Product information "HI713 Checker HC ® - Phosphate, LR (0.00 to 2.50 ppm (mg/L)"
Achieve accurate water testing results with our simple handheld colorimeter.
Trust your readings now, our low range phosphate colorimeter brings you more precise technology than your average chemical test kit. By determining your results digitally, our handheld colorimeter eliminates the effort of matching to a color chart.
Small and portable design to take it anywhere
Results are achieved easily with simple, one-button operation
Advance your technology and upgrade from your standard test kit
Details
The HI713 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure phosphate. Phosphate is a common food additive that enhances flavor and acts as a buffering agent. Important for growth and development of plant roots, phosphate is also present in fertilizers. However, high concentrations of phosphates are detrimental to the environment; for this reason, it is closely monitored in natural and municipal waters. Designed as a more accurate alternative to chemical test kits, the HI713 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Easier to use and more accurate than chemical test kits
Dedicated to a single parameter
Small size, big convenience
Ideal for: Water Quality, Aquaculture, Education, Agriculture
Specifications
Range
0.00 to 2.50 ppm
Resolution
0.01 ppm
Accuracy @ 25°C/77°F
±0.04 ppm ±4% of reading
Light Source
LED @ 525 nm
Light Detector
silicon photocell
Method
adaptation of the Standard Methods for the Examination of Water and Wastewater, 20th edition, Ascorbic-Acid method
Environment
0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type
(1) 1.5V AAA
Auto-off
after three minutes of non-use and two minutes after reading
Dimensions
81.5mm x 61mm x 37.5mm (3.2" x 2.4" x 1.5”)
Weight
64 g (2.25 oz.)
Ordering Information
HI713 Checker® is supplied with (2) sample cuvettes with caps, phosphate LR reagent starter kit for 6 tests (6 powder reagent packets), battery, instructions and quick start guide.
Warranty
1 year limited warranty
Aquael Flow Heater is the first flow heater to have a Smart Heating System (SHS) – intelligent power selection technology. The microprocessor adjusts the heating power to maintain the right temperature in the aquarium.This solution allows the heater to work smoothly – without temperature jumps in the aquarium and exposing its inhabitants to stress. Thanks to the electronic thermostat, the LED display shows not only the programmed, but also the current temperature of the water.Electronic temperature sensors protect the aquarium from overheating, and when they detect the cessation of water flow – they automatically turn off the device. Its location on the exhaust hose of the external filter allows for even distribution of heated water throughout the tank. The heater is mounted outside the aquarium, so it does not take up space inside and gives more freedom of arrangement.
The first intelligent flow heater
Equipped with Smart Heating System – adjusts the heating power to the size of the tank and environmental conditions, using only as much energy as needed
It has an electronic precision thermostat, operating with an accuracy of ± 0.5, in the range from 20 to 33 ° C
You can set the temperature conveniently with one button – One Touch System
LED display indicates the programmed and current temperature
3 temperature sensors – 2 electronic, 1 thermal fuse
The heater automatically turns off when the water flow ceases
For use on hoses with a diameter of 16 / 22 mm in freshwater and marine aquariums
The set includes a heater, two stable fixing brackets and clamping nuts
Made in Poland
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Focus is an antibacterial polymer for internal infections of fish. Focus is primarily intended to be mixed with food and/or other medications to make them palatable to fish and greatly reduce the loss of medication to the water through diffusion. For use in freshwater or marine aquaria.
When to Use a Medicated Food Mix...
Your fish has an internal infection Bloating, abnormal stools, loss of appetite, and weight loss are all signs of a potential internal infection.You are already treating with a medication in the water Sometimes fish will develop several infections at the same time, requiring multiple medications. We don't recommend dosing two medications into the water, but it is possible to put one medication in the food and the other in the water.There are corals, plants, or invertebrates in the tank Using a medicated food mix will prevent damage to delicate plants or invertebrates from medication.Active ingredients: Active ingredient: polymer bound nitrofurantoin (0.1%)
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Cupramine effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.
There is more than a four-fold concentration gap between the minimal therapeutic dose (0.2 mg/L) and the toxic dose (0.8 mg/L). Cupramine is easily removable with chemical filtration. It is highly effective and safe in freshwater as well as marine water.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
MetroPlex is an effective and safe treatment for several protozoan and anaerobic bacterial diseases of fish (Cryptocaryon, Hexamita, Ichthyophthirius). It does not adversely affect the filter bed and is easily removed with carbon. It can either be dosed into the water or combined with Focus in a medicated food mix. It will treat both internal and external infections regardless of the delivery method. When used in a medicated food mix, it is excellent for treating parasites in tanks that contain invertebrates. MetroPlex is gentle and there little danger of overdosing.
Active ingredients: metronidazole (70%) Inactive ingredients: excipients (30%)
IndicationsMetroPlex is appropriate for treating a variety of protozoan and anaerobic bacterial diseases of fish. Below are some of the more common diseases treatable with MetroPlex. Be aware that many diseases and infections share similar physical and behavioural symptoms, e.g. clamped fins, lesions, loss of appetite.
Kamoer FX-STP WiFi Continuous-Duty Peristaltic Dosing PumpBuilt specifically for aquarium applications, the Kamoer FX-STP WiFi Continuous-Duty Peristaltic Dosing Pump is designed for dosing up to 24 hours a day, 7 days a week with an adjustable flow rate setting of 1 to 120ml/min.
KAMOER FX-STP WIFI: NEW & IMPROVED FOR 2020!Ideal for Calcium Reactors, Kalk Reactors, Denitrators, & Auto Water Changes Built specifically for aquarium applications, the Kamoer FX-STP WiFi Continuous-Duty Peristaltic Dosing Pump is designed for dosing up to 24 hours a day, seven days a week. It has an adjustable flow rate so you can dose fluids (like liquid aquarium supplements) in doses as small as 1 mL per minute up to 120 mL per minute. What sets this pump apart from others is its ability to change the flow while running. The FX-STP WiFi is perfect for gradual, automatic water changes, sulfur denitrators, Kalkwasser reactors, and calcium reactors.The original FX-STP took the aquarium industry by storm in 2018 and was heralded as the best continuous-duty peristaltic dosing pump on the market. The FX-STP WiFi is the second-generation of this popular dosing pump. Kamoer has kept everything hobbyists love—the quiet operation, compact size, and reliable performance—and added some intelligent new features to make a great product even better.Our favorite upgrades from the previous generation include:
Wireless Control with Your Mobile Device
The first generation of the FX-STP Doser was controlled by turning the adjustment knob on the front of the unit. While this easy onboard control remains, you’ll now have the ability to control and monitor your FX-STP WiFi remotely using the free Kamoer Remote app for Android and Apple (iOS). See how much you are dosing, adjust dosages, check how much fluid you have left, and more with Kamoer’s free cloud services. All you’ll need is a compatible mobile device and an Internet connection.
LCD Screen Now Includes a Screensaver
The original FX-STP had a handy LCD screen to make calibration and adjustments a breeze. However, since the device is always on, screen life could diminish prematurely and leave users in the dark. Kamoer wisely added a screensaver to the FX-STP, WiFi, which dramatically increases the life expectancy of the screen. Coupled with the fact that most users will use the mobile app for status and fine-tuning, screen failure is now all but eliminated.
Same Compact Design—New All-Black Branding
The FX-STP version 1 had a colourful Kamoer logo splashed across the front. The new WiFi model has a more subtle all-black variation of the company logo, which is more complementary to the industrial black and silver exterior of the doser. Kamoer also simplified the area around the adjustment knob. They traded “Min” and “Max” text for a cleaner “-” and “+” and swapped the directional arrow for a more universally recognized volume control symbol.
Not Your Average Aquarium Dosing Pump—This is a Workhorse!
Most automatic dosing pumps in the aquarium hobby are designed for intermittent use for tasks like dosing a 2-part solution. In these sorts of low-volume applications, the doser is really only capable of running for a few minutes or maybe an hour per day. The Kamoer FX-STP WiFi is on the complete opposite end of the spectrum. Rather than occasional starts and stops, the FX-STP WiFi is built to run continuously for more demanding applications like feeding a calcium reactor, Kalk reactor, or for performing automatic water changes in your aquarium. Rather than use a DC brush-driven motor like most dosing pumps on the market, the FX-STP WiFi usings a high-precision stepper motor for astonishingly accurate dosing no matter how large or small the quantity.
Here’s What Makes the FX-STP WiFi Doser So Special:
Suitable for all sorts of continuous dosing applications
Ideal for feeding calcium reactors, Kalk reactors, and bio-denitrators
The perfect pump for building an automatic water change system
Memory Backup—your settings will be saved and restored if/when power lost
An onboard LCD display shows current pump status including flow rate and WiFi connectivity
Near-silent operation
High-precision stepper motor driver
Adjustable flow rate setting of 1 to 120ml/min
Easy to calibrate
Easy to replace tubing
Small, compact, and built tough
There is a downloadable quick-start guide plus a pump tutorial built into the app
The #1 Feed Pump for Calcium Reactors: Highest Rated & Most Reliable!If you find yourself constantly having to tune your calcium reactor, the FX-STP WiFi is for you! This pump is so unbelievably consistent that your alkalinity will barely move from test to test. Once it is dialed in, you’ll be impressed by how stable your alkalinity and other major water parameters become. Calcium reactors are supposed to make supplementing a reef aquarium easier, but many hobbyists fight their CaRx for years, trying to achieve a consistent effluent drip-rate. The FX-STP WiFi, on the other hand, makes calibration and fine-tuning a breeze. Other than occasionally replacing the tubing and recalibrating to maintain accurate dosing, this is a “set it and forget it” type of solution—which is why reef hobbyists around the globe love the FX-STP WiFi so much! It truly is the best method we know of to provide reliable and stable long-term effluent flow. The FX-STP WiFi allows aquarium keepers to overcome inconsistencies easily and set the reactor’s effluent with enough pressure and a predictable metered rate for unparalleled performance and rock-solid stability.Check Out The Detailed Specs of the FX-STP WiFi Doser:
Dimensions: 5” Tall x 3¼” Wide x 5¼” Deep
Minimum Flow Rate: 1mL / min
Maximum Flow Rate: 120 mL/min
PharMed Tubing Life: 2000 Hours
Pump Tubing Size: ⅛” ID
Mobile App: Android (Android 4.4 and above) and Apple (iOS 9.1 and above)
Power Adapter: Input 100VAC -240VAC | Output DC24V 1.9A
Pump Head: 6 Rotor / Roller KCS
Here’s What Comes Inside the Box:
1x Kamoer FX-STP WiFi Dosing Pump
1x Power Supply
2 x Tubing Adapters (⅛” to ¼”)
1 m of ⅛” ID Tubing
1 m ¼” ID Tubing
WARRANTYPet Habitat and Kamoer hereby guarantee this product to be free from defects in material and workmanship for a period of:One (1) year Warranty is activated on the date of purchase.This Standard Limited Warranty applies and is limited as follows:To the product only as long as it remains in the possession of the original purchaser.To the product that has not been subject to accident, misuse or abuse.To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than Pet Habitat.That Pet Habitat be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.That Pet Habitat shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.Under no circumstances shall Pet Habitat and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Maintain proper salinity level with greater precision and convenience. Refractometer is designed specifically to measure the absolute salinity of seawater, not brine (NaCl) for true readings essential for reef aquariums housing sensitive corals. High-resolution dual scale display (salinity in ppt and specific gravity) focuses on the range relevant for reef aquariums, eliminating confusing extraneous graduations. Dual scale range of 20-40 PPT/77°F and 1.010-1.030 S.G.
Refractometer has been calibrated for the specific ionic content of seawater according to the most advanced international laboratory standards for practical salinity measurements. High accuracy seawater refractometer features Automatic Temperature Compensation for exceptional accuracy measuring the absolute salinity of seawater at a temperature of 25°C/77°F.
Main Features
Directly reads the absolute salinity of seawater at 25°C/77°F (no need for seawater or temperature compensation factors).
Specifically designed for the ionic content of seawater (NSW) for more accurate salinity measurement (industry standard refractometers are calibrated for salt brine).
Calibrated for seawater (NSW) at 25°C/77°F, the normal temperature range for reef aquariums (most standard refractometers are calibrated at 15°C/59°F).
Easier to read, higher resolution display, focused to the relevant range for reef aquariums of up to 40ppt.
Includes Integrated Automatic Temperature Compensation (ATC) for accurate measurement at standard ambient temperature.
Did You Know?Measuring the salinity of seawater with a refractometer calibrated for brine (NaCl) solution will result in a deviation of up to 1.5 ppt!
Directions for use
Clean the glass prism and translucent flap of the refractometer with deionized (DI) water at 22-25°C and dry thoroughly with a soft cloth.
Hold the refractometer horizontally and open the flap.
Using the pipette provided, place a small sample of the seawater to be tested on the glass prism. Do not immerse the refractometer into the seawater.
Close the flap on the sample and wait for 15 seconds to allow for the temperature of the sample and the refractometer to equalize.
Point the prism end of the refractometer to a light source and look through the eyepiece. (Note: The refractive index is also dependent on the wavelength of the light source and therefore a light source close to daylight should be used.)
The top of the screen will be blue and the bottom will be clear/white. The dividing line between the blue and white sections is where the reading should be taken.
Adjust the focus for your individual eyesight by rotating the eyepiece until a sharp picture is achieved.
Read the seawater salinity in ppt and/or the equivalent specific gravity (S.G.) at 25°C.
Clean the glass prism and translucent flap of the refractometer with DI water and dry thoroughly with a soft cloth.
CalibrationAlignment should always be carried out with the instrument at 22-25°C. Allow the refractometer to stand at this temperature for 30 minutes before alignment.
Remove the cover from the alignment screw.
Place a sample of DI water on the glass prism and check the salinity reading as directed above.
If the reading is not exactly on the zero ppt mark on the scale, adjust the position of the reading by rotating the alignment screw with the screwdriver provided until the reading is zero ppt.
Replace the cover from the alignment screw.
StorageTo prevent the formation of condensation inside the refractometer, store in a dry environment.
General InformationRefractometers are optical instruments that measure the refractive index of a solution, which will vary according to its ionic composition, concentration and temperature. For accurate results, refractometers must be calibrated for the specific solution to be tested and in the correct temperature range.
Refractometer has been calibrated for the specific ionic content of seawater according to the most advanced international laboratory standards for practical salinity measurements. Measuring the salinity of seawater with a refractometer calibrated for brine (NaCl) solution will result in a deviation of up to 1.5 ppt.
Refractometer includes automatic temperature compensation. However, to avoid compensation errors, it has been calibrated at 25°C, the normal temperature range for reef aquariums. Both the ambient temperature and the water sample temperature will influence the refractive index and therefore it is recommended to use the refractometer in environments where the ambient temperature and the water to be tested are between 15-35°C.
Over time, the optical elements inside refractometers can become misaligned. Therefore, before first use and thereafter on a regular basis, the alignment of a refractometer should be checked and adjusted as necessary.
About SalinitySalinity is a general term describing the concentration of salt in water. However, solutions of different type of salts have different refractive indexes. Brine is a solution of Sodium Chloride (table salt) that contains 2 chemical elements. Seawater contains approximately 70 chemical elements that include Calcium, Magnesium, Potassium etc. in addition to the Sodium Chloride. Seawater and Brine of the same salinity (i.e. the same weight of salt/liter) have different refractive indexes and will give different salinity readings if measured on the same refractometer.
Refraction & Refractive IndexAll transparent materials such as liquids refract (distort) light. All transparent materials refract light differently and have what is called a "refractive index" which means how much a particular material distorts light. Different concentrations of the same liquid have different refractive indexes. The scale of a refractometer is calculated by using a mathematical algorithm that relates the measured refraction to its concentration for a specific liquid.
Refractive Index and TemperatureThe refractive index of liquids change with temperature and therefore has a major effect on measuring salinity with a refractometer. The algorithm for defining the PPT (and S.G.) scale for a refractometer is calculated for a specific temperature.
PPT readings from refractometers that are not calibrated for reef aquariums (i.e. 25°C) need to be adjusted according to a conversion table to give the actual PPT at the aquarium temperature. This is often a cause for misinterpretation of refractometer readings.
For example, using a seawater refractometer calibrated at 20°C will give a PPT reading that is approximately 1-1.5ppt lower than the absolute salinity of the same water sample at the normal aquarium temperature of 25°C.
Therefore, Refractometer calibrated at 25°C/77°F directly reads the absolute salinity of seawater with no need for temperature compensation factor)
ATC - Automatic Temperature CompensationTemperature is probably the biggest cause of wrong readings with a refractometer. Calibration and testing of water samples should be done after the refractometer and water sample have equalized at the correct temperature.
Automatic Temperature Compensation (ATC) compensates for a few degrees of difference between the ambient temperature and the calibrated temperature of the refractometer. Larger temperature variations will give an error of approximately 1.0ppt in the salinity reading.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea Coral Colors C is a complex of 8 “light” metals that includes Iron, Manganese, Cobalt, Copper, Aluminum, Zinc, Chrome and Nickel. These micro-elements are essential to many bio-chemical metabolic processes, including respiration, production of energy, chlorophyll and photosynthetic catalysts. C elements are related to the green/yellowchroma-proteins.Weekly dosing - Soft CoralsTest the Color Elements every week and dose each supplement to replenish back to the optimal levels.Daily dosing - SPS coralsEnsure that all of the Color Elements are at optimal values and run the aquarium for4 days at a stable salinity (compensate for evaporation daily) without adding anysupplements. At the end of the 4 days test the Color Elements and calculate the “4 day dosage” of each supplement to replenish back to the optimal levels. Add the “4 day dosage” to the system. Divide this “4 day dosage” by 4 and use as the daily dosage for the next week.After a week of adding the daily dosage, test the Color Elements and calculate the adjusting dosage of each supplement to replenish back to the optimal levels.
If the adjusting dosage is significantly different from the previous daily dosage amend (increase/decrease) the daily dosage as appropriate.
If the measured level of a specific element is above the optimal level wait for the excess of the element to be depleted before restarting the daily supplementation with the amended daily dosage.
Continue testing all of the elements every week and make adjustments to the dailydosages as required. As your corals grow or you add or remove livestock the uptake of the elements in your aquarium will gradually change. It is recommended to keep a log book of the weekly measurements and dosages.If you miss one or more days of supplementing add the complete amount that you have missed but do not exceed the maximum recommended daily increase for any of the elements.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Pack the Red Sea Filter Media Cup with filter floss, ceramic media, carbon, gfo, or any other media you want. The slots at the bottom half of the cup force water to flow down through your media before it can freely exit. With the included media bag, you can manipulate your aquarium's water to go through a wide variety of media, carbon to help remove any toxins or yellowing pigments in the water, GFO to help remove phosphates or a biological substrate like MarinePure for the added surface area. The Filter Media Cup is an ideal and cost-effective replacement to filter socks as well. If all you want is to polish the water of free-floating particles, then placing a few handfuls of a filter pad in the cup is all you need to do, merely replace the dirty pads every few days.
Replaces filter socks
Create your own custom filter tower
Works with all Red Sea Reefer & MAX systems
Compatible with most pre-made sumps
Includes media bag
Specifications:
Dimensions - 4" x 8"
Min Sock Opening - 3.5"
Capacity - 1L
Media Bag Size - 5" x 10"
What's Included?
1x Filter Media Cup
1x REEF SPEC Media Bag
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Dimensions: 4.88 x 4.88 x 1.3in
Wattage: 60W - # of LEDS: 16 (+ 1) Color Channels: 7 (+1)
A dedicated moonlight LED and the channel has been added in the new Prime HD modules
Bluetooth onboard, no more WIFI. No additional controller needed.
Utilize all current Prime Mounting Hardware including – Prime Mount, Prime Flex Arm 12”, Prime Flex Arm 18” and the Prime hanging Kit.
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Bubble Magus Automatic Sump Filter Rollers removes the need for filter socks. Water is fed into the internal chamber via the aquarium systems drain, and through the filter roll. When the water level rises in the chamber due to filter clogging the water level switch triggers the motor to wind on the filter roll to a new fresh piece. The water level will then drop repeating the process.
Specifications
12v DC motor
110v Power adapter ULc DC12v 1amp output
Water level switch
Filter roll Non woven 150mm width, 25M length
1” I.D inlet pipe, complete with Flex pipe
Internal sump mounted
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
LED BLUE
The JUWEL LED Blue lighting medium was specially developed to simulate the light conditions on coral reefs in depths of around 6 m. The special light spectrum promotes coral growth in a targeted manner.
Only suitable for MultiLux LED. Not compatible with T5 light units.
• Fascinating deep blue tone
• Promotes coral growth
• Ideally combinable with JUWEL LED Marine
LED BLUE 438 mm/12 Watt LED BLUE 590 mm/14 Watt LED BLUE 742 mm/19 Watt LED BLUE 895 mm/23 Watt LED BLUE 1047 mm/29 Watt LED BLUE 1200 mm/31 Watt
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
RedSea ReefLEDTM
Smart - Safe - Efficient
Years of research and testing are behind Red Sea’s ReefLED™ smart reef lighting system. These lights have been designed to ensure optimal coral growth and dramatic coloration, while creating a gentle shimmer throughout the aquarium.
The ReefLED lights are guaranteed to be reef-safe and REEF-SPEC® and are very easy to set up.
The built-in wi-fi connects them directly to the internet, enabling you to control them from your smartphone using Red Sea’s ReefBeat® smart aquarium app.
At the heart of the unit is a single, compact LED array that includes a multi-wavelength, 23,000 Kelvin “REEF-SPEC Blue” channel (a proprietary blend of blue, violet and ultraviolet LEDs) which, together with an 8,000K White channel, provides a reef-safe range of color temperatures that enable all corals to flourish.
In addition, a separate dedicated 3W moonlight channel provides low levels of light for reef-safe night-time viewing.
ReefLED also includes an optical-glass, hollow lens that ensures a homogenous light spectrum with ideal PAR values throughout the aquarium, without hotspots or areas with insufficient light for coral growth.
ReefLED is controlled by Red Sea’s ReefBeat app which provides a number of preset lighting programs you can choose from as well as additional features including sunrise/sunset effects, lunar cycle moon light, random clouds and even an acclimation program for new installations. ReefBeat also provides best-practice guidelines during setup as well as useful notifications to your smartphone, for example, in the event of a power outage.
Features
REEF-SPEC® light output for optimal coral growth and coloration
Homogenous light with a gentle shimmer
Reef-safe dual-channel color setting plus dedicated moonlights
ReefBeat® app for easy set-up, operation, monitoring and notifications
Anti-glare recessed lens
ReefBeat app
One interface for all of Red Sea’s smart devices.
Easy set-up and operation.
On-line monitoring and notifications.
ReefLED units recommendation
Mounting options (sold seperately)
7 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
In a reef aquarium, having the perfect amount of flow and water movement is crucial to the health of your animals, as well as the overall success of the tank. With the addition of Ecotech Marine's Mobius app compatibility, Vortech QuietDrive pumps have never been more versatile or easier to use. VorTech pumps are designed by aquarists to be the standard in wave-making technology.
Features
Mobius App Ready - No need for additional equipment to get wireless programming functionality. Connect directly to your iOS or Android device.
Create massive water movement - Adjustable flow rates with included controller allow you to dial in a setting that is tailored to your aquarium
No hot spots - With its broad flow pattern, the VorTech QuietDrive eliminates "flow hot spots"
Three-dimensional flow - A unique patented design is unrivaled in creating three-dimensional flow conditions and gyres
Comprehensive flow modes - 12 different flow modes allow you to choose the best setting for happy corals and fish
Ultra low-profile design - With its patented design, the VorTech QuietDrive is the least visually obtrusive pump on the market
Safe - No electrical components in the aquarium greatly reduces the risk of electrical shock to you or your animals.
VorTech QuietDrive Quick Compare
Pump
Mobius Ready?
Max Flow Rate
Tank Size
Maxiumum Tank Thickness
Power Consumption
MP10QD
Yes
1,500+ GPH
2.5 to 50+ gallons
0.375 inches (9.5mm)
8 to 18 watts
MP40QD
Yes
4,500+ GPH
50 to 500+ gallons
0.75 inches (19mm)
9 to 38 watts
MP60QD
Yes
7,500+ GPH
120 to 1,000+ gallons
0.375 to 1.00 inches (9.5 to 26mm)
10 to 60 watts
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Customizable DIY Aquarium Net Cover
Keep your finny friends safe inside your tank with a customizable Red Sea Aquarium Net Cover.
With a sleek profile and minimalist hangers the Red Sea Net Cover blends in seamlessly even on ultra-clear, rimless, open-top aquariums.
The extra strong aluminum frame and purpose designed components allow the extra thin transparent net cover to be customized to accommodate rim-mounted equipment such as lighting arms, auto-feeders and overflow boxes.
Check out our how-to video that shows exactly how to assemble Red Sea’s fish saver, step-by-step. Keep in mind that this is a Do-it-Yourself cover, and while it offers versatility and customizability at a fraction of the cost of custom-built covers, it does require proper DIY skills including planning, taking exact measurements and cutting aluminum profiles. So if you aren’t a DIY project kind of hobbyist, you can always ask your local dealer or a handy friend to help.
Designed specifically for rimless tanks the Red Sea cover also works well with braced tanks such as the MAX® S-series.
Main Features:
Suitable for most open-top aquariums
Extra strong, customized aluminum profiles
8mm (5/16″) thin strand, transparent netting
Inside-rim or on-rim mounting options
Includes components for one customized cut-out for filters
Components available to accommodate additional rim-mounted equipment
Includes spline roller
Contents of DIY Aquarium Net Cover Kit:
Aluminum frame sections/profiles
Internal and external frame corners
Spacers and hangers
8mm (5/16″) netting, which can be cut to size
Spline rubber for attaching the net to the frame
Spline roller for inserting the spline
Example of Red Sea REEFER™ 350 Deluxe with cutouts for overflow and LED lights
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Customizable DIY Aquarium Net Cover
Keep your finny friends safe inside your tank with a customizable Red Sea Aquarium Net Cover.
With a sleek profile and minimalist hangers the Red Sea Net Cover blends in seamlessly even on ultra-clear, rimless, open-top aquariums.
The extra strong aluminum frame and purpose designed components allow the extra thin transparent net cover to be customized to accommodate rim-mounted equipment such as lighting arms, auto-feeders and overflow boxes.
Check out our how-to video that shows exactly how to assemble Red Sea’s fish saver, step-by-step. Keep in mind that this is a Do-it-Yourself cover, and while it offers versatility and customizability at a fraction of the cost of custom-built covers, it does require proper DIY skills including planning, taking exact measurements and cutting aluminum profiles. So if you aren’t a DIY project kind of hobbyist, you can always ask your local dealer or a handy friend to help.
Designed specifically for rimless tanks the Red Sea cover also works well with braced tanks such as the MAX® S-series.
Main Features:
Suitable for most open-top aquariums
Extra strong, customized aluminum profiles
8mm (5/16″) thin strand, transparent netting
Inside-rim or on-rim mounting options
Includes components for one customized cut-out for filters
Components available to accommodate additional rim-mounted equipment
Includes spline roller
Contents of DIY Aquarium Net Cover Kit:
Aluminum frame sections/profiles
Internal and external frame corners
Spacers and hangers
8mm (5/16″) netting, which can be cut to size
Spline rubber for attaching the net to the frame
Spline roller for inserting the spline
Example of Red Sea REEFER™ 350 Deluxe with cutouts for overflow and LED lights
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
TRACE COLORS A
Iodine, Bromine and Fluorine supplement that promotes the Pink colors in corals
IODINE+ Supplement is part of the complete range of complementary major, minor and trace element complexes which together provide the needs of corals.
IODINE+ Supplement contains iodine and other halogens that are associated with many biological processes, one of them being the production of the pink pigments in the soft tissue of corals.
The halogens act both as antioxidants and oxidative agents within the soft tissue and mucus layer of corals, reducing the possibility of coral bleaching.
In active reef systems, these elements are depleted quickly due to their high oxidative abilities and reactivity with organic materials. Iodine and bromine are related to the pink chromo-protein (pocciloporin).
For best results in displaying coral colors use Red Sea’s NO3: PO4– X.
1ml will raise the iodine level of 100 liters (25 gal) by 0.03ppm
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
FOUNDATION® A
Calcium and strontium complex for balanced formation of the coral skeleton
Calcium, magnesium, strontium and carbonate are the basic foundation elements of coral skeletons.
All of these elements need to be available in balanced proportions for positive coral health and growth.
Red Sea’s CALCIUM+ contains blended salts of calcium and strontium in the ratio required by corals and is part of Red Sea’s complete Reef Care Program.
Liquid supplement: 1ml will raise the Ca level of 100 liters (25 gal) by 2ppm.
Red Sea’s Reef Mature Pro Kit provides a complete program for the biological maturation of your reef aquarium, establishing full nitrification plus nitrate and phosphate reduction in a few weeks.
Most biological ‘cycling’ products only provide the bacteria that convert toxic waste products to nitrate. Red Sea’s Reef Mature Pro Kit completes the biological maturation process by establishing thriving colonies of anoxic (de-nitrifying and phosphate harboring) bacteria as well as ensuring the necessary conditions that will promote the growth of coralline algae and other micro fauna found in live rock and within a sand bed.
By using Red Sea’s Complete Marine Care Test Kit, you can monitor all essential water parameters during maturation.
Red Sea’s Reef Mature Starter Kit includes:
Nitro Bac – A concentrated blend of nitrifying and de-nitrifying bacteria spores to seed the live rocks, substrate and the bio-media in a new tank.
Bacto-Start – A balanced blend of nitrogen and phosphorus components that simulate the natural waste products of an active aquarium, enabling a controlled development of the aerobic and anoxic bacteria.
NO3: PO4-X – A unique complex of carbons and other organic bonded elements that are used by anoxic bacteria for the accurate control of algae nutrient (nitrate and phosphate) levels. Prevents nuisance algae and enables control of zooxanthellae for optimum coral growth and coloration Read more about NO3:PO4-X >>
KH Coralline Gro – A concentrated marine buffer complex of carbonate buffers & potassium, fortified with the specific minor and trace elements,such as iron, that promote the growth of coralline algae and other beneficial micro-fauna. Read more about KH Coralline Gro >>
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
MatrixCarbon is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of macroporous binding sites. MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0. While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon has the lowest detectable leachable phosphate content of all major carbon brands tested. MatrixCarbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use.
While carbon is generally considered to be a chemical filter, that is not precisely true. It is in fact a mechanical filter as well, but it is only capable of mechanically filtering objects of molecular size. It functions through extremely small cracks and crevices, called macropores and micropores. Microporous carbons remove primarily metals and smaller ions (like trace minerals) and are best suited to air filtration, while macroporous carbons remove primarily larger organic molecules (like nitrogenous waste) and are best suited to water filtration.
The ingredients from which a carbon is manufactured determine whether it will be macro- or microporous. Carbons made from coconut shell and other organic products form microporous carbons, while carbons made from bituminous coal form macroporous carbons. MatrixCarbon is a bituminous coal-based, macroporous carbon. It is the only spherical carbon on the market, allowing for maximum water flow. It is sized to allow full penetration by water, but not small enough to escape filter bags. All carbons contain phosphate. However, that phosphate DOES NOT come from washing the carbon with phosphoric acid. Most carbons are washed with sulfuric acid. The phosphate is contained in the ash from the carbon source. The main purpose of acid-washing is to remove ash. Because of MatrixCarbon's hydrodynamic properties, more ash is washed from our carbon than any other. Therefore, it has the lowest leachable phosphate on the market.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
AmGuard safely, rapidly and efficiently detoxifies toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn't degrade for nearly 72 hours. That's at least twice as long as our competitors products. Unlike competing products, AmGuard converts it into a safe, non-toxic form that is readily removed by the tanks biofilter. It does not alter pH.
Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability® and Matrix. Use Ammonia Alert® or MultiTest Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard also removes chlorine and chloramines.
20 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Fiji Pink Reef Sand: 0.5-1.0 mm diameter grain size. A gently hued aragonite, CaribSea Seaflor Pink Fiji Reef Sand is ideal for plenum systems, nitrate reduction systems and most fish and reef tanks. Helps achieve the pH of natural seawater. Proves calcium and other essential trace elements like strontium and magnesium.
CaribSea Aragonite buffers to the highest pH and delivers more calcium, carbonate, and trace elements than any other substrate. Little or no rinsing required, aragonite keeps aquariums healthier, longer.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Reef Pulse, a high quality coral food powder, is an innovative blend of selected zooplankton and phytoplankton catering to the unique nutritional needs of many SPS and LPS coral species, tube worms and other omnivorous filter feeders. The wide particle size range from 5 to 400 micron makes it an ideal diet for a large variety of coral species (like Euphyllia, Acropora, Montipora, Clavularia, Goniopora, Zoanthids, Scolymia, Dendronephthya, Stylophora, Pocillopora, Seriatopora, Xenia, Anthelia, Echinopora, Alveopora, Leptastrea, Chalice,…). They will show faster growth and more intense coloration, when fed regularly with Reef Pulse. Reef Pulse can be used with 2 different feeding methods: target feeding or tank feeding, according to the following feeding instructions. Target feeding = Fill a recipient with 100ml of tank water and add, depending on coral density, ¼ to 1 teaspoon of Reef Pulse. Do not feed more than 1 teaspoon per 400 liter per day / Blend & stir well / Switch off filtration, skimmer and circulation during target feeding (to avoid immediate removal) / Disperse a cloud of concentrated food solution over the targeted corals (e.g. by using a pipet or syringe) / When the food is consumed, restart filtration, skimmer and circulation Tank feeding = Fill a recipient with 500ml of tank water and add, depending on coral density, ¼ to 1 teaspoon of Reef Pulse per 400 liter of tank water. Do not feed more than 1 teaspoon per 400 liter per day. / Blend & stir well / Switch off filtration and skimmer (to avoid immediate removal) / Add the food solution to the aquarium, circulation pumps will disperse the food / Restart filtration and skimmer +/- 10 to 15 minutes later (depending on how fast the food is consumed)
The power food for SPS/LPS corals and a nutritional boost for your reef tank.
Palatable micro particles providing all essential nutrients.
Includes protein stimulants to trigger the feeding behaviour in SPS and LPS corals.
With highly digestible marine proteins and free amino acids, the building blocks for reef organisms.
![Tank Net Screen Cut Outs 15/40mm [1 of each]](//www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_5b5431aa-6d5b-4dec-8419-323a1e6e2012.png?v=1591118145&width=645)
![Tank Net Screen 48"/120cm [Incl. 1 Univeral cut out]](//www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_37dc6e6c-6819-48ac-a250-4a774d4b9592.png?v=1591118138&width=645)
![Tank Net Screen Cut Outs 15/40mm [1 of each]](http://www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_5b5431aa-6d5b-4dec-8419-323a1e6e2012.png?v=1591118145&width=645)
![Tank Net Screen 48"/120cm [Incl. 1 Univeral cut out]](http://www.dorrypets.co.za/cdn/shop/products/MAX_S_738_png_37dc6e6c-6819-48ac-a250-4a774d4b9592.png?v=1591118138&width=645)
