBeat devices. With programming through the ReefBeat App, the ReefDose can be programmed for multiple automated dosing setups, or set up for individually customized dosing schedules. Through ReefBeat, you can schedule dosing programs to run every day, or only on selected days, with daily doses ranging from once per day to once per hour.
Automatic rescheduling after changes in dosing schedule or number of doses
Dose Queue presents coordinated list of doses scheduled for all heads
Dose Log keeps a record of supplement volumes per hour for up to 30 days
Peace of Mind - Receive notifications and alerts of missed doses and more
Volume monitor keeps tabs on when reservoirs need to be refilled
Set a dosing head to “Food Head” and use it to dose liquid foods
Download the ReefBeat App:
Specifications
Dimensions: 8.9”L x 4.1” H
Dosing Heads: 4
Dosing Precision: ± 0.05ml (avg. deviation 0.5% over 10 mL)
Dosing Range: 1x/day to 24x/day, 0.2mL to 1000mL per head
Dosing Speed: 15mL/min to 45mL/min
Tubing Connection: 3mm ID, 5mm OD
X1 PRO 2 is a single-channel intelligent dosing pump with WIFI remote function, mainly used to add the various elements needed for marine life growth, such as calcium, magnesium, KH booster, trace elements, etc. to marine life cylinder timing, quantitative and accurate. The automation of X1 PRO 2 can greatly reduce the amount of manual added work, but also avoid manual addition caused by leakage, adding excessive or insufficient errors.Basic Parameters▲ Power Adapter: Input: 100VAC -240VAC; Output: DC12V 1A ▲ Dosing parameters: Dosing channel: 1 KXF-B06 pump head ▲ Flow: >33ml/min ▲ Number of dosing：24 times/day - 1 time/99 days ▲ Dosing accuracy：<±2% ▲ Volume range：0.1ml-9999ml ▲ Interface: Wi-Fi ▲ Working environment: Temperatures: 0 - 70℃ Humidity: 10% - 90% (non-condensation) ▲ Storage environment: Temperature: -20C - 85℃ Humidity: 10% - 90% (non-condensation) ▲ Dimensions (L*W*H): 60 x 95 x 83 mm (including pump head) ▲ Weight: 214g (does not include power adapter)Packing List01 X1 PRO2 WiFI Host ×1 02 Power adapter body ×1(DC12V 1A) 03 Power adapter plug ×1(US/UK/EU/AU) 04 Plastic cylinder ×1(10ml) 05 PVC connection tube(3*5 mm;Transparent 2m) 06 Power extension cable(L-type;75mm) 07 Quick start guide English ×1 08 Hanging screw ×2 (ST2.9*13)
ENSURE PRECISE AND CONSISTENT DOSINGThe Kamoer X1 Liquid Dosing Pump is the latest state of the art controllable liquid dosing pump from Kamoer. Each X1 is integrated with Bluetooth for complete control via mobile device (iPhone or Android). An easy to use app intuitively sets up single or multiple X1 pumps to any desired dosing regimen.X1 SOFTWARE FEATURES:
Add multiple X1 pumps to control
Daisy chain up to Four -X1 pumps per power supply
Flow calibration setting
Operational modes (Manual, Auto Quick Setting)
Easy setting - Set dosing start and stop time (does not have to be 24 hours)
Enter total number of ml to be dosed over the time period
Enter the number of times to dose each time period (up to 12 times)
User can even choose dosing every 1 - 31 days or certain days per week
Adjustable dosing volume Auto Mode: 0.5 - 6500.0ml
Adjustable dosing volume Manual Mode: 0.1 - 6000.0ml
Delay setting between channels prevents chemical interference
*Requires Bluetooth capable mobile device to operateX1 DOSER SPECIFICATIONSDosing Channel: 1Dosing Times: 12 times / day -once / 31 daysFluid Volume: .1ml - 6000mlAccuracy: <+/-2%Pump Life: >2000 hoursX1 pump head tubing size: ID*OD 2*4mm pharmed bpt tubeIncluded PVC tubing size: ID*OD 3*5mm
Inside the package:
X1 dosing pump
Graduated cylinder
Power adapter - Up to 4 - X1 Pumps
PVC Tubing: ID*OD 3*5mm
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Cichlid Lake Saltâ„¢ is a chemically sound blend of salts designed to replicate the natural environment of Rift Lake African Cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide.
Although the major Rift Lakes contain basically the same mineral salts, they do so in greatly differing concentrations. Cichlid Lake Salt™ is formulated so that dosages vary depending on the lake of origin and need only be added when setting up an aquarium or with water changes. Many competing products are little more than combinations of Epsom salt and bicarbonate of soda. This will not provide a complete replication of the mineral salts that are contained in the lakes of Africa, in particular calcium and potassium. Seachem’s Tanganyika Buffer™ (pH 9.0–9.4) and Malawi/Victoria Buffer™ (pH 7.8–8.4) should be used to adjust carbonate hardness and pH.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Zetlight Qmaven II Q6-90 Marine LED Light Unit Recommended spread up to 36" x 24" Quality CREE LEDs Thinnest Body Available Sleek Black Color Integrated Signature Moonlight Improved Color & Light Blending Includes Tank Mounting Kit Fanless Passive Heatsink IP-67 Water Resistance Rating Build in Wifi Superior CREE LEDs Made In The USA! Cree LED lights are by far the most sought-after diodes available today. Instead of using other brands of LEDs that would work, Zetlight QMaven lights only use the best LEDs available, ensuring your light output is efficient and color accurate.
The QMaven houses the LEDs in a custom lens that helps maximize the use of the light emitted into your aquarium. Wide Illumination The QMaven from Zetlight has an extraordinary spread of light that will help reach every corner of your aquarium. The increased width will help remove excessive shadowing making it perfect for SPS and other high-light demanding corals.
Ultra-Slim Efficient Heat Sink Body The design of the QMaven II lets it effectively cool the LEDs without the need of additional cooling fans that are prone to noise and breakage. The finned body lets air pass over the top of the cooling fins creating a flow of air that will keep the LEDs operating at the proper temperature. It is highly recommended to not place the QMaven in a hood, but above an aquarium, in the open air they work great and look even better.
The sealed body also lets the light get an IP67 water-resistant rating, meaning you no longer need to worry about a small splash of water ruining your light. This Zetlight Qmaven Q6-90 170W LED 34.6" Reef Aquarium Light is a 3rd generation Zetlight Qmaven Light. It has a higher wattage and eight different LED colors (only five in the previous version).
This Qmaven Light can be operated using the free Horizon app. The Horizon app allows users to customize the light’s power, daily schedules, and much more. In addition, the Horizon app is compatible with a wide range of other Zetlight skimmers, wavemakers, and dosing pumps.
Features: Model Q6-90 170 Watts Controlled with a smartphone app (Android & iPhone). Controls four channel colors independently and five periods of brightness. You can connect directly to the light's WiFi, and then you can either use your home or the light's WiFi to make future changes. Light dimensions: 84 cm X 26 cm X 3cm High.
Recommended for 90-120cm long reef tanks with hard and soft corals (up to 24 inches (60.96 cm) deep). For soft corals, the tank can be deeper. Mounting brackets included. The mounting brackets can be extended to accommodate tanks up to 120cm. The hanging kit is sold separately.
No fan. Heat sink keeps light cool. IP67 waterproof rating Excellent color blending (so you don't have dots of color in your substrate). Ample actinic spectrum light. The trim of the light has blue LED lights, which stay on when the light turns off, providing a very unique night light effect.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Illuminate your reef with uncompromised power, perfect spectrum, and cutting-edge design using the Zetlight Qmaven II Q6-120 Marine LED. Engineered specifically for advanced marine and reef aquariums up to 150cm (48 to 60 inches) long, this ultra-slim, 220-watt fixture delivers an extraordinary spread of light that eliminates shadowing and fully supports the health, coloration, and rapid growth of SPS, LPS, and soft corals.
Built with premium, USA-made CREE LEDs, the Qmaven II ensures maximum efficiency and perfectly blended, true-to-life color rendering—meaning no distracting "disco ball" dots of color on your sandbed. The fixture boasts a fully fanless, passive heatsink, providing completely silent operation while maintaining an IP67 water-resistance rating to protect against accidental splashes and salt creep.
With built-in WiFi, the Qmaven II puts complete control in the palm of your hand. Using the free Horizon Aqua App (iOS & Android), you can independently adjust four color channels, create dynamic multi-period daily schedules, and simulate natural weather effects like sunrises and storms, all seamlessly integrated into your modern smart-reef ecosystem.
Key Features & Benefits
Premium CREE LEDs: Equipped with the most sought-after diodes available to deliver a refined, full-spectrum output optimized for coral photosynthesis and vivid fluorescence.
Ultra-Slim & Silent Design: The innovative finned body provides passive cooling, completely eliminating the need for noisy, breakable mechanical fans.
Smart App Control: Connect directly via the Horizon Aqua app to program 5 daily brightness periods, control channel colors independently, and synchronize with other Zetlight equipment.
IP67 Water Resistant: The fully sealed body offers supreme protection from water splashes and humidity, ensuring incredible longevity over your saltwater display.
Superior Light Spread: Housed in custom lenses, the extremely wide illumination profile minimizes shading and comfortably reaches every corner of your tank.
Signature Nightlight: Features unique blue LED trim lighting that remains on when the main display turns off, creating a stunning moonlight effect.
Technical Specifications
Model: Q6-120
Power Output: 220 Watts
Fixture Dimensions: 116 cm (L) × 23 cm (W) × 3 cm (H)
Recommended Tank Size: 120-150 cm long reef tanks (Up to 24" deep for hard corals)
Mounting Options: Includes fully adjustable tank mounting brackets (Hanging suspension kit sold separately).
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
LED MARINE
The energy-saving LED Marine lighting medium is striking with its brightness and the special light spectrum, which emulates the light conditions of a coral reef.
Only suitable for MultiLux LED. Not compatible with T5 light units.
• Brilliant white light with 14000 Kelvin
• Particularly well-suited to salt water aquariums
• Promotes coral growth
• Ideally combinable with LED BLUE
LED MARINE 438 mm/12 Watt LED MARINE 590 mm/14 Watt LED MARINE 742 mm/19 Watt LED MARINE 895 mm/23 Watt LED MARINE 1047 mm/29 Watt LED MARINE 1200 mm/31 Watt
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Control your EcoTech Marine equipment* from anywhere with ReefLink and EcoSmart Live. No wires or adapters are needed to connect to your EcoTech equipment. Set up is easy - just plug ReefLink into your power supply within range of your WiFi router, turn it on and you are set. An LED ring on the ReefLink unit lets you know the status of the ReefLink connection.
Control multiple tanks with one ReefLink unit
ReefLink has built-in WiFi to connect with your home router and built-in Radio Frequency to communicate with your EcoTech products
ReefLink can be connected via an Ethernet cable if WiFi is not available
Control your Radion's from your iPhone or Android. Lighting at the click of a button!
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Now you can easily mount your Hydra 32 or 64 LED light with one of the simplest methods available; the Hydra LED Flex Arm. The sleek look of the mounting arm is enhanced by the silicone sleeve over the flexible portion of the mounting arm. The design of the arm mounting bracket lets the arm spin into the perfect position while holding the light securely, right where you want it.
Each Flex Arm comes with clamps to secure the 32 or 64 series of LED lights along with tank mounting brackets that work with aquariums up to 1.2" thick. The mount is designed for rimless tanks, however they can be adapted to rimmed tanks fairly easily.
Specifications:
Usable Length of Arm: 18"
Total Length of Arm: 20"
Max Tank Thickness: 1.0"
What's Included?
1x Hydra Flex Arm
1x Hydra Light Bracket
2x Tank Clamp Assembly
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Aqua Illumination Extremely Versatile Mounting, Spectrum, and Sizing Options...
Aquarium Lighting, Your Way!
Available in 7 different sizes from 12 to 66 inches Balanced white spectrum with highly tunable kelvin range Mounting solutions for every tank need Cluster group LED diodes with 95-degree spread EdgeFieldTM Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest or Mounting Clips included Color Your Way This is far from your typical strip LED!
The Blade maximizes color and efficiency, incorporating exclusive EdgeFieldTM Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide-angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing. When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost! You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Available Color Spectrums: Coral Grow Coral Glow Refugium Freshwater The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs.
It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group: 16x Cool White 4x Warm White 2x Red 2x Blue Mount Your Way The AI Blade is designed for a myriad of mounting solutions to satisfy any system.
Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Control Your Way The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. Compatible with MXM Neptune Systems, EcoTech Marine, and AquaIllumination have joined forces to bring MXM to life.
Now all your favorite EcoTech and AI pumps and lights can be under the wireless control of Apex & Apex Fusion—the user-friendly, yet powerful, interface you already know and love. No more switching between multiple apps.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
AI Blade LED Elevated Tank Mount - Aqua Illumination An attractive and sturdy tank mount for the Blade Smart LED Strip Lights from Aqua Illumination. As an alternative to the Low Profile Tank Rest that's included with AI Blade LED fixtures up to 39", the Elevated Tank Rest increases light spread and allows for easier access into the aquarium. Compatible with both rimmed or rimless tanks.
12 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea SKIMMERS - High performance REEF-SPEC® Skimmers
Designed with hobbyists needs in mind the highly effective flow dynamics of the REEFER™ Skimmer will maintain an optimal ORP (REDOX) level of over 350mv, a level that is normally associated with the application of ozone.
Ratings:
REEFER™ Skimmers are rated according to Red Sea’s REEF-SPEC® criteria that includes a water throughput, water to air ratio and contact time necessary to efficiently strip pollutants from the water. Powered by Sicce PSK pumps, the stated air and water flow rates are actual measurements of these pumps when running on REEFER™ Skimmers.
Reefer 300 Skimmer - Rated for a 600L Mixed Reef System
Reefer 600 Skimmer - Rated for a 1200L Mixed Reef System
Reefer 900 Skimmer - Rated for a 1800L Mixed Reef System
Key Features
Ergonomic diffusion chamber evenly disperses the fine bubbles created by the PSK pump across the skimmer cone, without reducing air or water flow.•
Quiet operation, with vibration absorbing components and a large air intake silencer.
3 assembly options for flexible positioning of the pump inlet and regulation valve according to your sump.
Foam-View window in the collection cup to easily monitor and adjust the foam height.
Built-in manual cup cleaner.
Precision geared valve for positive flow regulation.
Quick release pump holder for easy maintenance.
Drainage port with 1m valved hose
The new Deltec 400i 24v DC protein skimmer is suitable for aquariums from 100 up to 400 liters.
The Deltec 400i comes with some great safety features. Should the water level in the sump suddenly exceed the maximum depth for the skimmer, or the air feed becomes blocked, the new emergency overflow system prevents the collection cup from overflowing. As the water level rises within the protein skimmer the air feed to the pump will shut off automatically via the emergency overflow further reducing the chance of foam flooding the skimmer cup.
The base is a new hollow design where the water flows through to the level adjustment and indicator tubes. This new design feature means that water will exit the protein skimmer body from the lowest point greatly reducing the chance of micro bubbles escaping the body, increasing air- water contact time and also reducing noise and turbulence within the protein skimmer body.Removing the pump for cleaning and maintenance can be achieved in 20 seconds, thus keeping the skimmer running at optimal efficiency is a breeze.With the body of the skimmer being a cylinder and not tapered or conical shape, all the small air bubbles can rise unhindered, fully saturated and will only burst in the foam pot riser, adding to the efficiency and performance of Deltec skimmersProduct Details:
New footplace design allowing water to return through the footplate to aid degassing and reduce turbulence within the body
Highly efficient cylinder shape
New developed emergency overflow with water level indicator
Extremely quiet operation due to new hollow chamber floor
Extremely low power consumption
Quick and easy removal of the pump
Variable adjustable DC pump
Technical Details:
Aquarium Size 100 to 400 litres
Dimensions: 20.5 x 12,5 x 50.5 cm
Pump: Deltec DCC1
Power Consumption: 9 Watts with 350 liters of air (in normal operation)
For sumps with 15 to 25 cm water level
PumpThe Deltec Skimmer 400i is operated with the Deltec DCC1. With only 9 watts about 350 liters of air are generated.Cleaning SystemFor the Deltec Skimmer 400i, there is an optional cleaning head system, whereby the inner standpipe is cleaned by deposits by turning the connection cup. If these deposits are not removed at regular intervals, the skimming performance is drastically reduced over time as foam bubbles burst prematurely at this layer and thus cannot contribute to water purification.Cylindrical ShapeThanks to the ergonomic cylinder shape, the Deltec Skimmer 400i achieves the best skimming results. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated and burst only in the riser of the connection cup. From there, the collected broth can be discharged via a drain hose without having to take the connection cup.
Emergency OverflowThe water level in the skimmer can be read off at the emergency overflow pipe. Furthermore, the marks for the minimum and maximum level help with the perfect adjustment of the water level. Due to the possibility of exchanging the emergency overflow pipe with the regulator pipe, you can decide for yourself how the pipes are arranged.Disassembly, Dimensions & ConstructionRegularly required cleaning of the pump is very easy thanks to the easy and fast disassembly of the skimmer. According to the manufacturer, the pump can be removed from the skimmer in a few seconds. The Deltec Skimmer 600i can be mounted and disassembled without tools. The dimensions of the skimmer are selected so that you can place them comfortably in your filter basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate the skimmer variably in 15 to 25 cm water depth.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Small space save skimmers, perfect for all in one tanks!
Specially designed high-efficient skimmer body
High performance in-sump protein skimmer
Quality Injection molding product
Skimmer Z5Bubble-magus Rock SP1500 pumpAC 120V/60Hz, 18WFootprint: 6.3” x 3.9”Height: 18.9”Aquariums 300-500LWater level 8”
Bubble Magus Z6 Protein Skimmer with DC PumpSkimmer Z6Bubble-magus Rock DSP1000 pumpDC 24V, 13WFootprint: 6.3” x 3.9”Height: 18.9”Aquariums 300-500LWater level 8”
Bubble Magus Z7 Protein SkimmerSkimmer Z7Bubble-magus Rock SP2000 pumpAquariums 500-700LFootprint: 7.9” x 5.1” (200x130mm)Height: 21.3” (540mm)
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates.
11 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Not Just an Auto Top Off System...It's so Much More!
Reliable Auto Top Off System
Built-in Temperature Monitor
Leak Detector Included
ReefBeat App Connected
Not Just for Red Sea Aquariums*
*If you own a Red Sea Reefer Aquarium, check out the ReefATO+ Upgrade Kit instead.
Water Level Sensor
Ultra Reliable. The ReefATO+ sensor features a built-in backup sensor 1" above the primary sensors to automatically shut down the ATO pump in the event of an overfill. With multiple probes built onto the sensor, an indication of actual water level can always be seen on the ReefBeat App.
Temperature Monitoring
The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of ±0.1°. The ReefBeat App allows you to set a narrow “desired” temperature range, and a slightly wider “acceptable” range, that will be seen on-line in the ReefBeat App and in the full temperature logs. If the temperature goes outside the acceptable range, you will get a notification to your smartphone. The detailed logs will show you the minimum, maximum and average temperatures at 15-minute intervals for the past 28 days.
ATO Pump
Quiet, variable flow, 12 vdc ATO pump
Diameter of just 1.8” to fit inside small ATO reservoir openings
Max flow rate 75 gph, Max head 8’, power 6–10W
Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls, or if your RO reservoir runs dry
Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 18 gph. This ensures a splash proof and quiet flow of water into the sump
The noise damping rubber impellor chamber cover and impellor can be removed for pump maintenance
Includes locknut on the outlet hose barb for secure connection to the silicon tubing
Leak Detector
The highly sensitive, Reef-Spec leak detector (with saltwater resistant titanium probes) detects both saltwater and RO/DI water. If a leak is detected, the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device.
Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Smart Controller
Reliably control all the ReefATO+ components and connect them to the ReefBeat ecosystem where you can view the current water level in the pump chamber, see the number of fills and volume of water added to your aquarium over the last 28 days, monitor records of minimum/maximum/average aquarium water temperature over the last 28 days, and modify settings to meet your aquarium's needs. Connection to the ReefBeat App will also allow you to receive notifications if something goes wrong.
Installation Kit
Sensor holder and magnetic corner mounting bracket for 12mm ½” glass
10′ – 1/16″ thick silicone tubing (ID 5mm / 0.2″)
Silent flow – Tube holder (clips on 4 – 12mm / ½” glass)
Siphon Breaker
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Say Goodbye to Manually Testing for Calcium, Alkalinity, or Magnesium in your Reef!
The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with the DOS (available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels.
Automatically performs Calcium, Alkalinity, and Magnesium tests
Includes 1-month of reagent
Combine with Neptune DoS for automated dosing
Programmable alerts for out of range parameters
Data is graphed for easy to comprehend tank stats
Can be set-up and integrated with your Apex in less than 15 minutes
Empties used reagents and sample into an external vessel (not included)
Up to one month of testing before reagents need changing; based on 4-Alk, 2-Ca, 2-Mg tests per day
Note: Requires Neptune Apex or ApexEL with an open 1Link OR a 24V Power and Aquabus cable
How It Works
The Trident is a self-contained automatic titration colorimeter. That’s quite a mouthful, for sure, so let’s state it as simply as we can. The Trident is basically automating what you (and top scientists) do already when you test your water, that is, perform a color changing titration and interpret the results.
On a scheduled basis the Trident carefully mixes its reagents with a small amount of sample water from your aquarium. While doing this, it is measuring (titrating with a precision peristaltic pump) the amounts of each that are necessary to reach an expected color change (determined by the electronic colorimeter). When it finishes the titration, it sends this sample/reagent fluid to your waste container. It then interprets the results of that test and logs the value into your Apex.
Easy Plug & Play Setup
From the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app — it holds your hand through the installation with helpful videos along the way.
Consistency & Precision
The Trident tests with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. This is better than humans can do consistently with every hobby-grade test kit on the market.
Understand Your Reef Tank Like Never Before
When you start getting the regular data coming in from the Trident you will be amazed at the things you can see happening. The daily light cycle swing on calcium carbonate uptake. A salinity drop by watching magnesium. An out of sync dosing of calcium. This increased understanding ultimately helps you maintain a better, more successful reef.
Instant Alerts
You can set up your Apex to alert you, or take immediate action(s) when a parameter falls outside of the safe zone you specify. As just one example, you might be dosing an Alkalinity solution and a misconfiguration could lead to overdosing of your tank. The Trident will catch that, alert you, and give you more time to make that correction before its too late and to save your aquarium. The data from the Trident can also be used to turn on and off other devices (like dosers or solenoids) to protect your tank even more.
Ultimate Stability with the Neptune DŌS
The more stable you maintain proper levels of Alkalinity, Calcium, and Magnesium, the better your corals will grow and thrive. But coral uptake of these supplements often changes and requires us not only to perform more testing but also seems to put us in a never-ending state of adjusting our dosing levels.
The Trident, when paired up with one or more of our DŌS systems solves this problem with Automatic Dosing Control (ADC)
When configured on the Apex, ADC will take the results it receives from the Trident and uses them to gradually turn up or down the amount of additive your DŌS delivers. But, don’t worry, we have built this feature with safety in mind. With ADC you set your target value and your starting dosing amount and ADC will only tune that dosing level +/-35%. If it takes more than that amount of dosing to keep your aquarium at your target value, then the Apex will stop ADC, revert to your starting dosing amount, and alert you that you need to manually adjust your dosing level. Then, ADC can be re-enabled and it will continue to guide your DŌS so that it keeps you as close to your target value as possible.
It is possible to use ADC for all three tests – Alkalinity, Calcium, and Magnesium. You can also use one test value to adjust up or down more than one additive delivered by the DŌS (i.e. Triton system).
Simple Reagent Changes
When using the default testing schedule of four (4) alkalinity, two (2) calcium, and two (2) magnesium tests a day, the reagent stored inside the Apex will last a full month. And adding new reagent is super simple — just slide out the drawer, remove the old bottle(s), and replace them with new ones. If you desire, you can also run a calibration session with the included calibration standard.
The cost of reagents and the recurring cost is a valid concern for a hobbyist considering the test kit or automated system – and we designed the Trident with that in mind – keeping those costs as low as possible. Reagent comes in 2-month kits (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day). These kits include two bottles of Reagent A (changed every month), one each of Reagent B and C (changed every two months), and one bottle of our calibration seawater sample. The reagent kit has at least 240 alkalinity tests and 120 tests each of Calcium and Magnesium. These two-month kits are priced at just $44.95 in the U.S.
Ultra-Quiet Testing
You will hear the Trident operate from time to time if you listen closely or you have a super-quiet room. And, as compared to other automated testing systems, it is several dB quieter. While inside your cabinet along with your other equipment, you will likely never even hear it.
Specifications:
Dimensions: 4.25” x 12” x 10”
Alkalinity Precision: +/-.05 dKh
Calcium Precision: +/-15 ppm
Magnesium Precision: +/-15 ppm
Testing Time: Around 7 minutes per test
Sample Water Required: Around 8mL per test
Max Head: Must be less than 4' from the water sample
What's Included?
1x Trident System
1x 1Link Cable
5' Black Sample Tubing
5' Clear Waste Tubing
