Product information "HI772 Marine Alkalinity (dKH) Checker® HC"
Ideal for
Salt water aquariums
Coral reef tanks
Water quality
Main Benefits
Testing is quick and easy
High precision results - more accurate than chemical test kits
Auto shut-off feature means the Checker cannot be left on by mistake
Fully portable, fitting easily into both palm and pocket
Four steps, one click instant readout
Zero the Checker
Add reagent
Insert sample into Checker
Press button for results
Get accurate results for your saltwater aquarium with our simple handheld colorimeter.
Our alkalinity colorimeter bridges the gap between alkalinity test kits and advanced instrumentation. Standard test kits have limited accuracy since they rely upon the human eye to match colors. Our handheld colorimeter eliminates the hassle of matching to a color chart by providing a direct saltwater alkalinity result in dKH units.
Stock up on reagents! This checker includes a starter kit for 25 tests.
Our handheld colorimeter is portable and fits right in your pocket.
Simple, one-button operation makes getting your alkalinity results easy.
Improve your testing routine and upgrade from your standard test kit
Details
The HI772 Checker®HC (Handheld Colorimeter) provides a simple, accurate, and cost-effective way to measure alkalinity in degrees of carbonate hardness, commonly abbreviated as dKH. Critical to marine environments, alkalinity not only provides the carbonate ion required for calcium carbonate skeletal regeneration of coral reefs, but it also acts as a pH buffer against large changes in acidity. Designed as a more accurate alternative to chemical test kits, the HI772 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Easier to use and more accurate than chemical test kits
Dedicated to a single parameter
Small size, big convenience
Ideal for: Aquaculture & Aquariums, Water Quality
Specifications
Range
0.0 to 20.0 dKH
Resolution
0.1 dKH
Accuracy @ 25°C/77°F
±0.3 dKH ±5% of reading
Light Source
LED @ 610 nm
Light Detector
silicon photocell
Method
colorimetric method
Environment
0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type
(1) 1.5V AAA
Auto-off
after ten minutes of non-use
Dimensions
86.0 mm x 61.0 mm x 37.5 mm (3.4" x 2.4" x 1.5")
Weight
64 g (2.25 oz.)
Ordering Information
HI772 Checker® is supplied with (2) sample cuvettes with caps, alkalinity reagent starter kit for 25 tests (1 bottle of alkalinity reagent), (1) 1 ml syringe and tip, battery, instructions, and quick start guide.
Warranty
1 year limited warranty
Product information "HI758 Marine Calcium Checker® HC"
Always get accurate results for your saltwater aquarium with our handheld colorimeter.
Our saltwater calcium colorimeter fills the gap between calcium test kits and advanced instrumentation. Standard test kits have limited accuracy as they depend on the human eye to determine colors. Our handheld colorimeter eliminates the trouble of matching to a color chart by providing a direct saltwater calcium result in ppm CaCO3.
Our portable handheld colorimeter goes where you go.
Achieve your calcium results easily with simple, one-button design.
Quickly get your results without any hassle.
Details
The HI758U Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure calcium. Required for the development of calcium carbonate skeletons of coral reefs, calcium is a crucial component of marine waters. Designed as a more accurate alternative to chemical test kits, the HI758U provides quick, accurate results in a few easy steps.
Features at-a-glance:
Easier to use and more accurate than chemical test kits
Dedicated to a single parameter
Small size, big convenience
Ideal for: Aquaculture, Water Quality, Environmental, Education
The HI758U Marine Calcium Checker HC® uses a 100 to 1 dilution for analysis and thus requires deionized or distilled water absent of calcium to function correctly. Calcium can be found in many freshwater sources and this any amount present in the water used at the C1 phase can cause false high readings. In addition, many hobby grade reverse osmosis deionized water systems may not adequately remove calcium. This can vary based on the types of filters used, their effectiveness and frequency of replacement. We recommend using deionized water with low conductivity or pure vapor distilled water commonly found in most pharmacies.
Never use tap water to clean your cuvettes. This is especially important for the HI758U Marine Calcium Checker as calcium is commonly present in tap water and residual amounts present in the cuvette will elevate results produced by the Checker. Our HI98703-50 Cuvette Cleaning Solution ensures the glass cuvette used for colorimetric measurements remains clean and free from imperfections.
Calcium Checker Troubleshooting Tips
Never rinse your cuvettes with tap water or saltwater
Use pure vapor distilled water from your local pharmacy at C1 phase. RODI water from home filtration units may not be suitable for this test as calcium can easily permeate through your filter membranes.
Clean your cuvettes with distilled or deionized water absent of Calcium that is going to be used for C1 phase dilution.
Measure out 9 ml of distilled or deionized water for C1 phase
Make sure no excess aquarium sample saltwater is on the tip of the pipette. Only administer the saltwater that is sucked into the pipette tip.
Specifications
Range
200 to 600 ppm
Resolution
1 ppm
Accuracy @ 25°C/77°F
±6% of reading
Light Source
LED @ 610 nm
Light Detector
silicon photocell
Method
adaptation of the Zincon method
Environment
0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type
(1) 1.5V AAA
Auto-off
after ten minutes of non-use
Dimensions
81.5mm x 61mm x 37.5mm (3.2" x 2.4" x 1.5”)
Weight
64 g (2.25 oz.)
Ordering Information
HI758 Calcium Checker is supplied with (2) sample cuvettes with caps, calcium reagent starter kit for 25 tests, dropper,1 ml syringe with tip, 100 microliter pipette with tip, plastic pipette, battery, instructions and quick start guide.
Warranty
1 year limited warranty
Product information "HI781 Marine Nitrate (LR) Handheld Checker (25 tests)"
Nitrate is a by-product of the Nitrogen cycle. Excessive amounts of Nitrates in a reef aquarium can promote the growth of undesirable organisms including algae and dinoflagellates while insufficient amounts can lead to starvation in which SPS and other corals will show signs including the loss of color and paleness.The HI781 Nitrate Checker HC is a handheld colorimeter that uses the Beer-Lambert principle to determine the concentration of nitrate colorimetrically. The HI781 is designed specifically to measure low levels of nitrate in a saltwater aquarium. The 0.00 to 5.00 range is ideal for reef aquarium maintenance.
Ideal for aquariums and marine biology
Easier to use and more accurate than chemical test kits
Small size, big convenience
SPECIFICATIONS
HI781
Range
0.00 to 5.00 ppm (mg/L) NO?-
Resolution
0.01 ppm
Accuracy @ 25°C/77°F
±0.25 ppm ±2% of reading
Light Source
LED @ 525 nm
Light Detector
silicon photocell
Method
zinc reduction method
Auto-off
after ten minutes of non-use
Environment
0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type
(1) 1.5V AAA
Ordering Information
HI781 Checker HC is supplied with sample cuvettes with caps (2), nitrate reagent starter kit (reagents for 25 tests), filter holder, 10 mL syringe, 5 mL syringe with tip, mixing vial with cap, battery, and instructions.
Accessories
HI781-25 Reagent set for 25 tests
HI781-11 Calibration set
9 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
NeoPlex is a broad spectrum antibiotic effective against most external infections of both marine and freshwater fish. Used as directed, NeoPlex will not discolor the water or damage the filter bed. It is well tolerated by invertebrates, although delicate species may be stressed.
Active ingredients: neomycin sulfate (43%) Inactive ingredients: excipients (57%)
Indications
NeoPlex is appropriate for treating a variety of external infections of both marine and freshwater fish. Below are some of the more common diseases treatable with NeoPlex. Be aware that many diseases and infections share similar physical and behavioral symptoms, e.g. clamped fins, lesions, loss of appetite.
The new Deltec 400i 24v DC protein skimmer is suitable for aquariums from 100 up to 400 liters.
The Deltec 400i comes with some great safety features. Should the water level in the sump suddenly exceed the maximum depth for the skimmer, or the air feed becomes blocked, the new emergency overflow system prevents the collection cup from overflowing. As the water level rises within the protein skimmer the air feed to the pump will shut off automatically via the emergency overflow further reducing the chance of foam flooding the skimmer cup.
The base is a new hollow design where the water flows through to the level adjustment and indicator tubes. This new design feature means that water will exit the protein skimmer body from the lowest point greatly reducing the chance of micro bubbles escaping the body, increasing air- water contact time and also reducing noise and turbulence within the protein skimmer body.Removing the pump for cleaning and maintenance can be achieved in 20 seconds, thus keeping the skimmer running at optimal efficiency is a breeze.With the body of the skimmer being a cylinder and not tapered or conical shape, all the small air bubbles can rise unhindered, fully saturated and will only burst in the foam pot riser, adding to the efficiency and performance of Deltec skimmersProduct Details:
New footplace design allowing water to return through the footplate to aid degassing and reduce turbulence within the body
Highly efficient cylinder shape
New developed emergency overflow with water level indicator
Extremely quiet operation due to new hollow chamber floor
Extremely low power consumption
Quick and easy removal of the pump
Variable adjustable DC pump
Technical Details:
Aquarium Size 100 to 400 litres
Dimensions: 20.5 x 12,5 x 50.5 cm
Pump: Deltec DCC1
Power Consumption: 9 Watts with 350 liters of air (in normal operation)
For sumps with 15 to 25 cm water level
PumpThe Deltec Skimmer 400i is operated with the Deltec DCC1. With only 9 watts about 350 liters of air are generated.Cleaning SystemFor the Deltec Skimmer 400i, there is an optional cleaning head system, whereby the inner standpipe is cleaned by deposits by turning the connection cup. If these deposits are not removed at regular intervals, the skimming performance is drastically reduced over time as foam bubbles burst prematurely at this layer and thus cannot contribute to water purification.Cylindrical ShapeThanks to the ergonomic cylinder shape, the Deltec Skimmer 400i achieves the best skimming results. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated and burst only in the riser of the connection cup. From there, the collected broth can be discharged via a drain hose without having to take the connection cup.
Emergency OverflowThe water level in the skimmer can be read off at the emergency overflow pipe. Furthermore, the marks for the minimum and maximum level help with the perfect adjustment of the water level. Due to the possibility of exchanging the emergency overflow pipe with the regulator pipe, you can decide for yourself how the pipes are arranged.Disassembly, Dimensions & ConstructionRegularly required cleaning of the pump is very easy thanks to the easy and fast disassembly of the skimmer. According to the manufacturer, the pump can be removed from the skimmer in a few seconds. The Deltec Skimmer 600i can be mounted and disassembled without tools. The dimensions of the skimmer are selected so that you can place them comfortably in your filter basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate the skimmer variably in 15 to 25 cm water depth.
Replacement Kamoer Dosing Pump System input and output connectors are made to perfectly fit the Kamoer Dosing Pump Tubing. Replacement Tube Connectors let you replace your current ones, or if you need to splice your dosing tubes together you can do that too. What's Included? 1x Kamoer Dosing Tube Connector
ENSURE PRECISE AND CONSISTENT DOSINGThe Kamoer X1 Liquid Dosing Pump is the latest state of the art controllable liquid dosing pump from Kamoer. Each X1 is integrated with Bluetooth for complete control via mobile device (iPhone or Android). An easy to use app intuitively sets up single or multiple X1 pumps to any desired dosing regimen.X1 SOFTWARE FEATURES:
Add multiple X1 pumps to control
Daisy chain up to Four -X1 pumps per power supply
Flow calibration setting
Operational modes (Manual, Auto Quick Setting)
Easy setting - Set dosing start and stop time (does not have to be 24 hours)
Enter total number of ml to be dosed over the time period
Enter the number of times to dose each time period (up to 12 times)
User can even choose dosing every 1 - 31 days or certain days per week
Adjustable dosing volume Auto Mode: 0.5 - 6500.0ml
Adjustable dosing volume Manual Mode: 0.1 - 6000.0ml
Delay setting between channels prevents chemical interference
*Requires Bluetooth capable mobile device to operateX1 DOSER SPECIFICATIONSDosing Channel: 1Dosing Times: 12 times / day -once / 31 daysFluid Volume: .1ml - 6000mlAccuracy: <+/-2%Pump Life: >2000 hoursX1 pump head tubing size: ID*OD 2*4mm pharmed bpt tubeIncluded PVC tubing size: ID*OD 3*5mm
Inside the package:
X1 dosing pump
Graduated cylinder
Power adapter - Up to 4 - X1 Pumps
PVC Tubing: ID*OD 3*5mm
A Complete Eco-System in a Bottle
For SALT & FRESH WATER
Features and other benefits:
Dramatically reduces need for water changes
Reduces the frequency of cleaning
Good for salt and freshwater fish
Chemical free!
A new tank starter for biological cycling and boosting
An organic waste degrader
Naturally stimulates plant growth
Lowers ammonia levels and biologically reduces nitrates
Removes odors and clears cloudy water
Biological maintainer for established tanks
Enhances ability of plants to utilize light, water and nutrients
Breaks down residue on gravel, plants ,rocks, etc.
Breaks down protein foam
These bacteria are compatible with biological filters and UV lights. The UV lights should be turned off for 48-72 hours after the introduction of this product. This will allow the bacteria to progress through their most active growth stage.
MICROBE-LIFT/Special Blend can not neutralize chlorine, chloramine or heavy metals.
MICROBE-LIFT/Special Blend works well with activated carbon and is compatible with copper based products.
Since each bottle of MICROBE-LIFT is grown individually, color variations may exist from bottle to bottle. These variations in color are not indicative of variations in product quality. Any floating particles present are suspended biofilm which slough off the sides of the bottle. Dimpling or expansion of the container is caused by pressure differences resulting from temperature variations due to the fact that the bottle is sealed.
*Saltwater environments - the bacteria in this product will remain effective when used in marine environments with a specific gravity of 1.017 to 1.025. In marine tanks, add the aquarium salt mix and allow the water to circulate for 24 hours, then check and adjust the density. Add the bacteria after the new water has circulated for the 24-hour period.
Saltwater oceans are a highly stable environment with very little fluctuation in pH. The ocean waters dilute fish waste and organic matter. The bacteria in MICROBE-LIFT/Special Blend provides the assistance needed to break down the decaying organic matter and cycle certain elements, e.g. nitrogen and sulfur, etc. which may build up in your tank.
This product is NOT a chemical. It is harmless to humans, animals, fish and plants. Since we cannot control the pre-existing dynamics of individual aquaria, the above information and instructions are subject to many variables. Many situations may be unique in nature.
MICROBE-LIFT/Special Blend has a hydrogen sulfide odor which will dissipate quickly.
*
Refractometer for measuring salinity of seawater for reef aquariums
*
Calibrated to measure absolute salinity of seawater, not brine (NaCl)
*
High resolution display focuses on the range relevant for reef aquariums
Maintain proper salinity level with greater precision and convenience. Red Sea Seawater Refractometer is designed specifically to measure the absolute salinity of seawater, not brine (NaCl) for true readings essential for reef aquariums housing sensitive corals. High-resolution dual scale display (salinity in ppt and specific gravity) focuses on the range relevant for reef aquariums, eliminating confusing extraneous graduations. Dual scale range of 20-40 PPT/77°F and 1.010-1.030 S.G.
Red Sea Seawater Refractometer has been calibrated for the specific ionic content of seawater according to the most advanced international laboratory standards for practical salinity measurements. High accuracy seawater refractometer features Automatic Temperature Compensation for exceptional accuracy measuring the absolute salinity of seawater at a temperature of 25°C/77°F.
Main Features
Directly reads the absolute salinity of seawater at 25°C/77°F (no need for seawater or temperature compensation factors).
Specifically designed for the ionic content of seawater (NSW) for more accurate salinity measurement (industry standard refractometers are calibrated for salt brine).
Calibrated for seawater (NSW) at 25°C/77°F, the normal temperature range for reef aquariums (most standard refractometers are calibrated at 15°C/59°F).
Easier to read, higher resolution display, focused to the relevant range for reef aquariums of up to 40ppt.
Includes Integrated Automatic Temperature Compensation (ATC) for accurate measurement at standard ambient temperature.
Did You Know?Measuring the salinity of seawater with a refractometer calibrated for brine (NaCl) solution will result in a deviation of up to 1.5 ppt!
Directions for use
Clean the glass prism and translucent flap of the refractometer with deionized (DI) water at 22-25°C and dry thoroughly with a soft cloth.
Hold the refractometer horizontally and open the flap.
Using the pipette provided, place a small sample of the seawater to be tested on the glass prism. Do not immerse the refractometer into the seawater.
Close the flap on the sample and wait for 15 seconds to allow for the temperature of the sample and the refractometer to equalize.
Point the prism end of the refractometer to a light source and look through the eyepiece. (Note: The refractive index is also dependent on the wavelength of the light source and therefore a light source close to daylight should be used.)
The top of the screen will be blue and the bottom will be clear/white. The dividing line between the blue and white sections is where the reading should be taken.
Adjust the focus for your individual eyesight by rotating the eyepiece until a sharp picture is achieved.
Read the seawater salinity in ppt and/or the equivalent specific gravity (S.G.) at 25°C.
Clean the glass prism and translucent flap of the refractometer with DI water and dry thoroughly with a soft cloth.
CalibrationAlignment should always be carried out with the instrument at 22-25°C. Allow the refractometer to stand at this temperature for 30 minutes before alignment.
Remove the cover from the alignment screw.
Place a sample of DI water on the glass prism and check the salinity reading as directed above.
If the reading is not exactly on the zero ppt mark on the scale, adjust the position of the reading by rotating the alignment screw with the screwdriver provided until the reading is zero ppt.
Replace the cover from the alignment screw.
StorageTo prevent the formation of condensation inside the refractometer, store in a dry environment.
General InformationRefractometers are optical instruments that measure the refractive index of a solution, which will vary according to its ionic composition, concentration and temperature. For accurate results, refractometers must be calibrated for the specific solution to be tested and in the correct temperature range.
Red Sea's Seawater Refractometer has been calibrated for the specific ionic content of seawater according to the most advanced international laboratory standards for practical salinity measurements. Measuring the salinity of seawater with a refractometer calibrated for brine (NaCl) solution will result in a deviation of up to 1.5 ppt.
Red Sea's Seawater Refractometer includes automatic temperature compensation. However, to avoid compensation errors, it has been calibrated at 25°C, the normal temperature range for reef aquariums. Both the ambient temperature and the water sample temperature will influence the refractive index and therefore it is recommended to use the refractometer in environments where the ambient temperature and the water to be tested are between 15-35°C.
Over time, the optical elements inside refractometers can become misaligned. Therefore, before first use and thereafter on a regular basis, the alignment of a refractometer should be checked and adjusted as necessary.
Red Sea's Refractometer DisplayThe PPT scale on Red Sea's Seawater refractometer is calculated using an algorithm for seawater and therefore will give a reading of the Absolute Salinity of seawater.
The PPT scale on regular salinity refractometers are calculated using an algorithm for Brine. Using a Brine refractometer for Seawater will give an error of approximately 1.5ppt in the salinity reading.
About SalinitySalinity is a general term describing the concentration of salt in water. However, solutions of different type of salts have different refractive indexes. Brine is a solution of Sodium Chloride (table salt) that contains 2 chemical elements. Seawater contains approximately 70 chemical elements that include Calcium, Magnesium, Potassium etc. in addition to the Sodium Chloride. Seawater and Brine of the same salinity (i.e. the same weight of salt/liter) have different refractive indexes and will give different salinity readings if measured on the same refractometer.
Refraction & Refractive IndexAll transparent materials such as liquids refract (distort) light. All transparent materials refract light differently and have what is called a "refractive index" which means how much a particular material distorts light. Different concentrations of the same liquid have different refractive indexes. The scale of a refractometer is calculated by using a mathematical algorithm that relates the measured refraction to its concentration for a specific liquid.
Refractive Index and TemperatureThe refractive index of liquids change with temperature and therefore has a major effect on measuring salinity with a refractometer. The algorithm for defining the PPT (and S.G.) scale for a refractometer is calculated for a specific temperature.
PPT readings from refractometers that are not calibrated for reef aquariums (i.e. 25°C) need to be adjusted according to a conversion table to give the actual PPT at the aquarium temperature. This is often a cause for misinterpretation of refractometer readings.
For example, using a seawater refractometer calibrated at 20°C will give a PPT reading that is approximately 1-1.5ppt lower than the absolute salinity of the same water sample at the normal aquarium temperature of 25°C.
Therefore, Red Sea's Seawater Refractometer calibrated at 25°C/77°F directly reads the absolute salinity of seawater with no need for temperature compensation factor)
ATC - Automatic Temperature CompensationTemperature is probably the biggest cause of wrong readings with a refractometer. Calibration and testing of water samples should be done after the refractometer and water sample have equalized at the correct temperature.
Automatic Temperature Compensation (ATC) compensates for a few degrees of difference between the ambient temperature and the calibrated temperature of the refractometer. Larger temperature variations will give an error of approximately 1.0ppt in the salinity reading.
NOTE: ATC does not adjust the PPT reading of a refractometer to the temperature of the aquarium.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Now you can easily mount your Hydra 32 or 64 LED light with one of the simplest methods available; the Hydra LED Flex Arm. The sleek look of the mounting arm is enhanced by the silicone sleeve over the flexible portion of the mounting arm. The design of the arm mounting bracket lets the arm spin into the perfect position while holding the light securely, right where you want it.
Each Flex Arm comes with clamps to secure the 32 or 64 series of LED lights along with tank mounting brackets that work with aquariums up to 1.2" thick. The mount is designed for rimless tanks, however they can be adapted to rimmed tanks fairly easily.
Specifications:
Usable Length of Arm: 18"
Total Length of Arm: 20"
Max Tank Thickness: 1.0"
What's Included?
1x Hydra Flex Arm
1x Hydra Light Bracket
2x Tank Clamp Assembly
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Control your EcoTech Marine equipment* from anywhere with ReefLink and EcoSmart Live. No wires or adapters are needed to connect to your EcoTech equipment. Set up is easy - just plug ReefLink into your power supply within range of your WiFi router, turn it on and you are set. An LED ring on the ReefLink unit lets you know the status of the ReefLink connection.
Control multiple tanks with one ReefLink unit
ReefLink has built-in WiFi to connect with your home router and built-in Radio Frequency to communicate with your EcoTech products
ReefLink can be connected via an Ethernet cable if WiFi is not available
Control your Radion's from your iPhone or Android. Lighting at the click of a button!
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Feature
Bubble Magus BP-100 BIO-PELLETS Media Filter is suitable for most filter media including zeolite, bio pellets, activated carbon or filter rock.
For medium to Big Tank Use
Suitable for Rowaphos or Biopellets
Specification
Power 220V-240V 50Hz 11W Power
Rock WP600 Pump
Size 146 x 179 x 450mm
1.5Litres Volume for Bio-Pellets
Weight: 2.9 kg
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Bubble Magus QQ2 is a compact internal protein skimmer with a minimum 4" water level requirement. Plastic injected molded body with built in air silencer and bubble stopper. Powered by an energy efficient sp600 needle wheel pump Great for traveling frag tank, quarantine tank, or holding tank.MODEL : BM-QQ2
Pump : ROCK SP600
Power : 220V/110V ,8.5W
Size :100×75×305MM
Capacity :100L (26 Gallons)
8.5w energy efficient needle wheel pump
4" working water level
Built in bubble stopper and air silencer
Rugged injected plastic molded body
Drop in design for frag or AIO tank
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Illuminate your reef with uncompromised power, perfect spectrum, and cutting-edge design using the Zetlight Qmaven II Q6-120 Marine LED. Engineered specifically for advanced marine and reef aquariums up to 150cm (48 to 60 inches) long, this ultra-slim, 220-watt fixture delivers an extraordinary spread of light that eliminates shadowing and fully supports the health, coloration, and rapid growth of SPS, LPS, and soft corals.
Built with premium, USA-made CREE LEDs, the Qmaven II ensures maximum efficiency and perfectly blended, true-to-life color rendering—meaning no distracting "disco ball" dots of color on your sandbed. The fixture boasts a fully fanless, passive heatsink, providing completely silent operation while maintaining an IP67 water-resistance rating to protect against accidental splashes and salt creep.
With built-in WiFi, the Qmaven II puts complete control in the palm of your hand. Using the free Horizon Aqua App (iOS & Android), you can independently adjust four color channels, create dynamic multi-period daily schedules, and simulate natural weather effects like sunrises and storms, all seamlessly integrated into your modern smart-reef ecosystem.
Key Features & Benefits
Premium CREE LEDs: Equipped with the most sought-after diodes available to deliver a refined, full-spectrum output optimized for coral photosynthesis and vivid fluorescence.
Ultra-Slim & Silent Design: The innovative finned body provides passive cooling, completely eliminating the need for noisy, breakable mechanical fans.
Smart App Control: Connect directly via the Horizon Aqua app to program 5 daily brightness periods, control channel colors independently, and synchronize with other Zetlight equipment.
IP67 Water Resistant: The fully sealed body offers supreme protection from water splashes and humidity, ensuring incredible longevity over your saltwater display.
Superior Light Spread: Housed in custom lenses, the extremely wide illumination profile minimizes shading and comfortably reaches every corner of your tank.
Signature Nightlight: Features unique blue LED trim lighting that remains on when the main display turns off, creating a stunning moonlight effect.
Technical Specifications
Model: Q6-120
Power Output: 220 Watts
Fixture Dimensions: 116 cm (L) × 23 cm (W) × 3 cm (H)
Recommended Tank Size: 120-150 cm long reef tanks (Up to 24" deep for hard corals)
Mounting Options: Includes fully adjustable tank mounting brackets (Hanging suspension kit sold separately).
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Zetlight Qmaven II Q6-90 Marine LED Light Unit Recommended spread up to 36" x 24" Quality CREE LEDs Thinnest Body Available Sleek Black Color Integrated Signature Moonlight Improved Color & Light Blending Includes Tank Mounting Kit Fanless Passive Heatsink IP-67 Water Resistance Rating Build in Wifi Superior CREE LEDs Made In The USA! Cree LED lights are by far the most sought-after diodes available today. Instead of using other brands of LEDs that would work, Zetlight QMaven lights only use the best LEDs available, ensuring your light output is efficient and color accurate.
The QMaven houses the LEDs in a custom lens that helps maximize the use of the light emitted into your aquarium. Wide Illumination The QMaven from Zetlight has an extraordinary spread of light that will help reach every corner of your aquarium. The increased width will help remove excessive shadowing making it perfect for SPS and other high-light demanding corals.
Ultra-Slim Efficient Heat Sink Body The design of the QMaven II lets it effectively cool the LEDs without the need of additional cooling fans that are prone to noise and breakage. The finned body lets air pass over the top of the cooling fins creating a flow of air that will keep the LEDs operating at the proper temperature. It is highly recommended to not place the QMaven in a hood, but above an aquarium, in the open air they work great and look even better.
The sealed body also lets the light get an IP67 water-resistant rating, meaning you no longer need to worry about a small splash of water ruining your light. This Zetlight Qmaven Q6-90 170W LED 34.6" Reef Aquarium Light is a 3rd generation Zetlight Qmaven Light. It has a higher wattage and eight different LED colors (only five in the previous version).
This Qmaven Light can be operated using the free Horizon app. The Horizon app allows users to customize the light’s power, daily schedules, and much more. In addition, the Horizon app is compatible with a wide range of other Zetlight skimmers, wavemakers, and dosing pumps.
Features: Model Q6-90 170 Watts Controlled with a smartphone app (Android & iPhone). Controls four channel colors independently and five periods of brightness. You can connect directly to the light's WiFi, and then you can either use your home or the light's WiFi to make future changes. Light dimensions: 84 cm X 26 cm X 3cm High.
Recommended for 90-120cm long reef tanks with hard and soft corals (up to 24 inches (60.96 cm) deep). For soft corals, the tank can be deeper. Mounting brackets included. The mounting brackets can be extended to accommodate tanks up to 120cm. The hanging kit is sold separately.
No fan. Heat sink keeps light cool. IP67 waterproof rating Excellent color blending (so you don't have dots of color in your substrate). Ample actinic spectrum light. The trim of the light has blue LED lights, which stay on when the light turns off, providing a very unique night light effect.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
LED MARINE
The energy-saving LED Marine lighting medium is striking with its brightness and the special light spectrum, which emulates the light conditions of a coral reef.
Only suitable for MultiLux LED. Not compatible with T5 light units.
• Brilliant white light with 14000 Kelvin
• Particularly well-suited to salt water aquariums
• Promotes coral growth
• Ideally combinable with LED BLUE
LED MARINE 438 mm/12 Watt LED MARINE 590 mm/14 Watt LED MARINE 742 mm/19 Watt LED MARINE 895 mm/23 Watt LED MARINE 1047 mm/29 Watt LED MARINE 1200 mm/31 Watt
12 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea SKIMMERS - High performance REEF-SPEC® Skimmers
Designed with hobbyists needs in mind the highly effective flow dynamics of the REEFER™ Skimmer will maintain an optimal ORP (REDOX) level of over 350mv, a level that is normally associated with the application of ozone.
Ratings:
REEFER™ Skimmers are rated according to Red Sea’s REEF-SPEC® criteria that includes a water throughput, water to air ratio and contact time necessary to efficiently strip pollutants from the water. Powered by Sicce PSK pumps, the stated air and water flow rates are actual measurements of these pumps when running on REEFER™ Skimmers.
Reefer 300 Skimmer - Rated for a 600L Mixed Reef System
Reefer 600 Skimmer - Rated for a 1200L Mixed Reef System
Reefer 900 Skimmer - Rated for a 1800L Mixed Reef System
Key Features
Ergonomic diffusion chamber evenly disperses the fine bubbles created by the PSK pump across the skimmer cone, without reducing air or water flow.•
Quiet operation, with vibration absorbing components and a large air intake silencer.
3 assembly options for flexible positioning of the pump inlet and regulation valve according to your sump.
Foam-View window in the collection cup to easily monitor and adjust the foam height.
Built-in manual cup cleaner.
Precision geared valve for positive flow regulation.
Quick release pump holder for easy maintenance.
Drainage port with 1m valved hose
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Customizable DIY Aquarium Net Cover
Keep your finny friends safe inside your tank with a customizable Red Sea Aquarium Net Cover.
With a sleek profile and minimalist hangers the Red Sea Net Cover blends in seamlessly even on ultra-clear, rimless, open-top aquariums.
The extra strong aluminum frame and purpose designed components allow the extra thin transparent net cover to be customized to accommodate rim-mounted equipment such as lighting arms, auto-feeders and overflow boxes.
Check out our how-to video that shows exactly how to assemble Red Sea’s fish saver, step-by-step. Keep in mind that this is a Do-it-Yourself cover, and while it offers versatility and customizability at a fraction of the cost of custom-built covers, it does require proper DIY skills including planning, taking exact measurements and cutting aluminum profiles. So if you aren’t a DIY project kind of hobbyist, you can always ask your local dealer or a handy friend to help.
Designed specifically for rimless tanks the Red Sea cover also works well with braced tanks such as the MAX® S-series.
Main Features:
Suitable for most open-top aquariums
Extra strong, customized aluminum profiles
8mm (5/16″) thin strand, transparent netting
Inside-rim or on-rim mounting options
Includes components for one customized cut-out for filters
Components available to accommodate additional rim-mounted equipment
Includes spline roller
Contents of DIY Aquarium Net Cover Kit:
Aluminum frame sections/profiles
Internal and external frame corners
Spacers and hangers
8mm (5/16″) netting, which can be cut to size
Spline rubber for attaching the net to the frame
Spline roller for inserting the spline
Example of Red Sea REEFER™ 350 Deluxe with cutouts for overflow and LED lights
FOUNDATION ABC+ Foundation and trace element supplement for balanced formation of coral skeletonSKELETAL ELEMENTS is a blend of all of the corals foundation elements of coral skeletons: Calcium, magnesium, strontium & carbonate, with the addition of potassium, bromine and iodine in the unique ratio required by corals.
All of these elements need to be available in balanced proportions for positive coral health and growth.
Red Sea’s SKELETAL ELEMENTS is a uniquely formulated powder supplement containing all of the elements of Foundation A, B & C, plus Red Sea’s Coral Colors A & B (potassium, boron, iodine & bromine) formulated in the exact ratio as found in the coral skeleton.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
TRACE COLORS B
Potassium and Boron supplement that promotes the Red colors in corals
POTASSIUM+ Supplement is part of the complete range of complementary major, minor and trace element complexes which together provide the needs of corals.
POTASSIUM+ Supplement contains potassium and boron that are associated with many biological processes, one of them being the production of the red pigments in the soft tissue of corals.
Potassium plays an essential role in the transportation of coral nutrients within the soft tissue (including the nutrients provided by the zooxanthellae). Potassium and boron significantly affect the alkalinity of a coral’s soft tissue and the formation of aragonite in its skeleton. Potassium is related to the red chromo-proteins.
For best results in displaying coral colors use Red Sea’s NO3: PO4– X.
Liquid supplement:
1ml will raise the potassium level of 100 liters (25 gal) by1.75ppm.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s user-friendly Magnesium titration test provides a quick and reliable measurement of Magnesium in your aquarium to an accuracy of either 50ppm or 100ppm according to your needs.
Kit includes easy to follow graphic instructions and conversion tables for immediate interpretation of results.
Red Sea Magnesiun Test Kit Includes 75 tests.
Red Sea Ammonia Marine Test Marine Kit is an advanced colorimetric test measuring the total ammonia (NH3/NH4) in marine aquariums to an accuracy of 0.2 ppm.
Red Sea Ammonia Marine Test Kit simple to use test kit is essential during the initial stage of the biological maturation of all marine and reef aquariums.
Red Sea Ammonia MarineTest Kit Includes 100 tests.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
SeaGel is a blend of MatrixCarbon and PhosGuard and is is optimized specifically for aquaria where organic color body and acid removal is required without the introduction of phosphate. MatrixCarbon is an ultracapacity carbon for the removal of organic and color impurities. PhosGuard is a powerful remover of phosphate, silicate, toxic metals, and acids. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for reef and marine use. SeaGel may also be used in freshwater that is not phosphate buffered.
SeaGel is optimized specifically for aquaria where organic color body and acid removal is required without the introduction of phosphate.
Although MatrixCarbon has the lowest detectable leachable phosphate content of all major carbon brands tested, some phosphate is still released. Adding PhosGuard to the mix compensates for this. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for reef and marine use.
![Tank Net Screen 36"/90cm [Incl. 1 Univeral cut out]](//www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_759f3237-26f1-4a09-8fca-9e38f9d830cd.png?v=1591118136&width=645)
![Tank Net Screen 36"/90cm [Incl. 1 Univeral cut out]](http://www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_759f3237-26f1-4a09-8fca-9e38f9d830cd.png?v=1591118136&width=645)
