Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Aqua Illumination Extremely Versatile Mounting, Spectrum, and Sizing Options...
Aquarium Lighting, Your Way!
Available in 7 different sizes from 12 to 66 inches Balanced white spectrum with highly tunable kelvin range Mounting solutions for every tank need Cluster group LED diodes with 95-degree spread EdgeFieldTM Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest or Mounting Clips included Color Your Way This is far from your typical strip LED!
The Blade maximizes color and efficiency, incorporating exclusive EdgeFieldTM Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide-angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing. When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost! You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Available Color Spectrums: Coral Grow Coral Glow Refugium Freshwater The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs.
It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group: 16x Cool White 4x Warm White 2x Red 2x Blue Mount Your Way The AI Blade is designed for a myriad of mounting solutions to satisfy any system.
Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Control Your Way The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. Compatible with MXM Neptune Systems, EcoTech Marine, and AquaIllumination have joined forces to bring MXM to life.
Now all your favorite EcoTech and AI pumps and lights can be under the wireless control of Apex & Apex Fusion—the user-friendly, yet powerful, interface you already know and love. No more switching between multiple apps.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
AI Blade LED Elevated Tank Mount - Aqua Illumination An attractive and sturdy tank mount for the Blade Smart LED Strip Lights from Aqua Illumination. As an alternative to the Low Profile Tank Rest that's included with AI Blade LED fixtures up to 39", the Elevated Tank Rest increases light spread and allows for easier access into the aquarium. Compatible with both rimmed or rimless tanks.
12 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea SKIMMERS - High performance REEF-SPEC® Skimmers
Designed with hobbyists needs in mind the highly effective flow dynamics of the REEFER™ Skimmer will maintain an optimal ORP (REDOX) level of over 350mv, a level that is normally associated with the application of ozone.
Ratings:
REEFER™ Skimmers are rated according to Red Sea’s REEF-SPEC® criteria that includes a water throughput, water to air ratio and contact time necessary to efficiently strip pollutants from the water. Powered by Sicce PSK pumps, the stated air and water flow rates are actual measurements of these pumps when running on REEFER™ Skimmers.
Reefer 300 Skimmer - Rated for a 600L Mixed Reef System
Reefer 600 Skimmer - Rated for a 1200L Mixed Reef System
Reefer 900 Skimmer - Rated for a 1800L Mixed Reef System
Key Features
Ergonomic diffusion chamber evenly disperses the fine bubbles created by the PSK pump across the skimmer cone, without reducing air or water flow.•
Quiet operation, with vibration absorbing components and a large air intake silencer.
3 assembly options for flexible positioning of the pump inlet and regulation valve according to your sump.
Foam-View window in the collection cup to easily monitor and adjust the foam height.
Built-in manual cup cleaner.
Precision geared valve for positive flow regulation.
Quick release pump holder for easy maintenance.
Drainage port with 1m valved hose
The new Deltec 400i 24v DC protein skimmer is suitable for aquariums from 100 up to 400 liters.
The Deltec 400i comes with some great safety features. Should the water level in the sump suddenly exceed the maximum depth for the skimmer, or the air feed becomes blocked, the new emergency overflow system prevents the collection cup from overflowing. As the water level rises within the protein skimmer the air feed to the pump will shut off automatically via the emergency overflow further reducing the chance of foam flooding the skimmer cup.
The base is a new hollow design where the water flows through to the level adjustment and indicator tubes. This new design feature means that water will exit the protein skimmer body from the lowest point greatly reducing the chance of micro bubbles escaping the body, increasing air- water contact time and also reducing noise and turbulence within the protein skimmer body.Removing the pump for cleaning and maintenance can be achieved in 20 seconds, thus keeping the skimmer running at optimal efficiency is a breeze.With the body of the skimmer being a cylinder and not tapered or conical shape, all the small air bubbles can rise unhindered, fully saturated and will only burst in the foam pot riser, adding to the efficiency and performance of Deltec skimmersProduct Details:
New footplace design allowing water to return through the footplate to aid degassing and reduce turbulence within the body
Highly efficient cylinder shape
New developed emergency overflow with water level indicator
Extremely quiet operation due to new hollow chamber floor
Extremely low power consumption
Quick and easy removal of the pump
Variable adjustable DC pump
Technical Details:
Aquarium Size 100 to 400 litres
Dimensions: 20.5 x 12,5 x 50.5 cm
Pump: Deltec DCC1
Power Consumption: 9 Watts with 350 liters of air (in normal operation)
For sumps with 15 to 25 cm water level
PumpThe Deltec Skimmer 400i is operated with the Deltec DCC1. With only 9 watts about 350 liters of air are generated.Cleaning SystemFor the Deltec Skimmer 400i, there is an optional cleaning head system, whereby the inner standpipe is cleaned by deposits by turning the connection cup. If these deposits are not removed at regular intervals, the skimming performance is drastically reduced over time as foam bubbles burst prematurely at this layer and thus cannot contribute to water purification.Cylindrical ShapeThanks to the ergonomic cylinder shape, the Deltec Skimmer 400i achieves the best skimming results. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated and burst only in the riser of the connection cup. From there, the collected broth can be discharged via a drain hose without having to take the connection cup.
Emergency OverflowThe water level in the skimmer can be read off at the emergency overflow pipe. Furthermore, the marks for the minimum and maximum level help with the perfect adjustment of the water level. Due to the possibility of exchanging the emergency overflow pipe with the regulator pipe, you can decide for yourself how the pipes are arranged.Disassembly, Dimensions & ConstructionRegularly required cleaning of the pump is very easy thanks to the easy and fast disassembly of the skimmer. According to the manufacturer, the pump can be removed from the skimmer in a few seconds. The Deltec Skimmer 600i can be mounted and disassembled without tools. The dimensions of the skimmer are selected so that you can place them comfortably in your filter basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate the skimmer variably in 15 to 25 cm water depth.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Small space save skimmers, perfect for all in one tanks!
Specially designed high-efficient skimmer body
High performance in-sump protein skimmer
Quality Injection molding product
Skimmer Z5Bubble-magus Rock SP1500 pumpAC 120V/60Hz, 18WFootprint: 6.3” x 3.9”Height: 18.9”Aquariums 300-500LWater level 8”
Bubble Magus Z6 Protein Skimmer with DC PumpSkimmer Z6Bubble-magus Rock DSP1000 pumpDC 24V, 13WFootprint: 6.3” x 3.9”Height: 18.9”Aquariums 300-500LWater level 8”
Bubble Magus Z7 Protein SkimmerSkimmer Z7Bubble-magus Rock SP2000 pumpAquariums 500-700LFootprint: 7.9” x 5.1” (200x130mm)Height: 21.3” (540mm)
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates.
11 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Not Just an Auto Top Off System...It's so Much More!
Reliable Auto Top Off System
Built-in Temperature Monitor
Leak Detector Included
ReefBeat App Connected
Not Just for Red Sea Aquariums*
*If you own a Red Sea Reefer Aquarium, check out the ReefATO+ Upgrade Kit instead.
Water Level Sensor
Ultra Reliable. The ReefATO+ sensor features a built-in backup sensor 1" above the primary sensors to automatically shut down the ATO pump in the event of an overfill. With multiple probes built onto the sensor, an indication of actual water level can always be seen on the ReefBeat App.
Temperature Monitoring
The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of ±0.1°. The ReefBeat App allows you to set a narrow “desired” temperature range, and a slightly wider “acceptable” range, that will be seen on-line in the ReefBeat App and in the full temperature logs. If the temperature goes outside the acceptable range, you will get a notification to your smartphone. The detailed logs will show you the minimum, maximum and average temperatures at 15-minute intervals for the past 28 days.
ATO Pump
Quiet, variable flow, 12 vdc ATO pump
Diameter of just 1.8” to fit inside small ATO reservoir openings
Max flow rate 75 gph, Max head 8’, power 6–10W
Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls, or if your RO reservoir runs dry
Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 18 gph. This ensures a splash proof and quiet flow of water into the sump
The noise damping rubber impellor chamber cover and impellor can be removed for pump maintenance
Includes locknut on the outlet hose barb for secure connection to the silicon tubing
Leak Detector
The highly sensitive, Reef-Spec leak detector (with saltwater resistant titanium probes) detects both saltwater and RO/DI water. If a leak is detected, the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device.
Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Smart Controller
Reliably control all the ReefATO+ components and connect them to the ReefBeat ecosystem where you can view the current water level in the pump chamber, see the number of fills and volume of water added to your aquarium over the last 28 days, monitor records of minimum/maximum/average aquarium water temperature over the last 28 days, and modify settings to meet your aquarium's needs. Connection to the ReefBeat App will also allow you to receive notifications if something goes wrong.
Installation Kit
Sensor holder and magnetic corner mounting bracket for 12mm ½” glass
10′ – 1/16″ thick silicone tubing (ID 5mm / 0.2″)
Silent flow – Tube holder (clips on 4 – 12mm / ½” glass)
Siphon Breaker
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Say Goodbye to Manually Testing for Calcium, Alkalinity, or Magnesium in your Reef!
The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with the DOS (available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels.
Automatically performs Calcium, Alkalinity, and Magnesium tests
Includes 1-month of reagent
Combine with Neptune DoS for automated dosing
Programmable alerts for out of range parameters
Data is graphed for easy to comprehend tank stats
Can be set-up and integrated with your Apex in less than 15 minutes
Empties used reagents and sample into an external vessel (not included)
Up to one month of testing before reagents need changing; based on 4-Alk, 2-Ca, 2-Mg tests per day
Note: Requires Neptune Apex or ApexEL with an open 1Link OR a 24V Power and Aquabus cable
How It Works
The Trident is a self-contained automatic titration colorimeter. That’s quite a mouthful, for sure, so let’s state it as simply as we can. The Trident is basically automating what you (and top scientists) do already when you test your water, that is, perform a color changing titration and interpret the results.
On a scheduled basis the Trident carefully mixes its reagents with a small amount of sample water from your aquarium. While doing this, it is measuring (titrating with a precision peristaltic pump) the amounts of each that are necessary to reach an expected color change (determined by the electronic colorimeter). When it finishes the titration, it sends this sample/reagent fluid to your waste container. It then interprets the results of that test and logs the value into your Apex.
Easy Plug & Play Setup
From the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app — it holds your hand through the installation with helpful videos along the way.
Consistency & Precision
The Trident tests with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. This is better than humans can do consistently with every hobby-grade test kit on the market.
Understand Your Reef Tank Like Never Before
When you start getting the regular data coming in from the Trident you will be amazed at the things you can see happening. The daily light cycle swing on calcium carbonate uptake. A salinity drop by watching magnesium. An out of sync dosing of calcium. This increased understanding ultimately helps you maintain a better, more successful reef.
Instant Alerts
You can set up your Apex to alert you, or take immediate action(s) when a parameter falls outside of the safe zone you specify. As just one example, you might be dosing an Alkalinity solution and a misconfiguration could lead to overdosing of your tank. The Trident will catch that, alert you, and give you more time to make that correction before its too late and to save your aquarium. The data from the Trident can also be used to turn on and off other devices (like dosers or solenoids) to protect your tank even more.
Ultimate Stability with the Neptune DŌS
The more stable you maintain proper levels of Alkalinity, Calcium, and Magnesium, the better your corals will grow and thrive. But coral uptake of these supplements often changes and requires us not only to perform more testing but also seems to put us in a never-ending state of adjusting our dosing levels.
The Trident, when paired up with one or more of our DŌS systems solves this problem with Automatic Dosing Control (ADC)
When configured on the Apex, ADC will take the results it receives from the Trident and uses them to gradually turn up or down the amount of additive your DŌS delivers. But, don’t worry, we have built this feature with safety in mind. With ADC you set your target value and your starting dosing amount and ADC will only tune that dosing level +/-35%. If it takes more than that amount of dosing to keep your aquarium at your target value, then the Apex will stop ADC, revert to your starting dosing amount, and alert you that you need to manually adjust your dosing level. Then, ADC can be re-enabled and it will continue to guide your DŌS so that it keeps you as close to your target value as possible.
It is possible to use ADC for all three tests – Alkalinity, Calcium, and Magnesium. You can also use one test value to adjust up or down more than one additive delivered by the DŌS (i.e. Triton system).
Simple Reagent Changes
When using the default testing schedule of four (4) alkalinity, two (2) calcium, and two (2) magnesium tests a day, the reagent stored inside the Apex will last a full month. And adding new reagent is super simple — just slide out the drawer, remove the old bottle(s), and replace them with new ones. If you desire, you can also run a calibration session with the included calibration standard.
The cost of reagents and the recurring cost is a valid concern for a hobbyist considering the test kit or automated system – and we designed the Trident with that in mind – keeping those costs as low as possible. Reagent comes in 2-month kits (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day). These kits include two bottles of Reagent A (changed every month), one each of Reagent B and C (changed every two months), and one bottle of our calibration seawater sample. The reagent kit has at least 240 alkalinity tests and 120 tests each of Calcium and Magnesium. These two-month kits are priced at just $44.95 in the U.S.
Ultra-Quiet Testing
You will hear the Trident operate from time to time if you listen closely or you have a super-quiet room. And, as compared to other automated testing systems, it is several dB quieter. While inside your cabinet along with your other equipment, you will likely never even hear it.
Specifications:
Dimensions: 4.25” x 12” x 10”
Alkalinity Precision: +/-.05 dKh
Calcium Precision: +/-15 ppm
Magnesium Precision: +/-15 ppm
Testing Time: Around 7 minutes per test
Sample Water Required: Around 8mL per test
Max Head: Must be less than 4' from the water sample
What's Included?
1x Trident System
1x 1Link Cable
5' Black Sample Tubing
5' Clear Waste Tubing
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea Ammonia Marine Test Marine Kit is an advanced colorimetric test measuring the total ammonia (NH3/NH4) in marine aquariums to an accuracy of 0.2 ppm.
Red Sea Ammonia Marine Test Kit simple to use test kit is essential during the initial stage of the biological maturation of all marine and reef aquariums.
Red Sea Ammonia MarineTest Kit Includes 100 tests.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Control two ReefRun pumps with a single controller!
Integrates with Red Sea's ReefBeat app
Compatible with ReefRun return & skimmer pumps
Customize feed, maintenance, and emergency modes
The ReefRun Dual DC Pump Controller is needed to operate Red Sea's ReefRun line of pumps. Each controller can support two ReefRun pumps, meaning that you can run a dual ReefRun return system or ReefRun pump + ReefRun skimmer pump without purchasing a second controller. A big cost savings if you're running or plan to run two of these pumps.
Multiple Modes:Constant Flow: Perfect for a return pump where you want a steady flow rate 24/7Feed Mode: Easily turn the pump down or off completely when you want to feed your tank inhabitantsWave Maker: Schedule varied flow throughout the day for closed loop systemsCustom: Create your own flow pattern to best meet your needs
Compatible Pumps:
ReefRun 5500 (530 - 1450 GPH)ReefRun 7000 (800 - 1900 GPH)ReefRun 9000 (1000 - 2500 GPH)ReefRun Skimmer Pumps
What's in the Box
ReefRun Dual DC Pump ControllerMounting Bracket
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Reliable, Controllable, and ReefBeat app ready!
Integrates with Red Sea's ReefBeat app
Run-dry & disconnection notifications
Customized feed, maintenance, and emergency modes
Quiet & energy-efficient
5-year warranty
Based on the wildly successful and reliable Sicce platform, the Red Sea ReefRun pumps feature a familiar look and feel, but with some big upgrades. In addition to being able to set the daily flow schedule and activate feed modes, you'll also get notifications if your pump is running dry, disconnects, or is otherwise malfunctioning, allowing you to quickly fix the problem and get everything back up and running without missing a beat. The ReefRun Controller (sold separately) can run two ReefRun pumps, meaning that you can run a dual ReefRun return system or ReefRun pump + ReefRun skimmer pump without purchasing a second controller.
Multiple Modes:Constant Flow: Perfect for a return pump where you want a steady flow rate 24/7Feed Mode: Easily turn the pump down or off completely when you want to feed your tank inhabitantsWave Maker: Schedule varied flow throughout the day for closed loop systemsCustom: Create your own flow pattern to best meet your needs
Specifications:
Flow Rate: 530 - 1450 GPHOutput: 5/8" - 1" Stepped Barb or Connector for 3/4" or 1" PVCMax Head Height: 11.5 ftWattage: 10-40WPower Cable Length: 10 ftPump Connection Cable Length: 3.3 ft
What's in the Box
ReefRun 5500 PumpPower SupplyConnection CablesPump output fittings
*Requires ReefRun Controller (sold separately)
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Remote control ,motor and drive separation.
Adjustable flow,AC brushless frequency conversion.energy efficient .
Wear-resistant ceramic shaft,ult-quiet,long life.
IC chip control,lack of water ,stuck protection.
Suitable for freshwater and marine use. 10 minutes pause feeding function.
17 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Cyclops
Cyclops (Copepods). Food suitable for all types of small and growing tropical aquarium and marine fish. Feed to your fish once or twice per day. Small multiple feedings for larger fry. Only give the amount your fish can consume within 3-5 minutes.
16 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
RUTO - CHOPPED MUSSEL 100G is a frozen fish food product, specifically chopped mussel meat, marketed as a marine protein source for various aquarium fish and invertebrates. It's part of the Ruto Frozen Food line and comes in 100g blister packs, designed for easy feeding and storage in freezers. The product is suitable for both freshwater and saltwater aquariums.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
It offers essential fatty acids and necessary high-level proteins as part of the scientifically balanced nutrition.It contains clam extract which improves palatability, even finicky eaters will love it.Offers seaweed meal and pure-cultured spirulina to meet the nutritional requirements of plant-eating marine fishes, while providing them the nutrient sources they require to look like they just came off the reef.A unique blend of necessary nutrients that help support immune system health.Softens rapidly while triggering natural, instinctual grazing. The easily digested formula aids utilization thereby reducing waste output and helping to improve water quality with continued use.
20 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Our Artemia Cysts, also known as Brine Shrimp Eggs, have a hatching percentage of more than 90%. They will hatch into Artemia nauplii (baby brine shrimp) in 18 to 30 hours. Artemia nauplii are known to be the ideal live food for the first stages of many marine and freshwater tropical fish and for many invertebrates.
100% of the finest brine shrimp eggs from the Great Salt Lake!
Innovative Nitro Pack inner package assures a great hatch (> 90% hatching percentage).
Ideal for reef tanks and baby fish!
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Bag is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life. Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces. Sizes: 13 x 25.5 cm (5” x 9.5”)
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Customizable DIY Aquarium Net Cover
Keep your finny friends safe inside your tank with a customizable Red Sea Aquarium Net Cover.
With a sleek profile and minimalist hangers the Red Sea Net Cover blends in seamlessly even on ultra-clear, rimless, open-top aquariums.
The extra strong aluminum frame and purpose designed components allow the extra thin transparent net cover to be customized to accommodate rim-mounted equipment such as lighting arms, auto-feeders and overflow boxes.
Check out our how-to video that shows exactly how to assemble Red Sea’s fish saver, step-by-step. Keep in mind that this is a Do-it-Yourself cover, and while it offers versatility and customizability at a fraction of the cost of custom-built covers, it does require proper DIY skills including planning, taking exact measurements and cutting aluminum profiles. So if you aren’t a DIY project kind of hobbyist, you can always ask your local dealer or a handy friend to help.
Designed specifically for rimless tanks the Red Sea cover also works well with braced tanks such as the MAX® S-series.
Main Features:
Suitable for most open-top aquariums
Extra strong, customized aluminum profiles
8mm (5/16″) thin strand, transparent netting
Inside-rim or on-rim mounting options
Includes components for one customized cut-out for filters
Components available to accommodate additional rim-mounted equipment
Includes spline roller
Contents of DIY Aquarium Net Cover Kit:
Aluminum frame sections/profiles
Internal and external frame corners
Spacers and hangers
8mm (5/16″) netting, which can be cut to size
Spline rubber for attaching the net to the frame
Spline roller for inserting the spline
Example of Red Sea REEFER™ 350 Deluxe with cutouts for overflow and LED lights
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Flatworm eXit itself is quite safe to fish and invertebrates.However, the body fluids of flatworms can be toxic to some reef inhabitants when present in a too high concentration. This body fluid is sometimes excreted when flatworms die.So when you use this product it is important to do the following first:1] Siphon out as many flatworms as possible.2] Keep sufficient fresh activated carbon in a canister ready.3] Turn off UV, ozone and remove activated carbon. Keep the skimmer turned on.Important remarksBelow given remarks are a.o. meant to reduce the amount of the flatworm’s toxic body fluids in the water.Many people have treated their reef tank(s) successfully using Flatworm eXit without any problems. The most important factors are reducing the number of flatworms before commencing with the treatment and reducing the amount of the flatworm’s body fluids, released when they die, as fast as possible.Do not underestimate the number of flatworms in your system. In a few cases a significant number of flatworms can be hiding in for example crevices. Blow in such and any other potential hiding places water to blow any flatworm out of there. For that purpose you can use a powerhead or a turkey baster. Siphon out those flatworms as well.Furthermore do not underestimate the amount of toxic body fluids these flatworms can excrete. This can be reduced significantly by really siphoning out the flatworms before commencing with the treatment. Further significant reduction is accomplished by siphoning out as many dead flatworms as you can.Any body fluids released by the dead flatworms in the water has to be reduced further by using about 1 pound of fresh high quality carbon for every 50 gallons. The carbon has to be used in a canister with a sufficient forced water flow.Take sufficient time for treating the tank. That is, do not treat your tank in a hurry. Also take time to monitor your tank for at least 6 hours after the treatment.It is also wise to have at least 25% water ready for a water change if required.Dosage:Read all the above text before commencing with the treatment!- 1 drop for every 4 liters or 1 gallon.The dropper contains approx. 300 drops (10 ml). The dropper cap holds approx. 90 drops.So 1 cap full is good for 360 liters or 90 gallons.Add it in a high flow area of the tank. If you want to treat a refugium only and if it’s volume is too small for using a powerhead then mixing should be done manually.- It should start to work within 30 minutes.- If within 45 minutes no visible death of flatworms occurs add 50% more.- As soon as the flatworms start to die commence with the activated carbon to take out any toxic body fluids. Also see the above given important remarks.- After an hour or so you can turn any UV or ozone on again.Keep out of the reach of children! Only for aquarium hobby use.
High quality aragonitic calcium carbonate in a small rubble size, perfect for your fragging projects, a jawfish or firefish habitat, creating a cryptic zone or, on the freshwater side; use it as a pond filter media or for your African Cichlids. The only limits for it's use are your imagination! Enjoy the perfect refugium and so much more with Rubble Zone
9 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Replenishment of a number of trace elements is required to maintain an environment ideal for the growth and reproduction of marine life, but while the importance of trace elements has been recognized by aquarists for many years, the physiological reasons are not fully understood. The chemical elements in seawater are varied, and, likewise their addition to the aquarium in trace quantities has varied effects on a variety of saltwater plant and invertebrate species. In general, though, these elements are important for metabolic processes and pigment formation. Addition of iron, for instance, has been shown to benefit coloring and growth for corals, anenomes, and other photosynthetic animals.
Reef Trace supplies a broad range of trace elements demonstrated to be necessary for proper reef health and growth. Trace elements are normally depleted by utilization, oxidation and precipitation. The latter two processes occur more rapidly than with other micronutrients. This makes it important to restore trace elements on a regular basis. Reef Trace may be used alone or in conjunction with Reef Plus. Best results are obtained when both are used. Reef Trace is nitrate/phosphate free.
9 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Reef Plus is a full spectrum reef supplement containing trace elements, vitamins, and amino acids demonstrated to have a positive impact on the growth of corals and other desirable reef creatures. Reef Plus is formulated to provide nutrients available from natural tropical reef waters. Contains vitamin B12, vitamin C, thiamine, inositol, choline, iodide, and other essential constituents. Reef Plus is nitrate/phosphate free.
Other manufacturers vitamin supplements are incomplete, containing only vitamins and trace minerals. Reef Plus contains necessary amino acids in addition to a full complement of trace minerals and high amounts of vitamin C and B complex vitamins. It is so concentrated that it can be effectively used as a food soak for frozen fish foods.
Replenishment of a number of trace elements is required to maintain an environment ideal for the growth and reproduction of marine life, but while the importance of trace elements has been recognized by aquarists for many years, the physiological reasons are not fully understood. The chemical elements in seawater are varied, and, likewise their addition to the aquarium in trace quantities has varied effects on a variety of saltwater plant and invertebrate species. In general, though, these elements are important for metabolic processes and pigment formation. Addition of iron, for instance, has been shown to benefit coloring and growth for corals, anemones, and other photosynthetic animals.
![RedSea ReefRun 5500 DC Pump [W/O Controller]](//www.dorrypets.co.za/cdn/shop/files/251918-redsea-reefrun-5500-dc-pump-inp.webp?v=1705480369&width=645)
![RedSea ReefRun 5500 DC Pump [W/O Controller]](//www.dorrypets.co.za/cdn/shop/files/251918-redsea-reefrun-5500-dc-pump-an.webp?v=1705480368&width=645)
![Tank Net Screen 36"/90cm [Incl. 1 Univeral cut out]](//www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_759f3237-26f1-4a09-8fca-9e38f9d830cd.png?v=1591118136&width=645)
![RedSea ReefRun 5500 DC Pump [W/O Controller]](http://www.dorrypets.co.za/cdn/shop/files/251918-redsea-reefrun-5500-dc-pump-inp.webp?v=1705480369&width=645)
![RedSea ReefRun 5500 DC Pump [W/O Controller]](http://www.dorrypets.co.za/cdn/shop/files/251918-redsea-reefrun-5500-dc-pump-an.webp?v=1705480368&width=645)
![Tank Net Screen 36"/90cm [Incl. 1 Univeral cut out]](http://www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_759f3237-26f1-4a09-8fca-9e38f9d830cd.png?v=1591118136&width=645)
