2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Single stage regulator with adjustable pressure will reduce the high pressure of a CO2 cylinder to a lower and usable pressure for use in the aquarium. The ability to adjust the working/output pressure ensures the regulator will be able to meet the needs of any aquarium requirements; whether that is operating a single CO2 diffuser, or multiple diffusers, this regulator can be adjusted to deliver the pressure that's needed.A high-precision needle valve is fitted as standard, which gives you easy and incredibly accurate control of CO2 dosing. As a result, the regulator is suitable for small/nano aquariums as the bubble rate (dose) can be reduced as low as 1 bubble / 10 seconds.Because the needle valve can rotate, the regulator can be used with either horizontal or vertical cylinder valves. The stem/nut can also be removed and can then connect to nano cartridges, making the regulator suitable for nano aquariums, and much larger aquariums.The integrated solenoid valve provides the ability to automatically shut off the CO2 at timed intervals, e.g. to sync with the aquarium lighting. This ensure CO2 is not being dosed when it's not needed, and will therefore extend the lifespan of your CO2 cylinder and save money. The 12v DC solenoid (mains transformer included) provides safe, low temperature, and guaranteed no noise operation.Dual pressure gauges indicate the cylinder pressure and the output / working pressure.
Instructions
Tighten the regulator to your CO2 cylinder using a spanner or wrench. Do not use your hands to tighten, it will not create sufficient seal and be likely to leak.
Set the output pressure to minimum by turning the pressure adjuster knob fully anticlockwise.
Close the needle valve by turning fully clockwise.
Plug the solenoid into a mains socket and switch on.
Open the flow of gas from your CO2 cylinder.
The cylinder pressure gauge will now indicate the pressure of the cylinder. Turn the pressure adjuster clockwise until it reads 40PSI, which is a good starting point for a single diffuser installation.
With the bubble counter attached, turn the needle valve anticlockwise to achieve the bubble rate desired. 1 bubble / second is suitable for a 150L aquarium - adjust your dosing in accordance to this, i.e. 2 bubble / second for 300L aquarium.
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
A simple way to supply CO2 to your planted tank.Replacement CO2 canister to ISTA CO2 Diffuser Set.
Features
Compact and convenient in setting up. Transparent, nice looking and won’t deform
A simply way to efficiently dissolve CO2 into the water.
Extendable in dissolving rate simply by connecting chambers. Suitable for both small and medium size tank.
Perfect chamber length in activating with water current to ensure efficient diffusion.
Set up
Vertically place the Diffuser into the tank to fill up the camber with aquarium water.
Secure diffuser in tank with suction cups
Cover and fasten the air outlet (positioned on the top side of diffuser) with rubber cup
Connect the CO2 inlet (positioned on the by side of diffuser) with CO2 Canister through a airline tubing and gently fill up the chamber of diffuser with CO2.
With ISTA Disposable CO2 Canister, it 550 cc (at 1ATM 25℃).
Strideways Pro CO2 regulator is a professional system that comes equipped with a failsafe mechanism for added safety measures, robust construction, very precise needle valve and includes a bubble counter for simple and precise management of CO2 levels.
Designed for use with standard DIN477 (Top or sideways installation) and sodastream CO2 cylinders it also offers a DC solenoid valve, for a high durability and low heating operation.
Recommended working pressure 0,25 – 0,30 MPa.
3 Year Warranty
Professional CO2 regulator for the accurate dosing of CO2 to the aquarium. Equipped with a 12V solenoid valve and CO2 bubble counter. Complete set, ideal for beginners with quality for professionals.
CO2 adjustment is flawless with this CO2 regulator. The working pressure can be set precisely with the flick of a wrist on the comfortable button. For adjusting the desired number of bubbles, there is a pleasant to operate fine adjustment on the side. The result is immediately visible in the linked CO2 bubble counter. This can be tilted 360 degrees. The bubble counter can therefore be positioned upright at all times.
Close CO2 dosing at night
To be able to close the CO2 dosing at night, this CO2 regulator is equipped with an integrated 12V solenoid valve. This works on USB with included adapter for the wall socket. The power consumption, and in particular the heat output, is low due to the 12V. In addition, this provides extra safety around the aquarium. High-quality materials have been used. This can be felt directly by the weight. The sealing ring is also of ultimate quality and stronger than other rings on the market.
No understanding of CO2 dosing or getting a complicated system at home? No problem. Included is a wrench to tighten the CO2 regulator on the bottle. Always screw the CO2 regulator firmly on the bottle to prevent leaks. Furthermore, the installation is very simple and the system can be started up in a few steps. Always check the hoses and couplings for any leaks with dishwashing foam to make sure no CO2 is lost.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
CO2 Indicator Solution is for use with the Seachem glass PH checker. This indicator solution changes color according to changes in the pH of the aquarium as a result of CO2 gas. The pH checker makes monitoring CO2 concentrations and pH level in planted aquaria easy.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Best way to diffuse CO2!
High resolve rate and great diffusing effect.
Description:
Patented impeller design, completely crushes CO2 bubbles.
Promise the best CO2 dissollution rate effect.
Compact size for saving space, suitable to set external or intenal tank.
Durable material for preventing deformation and acid resistant.
Easy to clean and simple to maintain.
9 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
This Glass Diffuser is not only a diffuser but also a Bubble Counter.
Made with high quality glass and an elegant design.
The Quartz diffuser disc creates micro-bubbles.
Because of the S shape design there is no need for suction cups.
Easy to install
Two Sizes: Small and Large
Ista’s CO2 cylinders safety standards are approved by Technical Inspection Association (TUV)
Supporting base keeps CO2 cylinder in position avoiding any potential damage to the CO2 regulator.
Aluminum CO2 flow regulator provides easy assembling, constant and reliable CO2 dosing rate.
2 in 1 CO2 diffuser provides clear CO2 bubble reading and the best CO2 diffusing effect.
Stainless spring design check valve assures most reliable function of stopping backflow. Fastening node assures no bursting out of air tube.
Seamless aluminum CO2 cylinder.
Stylish design brings additional elegancy to your aquarium set up.
Included in set:
1 cylinder (0.5L) full weight pressurized CO2 liquid
1 cylinder supporting base
1 CO2 regulator
1 (2 in 1) CO2 diffuser & bubble counter
1 spring check valve
1 flexible tube
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Contains 95g of pressurized liquid Co2. Full weight of pressurized liquid CO2 assured for the best value compared to other existing similar cartridges in the market. Strict quality control and safety guaranteed. Disposable cartridge free from the trouble of Co2 refilling. Simple and easy in cartridge change.
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Screw fastening device for fastening air pipe and assuring no CO2 leaks out.
Acrylic material allows accurate CO2 bubble reading.
Easy assembling for cleaning and refilling with water.
Only compatible with Strideways CO2 regulator PLUS
3 year warranty
Each manifold block comes with a built-in bubble counter
Includes a built-in bubble counter, to create ease for the user. Each Strideways Extender Manifold Block can be individually tuned to allow precise control over CO2 levels for every new block. Useful for aquarium setups with differing CO2 levels, while also bypassing the need for more than one regulator.
This modular CO2 system allows you to add more than one exit, completely Plug&Play, to offers the possibility of connecting one single bottle of CO2 to more than one aquarium. Designed for use with standard DIN477 CO2 cylinders and it also offers a DC solenoid valve, for a high durability and low heating operation.
Only compatible with Strideways CO2 regulator PLUS.
Included:
Bubble counter;
High precision needle valve;
Tools to install the extender block into your existing manifold
Extra O-Ring for the manifold block.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Dennerle CO2 pH-electrode set is used for continuous measurement of the pH-value in freshwater- and marine aquariums. The modern gel electrode is the basis for optimal fish and plant care. The gel electrode also has a Quali-Safe electrode protection. Including calibration station for quick and convenient calibration. The calibration station saves valuable calibration solution. The connection cable has a length of 3 metres. For or all Dennerle pH controllers and all pH measuring devices with BNC connector.
Features
Complete set
Modern gel-electrode
Ready for immediate use
With calibration solution pH 4 and pH 7
For all Dennerle pH controllers and all pH measuring devices with BNC connector
Scope of delivery
Modern gel-electrode
Electrode holder
Calibrating station
50 ml pH 4 calibrating solution
50 ml pH 7 calibrating solution
250 ml Distilled water
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
CO2 addition device for freshwater aquaria
UNIVERSALLY APPLICABLE. DENNERLE CO2 addition units can be combined with all DENNERLE CO2 fertilization systems. They are also ideal for retrofitting or increasing the performance of existing CO2 systems. False gas venting: Whenever a CO2 bubble dissolves in the water, other gases naturally dissolved in the aquarium water (e.g. nitrogen) simultaneously enter this CO2 bubble. All DENNERLE CO2 addition units therefore have a specially developed false gas vent. Here, the false gases are separated from the – significantly heavier – CO2 and are automatically discharged at regular intervals. Possible “clogging” of the units by false gases is effectively prevented. DENNERLE CO2 addition units are therefore highly effective. The valuable CO2 is used in the best possible way.
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
For highly effective CO2 dissolution through nano atomization
Controlled supply through integrated bubble counter
Also suitable for Bio CO2 systems
Made of high-quality, transparent acrylic
Ultra-compact form – can be installed “invisibly” in the aquarium
With suction holder
For hoses 4/6 mm
Mount vertically in the aquarium for a few hours before use so that the diffuser fills with a little water.Dennerle offers a series of ultra-modern CO2 addition units under the name “CO2 Diffusor Ultra”. The diffusers are made of transparent, break-proof acrylic. This makes them considerably safer to handle than conventional glass diffusers and also ideal for children’s aquariums, for example. Due to their ultra-compact shape, they can be installed “invisibly” in the aquarium using the suction holder provided. Thanks to their attractive appearance, however, they are not disturbing in the visible area either. The newly developed membranes are manufactured from a special sintered material with extremely small pores. The resulting nano-atomization of the supplied CO2 ensures a highly effective and safe dissolution of this important plant nutrient in the aquarium. With the help of the integrated bubble counter, the amount of CO2 added can be easily checked at any time.The CO2 Diffusers Ultra can be combined with all common CO2 systems, e.g. the Dennerle disposable and reusable systems Carbo START, Carbo POWER and Carbo NIGHT. Due to the much lower operating pressure of approx. 0.3-0.5 bar compared to classic glass diffusers, the CO2 Diffusers Ultra are also ideally suited for bio CO2 systems. The hose connection fits all commercially available CO2 hoses with 4/6 mm, e.g. the Dennerle special CO2 hose. The CO2 Diffuser Ultra S is suitable for aquariums up to 100 L and therefore very popular especially for nano aquariums. The model M supplies aquariums up to 200 L, the model L aquariums up to 400 L
The Dennerle Bio CO2 fertiliser system Carbo Bio Style 120 supplies all freshwater aquariums up to 120 litres with vital CO2. The system is ready for operation in just a few steps. CO2 production starts after just 24 to 48 hours. A Bio CO2 diffuser specially designed for low operating pressure ensures fast, effective dissolution of the valuable CO2 in the aquarium water. Thanks to its modern, timeless design, the fertiliser unit also cuts a fine figure standing directly next to the aquarium. A pressure relief valve, pressure-resistant CO2 hose and solid hose fittings ensure a high level of operating safety. The Carbo Bio Style 120 CO2 fertiliser system is designed to be particularly sustainable: The stainless steel reaction tank is refillable and can be used for many years, the CO2 Constant gel consists of 100 % renewable raw materials.Dennerle BIO CO2 exploits the well-known fact that yeast cells are able to produce CO2 from sugar in the absence of oxygen. A problematic aspect is the fact that a fermentation process with pure sugar normally begins at a very fast pace, only to drop away substantially after just a few days. As a result, the aquarium receives too much CO2 at the beginning, and too little shortly after. In contrast, Dennerle BIO CO2 with CO2 control gel produces a virtually constant level of CO2 continuously for over 30 days, that is, for more than a month! Each CO2 bottle produces well over 300,000 CO2 bubbles. This assures your aquarium of an ideal supply of CO2 every day.
The CO2 production and supply are carried out fully automatically and in the right quantities. Nothing needs to be set or measured. The ultimate in simplicity and convenience. This makes Dennerle BIO CO2 ideal for all those who are as yet unaquainted with CO2 fertilization and for those who may wish to try the method out. After only a few weeks of CO2 fertilization, the results become evident: Plant growth improves substantially, the plants are greener, stronger and display greater vitality. The whole aquarium is brought to life.
Dennerle CO2 Set Carbo Bio Style 120
complete set for even CO2 fertilisation
with CO2 Constant Gel made from 100 % renewable raw materials
for healthy, strong plants and bright colours
for at least 40 days of constant CO2 production
carbon is the most important nutrient for aquarium plants
for aquariums up to approx. 120 litres content
CO2 Carbo Bio Depot 120
Carbo Bio Activator
Carbo Bio Diffusor -CO2 dissolving unit
transparent CO2 hose 1.5 m
Complete set for uniform CO2 fertilization
With CO2 Constant Gel made from 100 % renewable raw materials
For healthy, strong plants and bright colors
For at least 2 x 40 days of steady CO2 production
Carbon is the most important nutrient for aquarium plants
Carbo Bio Start 80
The Carbo Bio Start 80 bio CO2 fertilizer system supplies all freshwater aquaria up to 80 liters (21.13 US gal.) with vital CO2. It is ready for operation in just a few steps. CO2 production already starts after 24 to 48 hours. A pressure-resistant CO2 hose and a CO2 Micro Flipper specially designed for low operating pressure ensure fast, effective dissolution of the valuable CO2 in the aquarium water.
Carbon: the basis of life for all plants
Plants consist of almost 50 % carbon. CO2 is therefore their most important nutrient. It serves as the basic building block for photosynthesis. From CO2, water and light, they produce their most important building material and energy source: sugar. As a „waste material“, oxygen is produced, which all animals need to breathe.Without the addition of CO2, the level in aquaria is always too low. Plants therefore grow only slowly or not at all. This in turn means little oxygen production for fish and shrimp, but above all the risk of algae problems increases significantly. Well growing aquatic plants are the best prevention against algae!Only a regular addition of CO2 creates the natural basis for healthy, strong plant growth, lush green leaves and bright colours. The plants produce more oxygen for the fish, ensure better water quality and actively prevent algae.
CO2 Production
The valuable carbon is produced by a 100 % natural bio-reaction. Selected microorganisms, in combination with the CO2 Constant gel developed by Dennerle, supply an almost constant amount of CO2 (per filling) for at least 40 days.In conventional Bio CO2 systems, on the other hand, which work with white household sugar, CO2 production tends to be very irregular. It usually starts very quickly, but drops sharply again after just a few days, i.e. initially too much CO2 is produced, and later on too little. These systems are therefore less suitable for aquaristic practice.
The Carbo Bio Start 60 bio CO2 fertilizer system supplies all freshwater aquaria up to 60 liters (15.85 US gal.) with vital CO2. It is ready for operation in just a few steps. CO2 production already starts after 24 to 48 hours. A pressure-resistant CO2 hose and a CO2 Mini-Topper specially designed for low operating pressure – or optionally, a CO2 Injector for the connection to a Dennerle Corner Filter 40 or 60 – ensure fast, effective dissolution of the valuable CO2 in the aquarium water.
Carbon: the basis of life for all plants
Plants consist of almost 50 % carbon. CO2 is therefore their most important nutrient. It serves as the basic building block for photosynthesis. From CO2, water and light, they produce their most important building material and energy source: sugar. As a „waste material“, oxygen is produced, which all animals need to breathe.Without the addition of CO2, the level in aquaria is always too low. Plants therefore grow only slowly or not at all. This in turn means little oxygen production for fish and shrimp, but above all the risk of algae problems increases significantly. Well growing aquatic plants are the best prevention against algae!Only a regular addition of CO2 creates the natural basis for healthy, strong plant growth, lush green leaves and bright colors. The plants produce more oxygen for the fish, ensure better water quality and actively prevent algae.
CO2 Production
The valuable carbon is produced by a 100 % natural bio-reaction. Selected microorganisms, in combination with the CO2 Constant gel developed by Dennerle, supply an almost constant amount of CO2 (per filling) for at least 40 days.In conventional Bio CO2 systems, on the other hand, which work with white household sugar, CO2 production tends to be very irregular. It usually starts very quickly, but drops sharply again after just a few days, i.e. initially too much CO2 is produced, and later on too little. These systems are therefore less suitable for aquaristic practice.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Patented, Variable Magnetic Circuit,High EfficiencyOperating Voltage : Full Range AC100V to 230V .Can Be High Speed Drive 6000 cycle/Minutewhile use DC150V.No Vibration Noise Sound from current flow.
Media
Air, Water, Oil inert gases
Operating method
Direct acting
Model
A2AD 2/2 way, A3AD 3/2 way
Effective Sectional area mm2 (CV)
4.9 (0.27)
Pipe joint size
1/8" / 1/4"
Viscosity
21c ST
Service pressure rangekgf/cm2 (psi)
0-20 (0-286)
Pressure resistancekgf/cm2 (psi)
30 (429)
Service Temperature range(atmosphere or fluid used)
-10 to 60ºC
Power consumption
AC 110V: 10VA /10mS. (inrush)0.25 VA (hold)AC 220V: 40VA / 10mS. (inrush)1VA (hold)
Insulation
F class
Rating
100%
Protection
IP65
Cable Plug
DIN 43 650 B, 0-250V
Body Material
Brass / Stainless steel
Seal Material
NBR, FPM
Weight (g)
170
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
IMPORTANT NOTE – Saga – CO2 Super Diffuser: You need to soak the Saga – CO2 Super Diffuser for 2 to 3 days before you use it, in order for the ceramic to be come saturated.
It has excellent CO2 dissolution rates. Easy maintenance and durable materials make this CO2 Aquarium Diffuser a perfect choice for novice and expert aquascapers alike. It is designed to be used as a regular glass CO2 atomizer diffuser, but it offers higher CO2 dissolution rates.
The diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut.It is recommended that you set the pressure on your regulator to a minimum 2 bar as a starting point.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Experience lush plant growth with the SAGA CO2 Super Atomizer. With its advanced CO2 delivery technology, the SAGA Atomizer provides aquarium plants with the ideal environment to enhance growth and development. The Atomizer's precision ensures optimal CO2 levels to help promote healthy aquatic life.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Experience lush plant growth with the SAGA CO2 Atomizer. With its advanced CO2 delivery technology, the SAGA Atomizer provides aquarium plants with the ideal environment to enhance growth and development. The Atomizer's precision ensures optimal CO2 levels to help promote healthy aquatic life.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The 17 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2 gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2 injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 16 mm ID/22 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 27 mm disc allows for the diffusion of large volumes of CO2 gas, making the 27 mm Beetle Diffuser an excellent choice for mid-sized aquaria or higher-growth aquaria.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
