3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Neptune Systems COR-15 is an intelligent return pump, which can be connected to your Apex System via a 1LINK port. This could be one of the 1LINK ports on your Energy Bar 632 or on the separate 1LINK module. The return pump is by far the most important piece of equipment on your aquarium. It circulates the water which is basically the life-blood of a tank. The COR-15 pumps are compatible with all Apex systems.
3 Metre 4-pin 1 link male-to-male cable.
100w Power Supply and Power Cord.
1-1/4’’ PVC Union (COR Pump Output).
1-1/4’’ Threaded x 3/4’’ Slip Fitting (Optional Hard Pluming Output).
1-1/2’’ Threaded x 1’’ Slip Fitting (Optional Hard Plumbed External Piping).
O-rings for each fitting.
5mm hex wrench At a Glance: Maximum flow rate of up to 5,700 litres/hour Whisper-drive technology.
No More Manual Topping Off
Leave Home for Days without Worry
Stop Lugging Buckets and Jugs
Maintain Consistent Salinity Levels
3 Layers of Disaster Prevention
Installs in less than 5 minutes!
Standalone or Apex-connected
SAFETY MADE SIMPLE
The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation.
The new aquarium hobbyist has many challenges, but none is more annoying than the chore of adding water, every day, to make up for that lost to evaporation (a.k.a. topping off/up). This alone usually makes the automatic top-off (ATO) device the first piece of automation equipment purchased.
The ironic flip side of this decision is that a faulty ATO device is one of the leading reasons for catastrophic aquarium failure, or even worse, flooding of the house or business.
Not all ATO devices are created equal. Sadly, many ATO on the market are made with cheap components, have very little protection against these catastrophes, and are just a nightmare to assemble and install correctly.
An ATO does not have to be both a blessing and a curse!
We designed our ATK – Automatic Top-Off Kit to not only be super-simple to install and use, but it is unique in the market as an ATO device with three layers of redundant monitoring and water-level control. The ATK does the work for you, while at the same time protecting your tank and your home.
The Neptune Systems DŌS is a highly efficient, programmable dosing system designed to work seamlessly with the Neptune Systems Apex Controllers. Ideal for a variety of dosing applications, it offers precise control over dosing volumes and schedules through the easy-to-use Apex Fusion cloud interface. The DŌS pump features dual pump heads, large-diameter tubing for less wear and quieter operation, and simple maintenance with easy tube replacement. It's a practical solution for accurate and consistent aquarium dosing, minimising manual work and maximising reliability.
What Can the DŌS be Used For?
Two-Part Dosing: The most common use for the DŌS is dosing calcium and alkalinity to your system. Using a dosing pump to add these elements means greater stability of important water parameters and less daily maintenance. Simply run the DŌS Additive Dosing task in Apex Fusion and enter the amount of liquid you'd like to dose and when you'd like for it to be dosed. The DŌS then sets up all the dosing intervals within that time period. It even automatically chooses the slowest speed necessary for the pump so that it minimizes noise.
Automatic Water Changes: Water changes with the DŌS have never been easier. All you do is run tubing to your empty vessel or drain and to your fresh stock of saltwater. Then, in Apex Fusion, select and run the DŌS Automatic Water Change task and you'll be up and running in a matter of minutes. It will perform an automatic water change for you based on the schedule you've set up. If you have optical sensors, you can even set up alerts when your fresh saltwater container is running low.
Micro Dosing: If you need to dose tiny amounts liquid (like vodka dosing or for Zeovit systems), the DŌS is the perfect solution due to its precision-controlled stepper motor. This ability to control pump movement in such a refined manner means that you can dose as little as 0.1ml at a time.
Easy Maintenance and Tubing Changes
Changing out the pump head on the DŌS is a snap...Literally! All you need to do to change out the pump head is squeeze and remove. Then attach your dosing tubing to the new head, and snap it back on. No screws, no fuss.
DDR Compatible (sold separately)
The DOS has an accessory port that will enable it to be connected to the DDR-DOS Dual Reservoir. The DDR has two storage vessels that hold up to 2 liters each, with an optical sensor in each side to let you know when you're running low on dosing solution. Note: alcohol-based products should not be stored in the DDR.
Features
Easy Setup via the Apex Fusion Interface
Great for Two-Part Dosing or Automatic Water Changes
Precision Dosing with Flow Rates from 0.1mL to 250mL/min
Easy-to-Replace Dosing Heads
Specifications
Size (Approx.): 9.5″ x 5″ x 5″
Weight (Approx.): 4 pounds
Lift Height: 24 feet (minimum at MSL)
Suction Height: 24 feet
Flow Rate: Variable (0.1mL – 250mL/min)
Power Requirement: 110/120V or 220/24oV
Requires an Apex Controller to operate
What's Included?
DŌS pump
AquaBus cable
Power supply
4 meters DŌS tubing
Neptune Systems A3 Apex Pro System -- The most complete experience of monitoring and control for the discerning aquarist
Fully equipped A3 Apex Pro base unit
4 FMM Ports
4-Channels 0-10V Variable output
6 Switch Digital Input
2 Aquabus Ports
2 pH/ORP probe ports
1 Salinity* probe port
1 Temperature probe port
Both WiFi & Ethernet compatible
Soft-touch finish
New built-in audible alarm
Control up to 13 individual power connections with the Energy Bar 832
ONLY power bar on the market to be ETL/UL certified specifically for aquarium use
8x 120 VAC outlets
3x 1LINK outputs for WAV, DOS, etc
2x DC24V outputs for accessories (small pumps, solenoids, fans, etc.)
3x AquaBus Ports
Track temperature, ORP, and pH with included lab-grade, double-junction probes
Continuous monitoring of water-level depth with new Liquid Level Sensor
Reliable and reusable new Optical Multi-Surface Leak Detection Sensor
Set reminders, log testing and dosing information, and access your tank from anywhere with Apex Fusion
THE APEX ECOSPHERE-- LESS HASSLE, MORE SUCCESS
Built in WiFi, key parameter monitoring, and reliable equipment control. Prevent catastrophes, take corrective actions, and receive alerts to your smart phone when things go awry. Set reminders, log testing and dosing information, and keep tabs on your aquarium from anywhere in the world. All this and more is possible with the Neptune Apex Controller System!
The Apex's included WiFi allows you to connect to the free Fusion Cloud interface, where you can do everything from calibrating probes to customizing outlets with just a few taps. Fusion also gives you the ability to monitor and control your Apex from anywhere and on nearly every device platform – computer, tablet, or smart phone – Windows, OSX, iOS, or Android.
The Fusion interface has a user-friendly design sure to create a headache-free command center for all your aquarium automation needs. Its drag and drop interface allows you to toggle control switches, graphs, video tiles and more to your dashboard, allowing for easy customization that is focused on your individual monitoring needs. Being that the Fusion is a web-based application, you will never have to endure the rigmarole of endless app updates, clumsy touch screens, or complicated drivers to install. Whenever you open the interface, you are always running the most current version of the software. Set up and configuration is streamlined with an easy-to-follow guided user interface.
Included with the Apex Pro and standard Apex Controller Systems is the Energy Bar 832-- the power control hub to rule them all. They are the only UL-certified power bars approved for use in aquarium applications. Each of the eight individual outlets has independent power consumption monitoring with its own LED indicator status display, and the power supply feeds an additional three built-in 1LINK ports as well as two 24VDC accessory ports. Now you can connect additional Neptune accessories like the DOS and WAV pump directly to the Energy Bar 832, saving room and eliminating messy cords around your aquarium.
A3 Apex Pro Base Unit
The A3 Apex Pro is the most complete and comprehensive aquarium monitoring system in the Neptune ecosphere. If you're serious about having complete control over your tank, then look no further. From key parameters like temperature and ORP to water level depth and individual equipment power monitoring, the Apex Pro does it all, and now with a new soft-touch finish and built-in audible alarm. The Apex Pro includes four FMM ports for connecting all fluid monitoring sensors-- no separate module purchase necessary!
Energy Bar 832
The most comprehensive aquarium controlling and monitoring system to date is finally here. The Energy Bar 832 now has eight individual, 7 amp relayed outlets letting you use any outlet for any device. Each individual outlet can also monitor and detect power usage in amps or watts, letting you set alarms and send emails when pumps have clogged or failed, lights are not turning on, heaters leaking current, letting you be notified of the issue before it becomes a problem. With electricity costing more and more money per Kilowatt hour having the ability to monitor each pump, heater, and light lets you now make better decisions on the overall value of your equipment.
Each Energy Bar 832 also has two 24VDC accessory ports that can power small pumps, solenoids, fans and more, while the built-in 100W DC power supply lets you control up to 3 1Link accessories like the WAV circulation pumps, and DOS fluid metering system without the need for any additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless.
Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug in almost anything you want, where you want.
*NEW* LLS Liquid Level Sensor
The Neptune LLS is a first of its kind industry exclusive! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one continuous vertical sensor that can identify the exact depth of a liquid in both inches and centimeters at any given time. This increased sensitivity in measurement can help you identify and be alerted of changes in evaporation, consumption, and dosing levels within sumps, ATO reservoirs, AIO tanks, dosing containers, mixing stations, and more. The Apex can then be set to send alerts or to take action whenever the liquid level changes by a specified amount. All measurements are shown in both digital and animated visual readouts in the app, allowing you to track your liquid level over time. The opportunities and potential uses for this new sensor technology are endless for automating and optimizing your aquarium system.
*NEW* LD-3 Optical Multi-Surface Leak Sensor
Neptune's LD-3 Multi-Surface Optical Leak Sensor marks a significant improvement over its analog counterpart, the LD-2 Solid Surface Leak Detection Probe While the LD-2 utilizes conductive strips to detect fluid leaks on surfaces around your aquarium, the LD-3 takes advantage of optical sensor technology instead. This shift in sensor technology gives the LD-3 two distinct advantages over the LD-2:
Reusable and resistant to corrosion. The LD-3 sensor can be reused after contact with water. Unlike the conductive strips of the LD-2 which are prone to corrosion from contact with saltwater, the LD-3's epoxy-coated optical sensors can continue to provide long-lasting leak detection after repeated contact with saltwater & with no risk of corrosion!
Multi-surface applications with no false alarms. The conductive strips used on the LD-2 can sometimes give a false alarm when placed on metallic surfaces. With its optical sensor, the LD-3 can effectively be used on any surface material type, including metal and epoxied cement, without the risk of triggering false alarms.
Lab Grade, Double Junction Probes
The Apex Pro system includes high-quality probes for monitoring your tank's temperature, pH, and ORP. Calibration is a quick and simple process via the app dashboard, which will automatically recognize when your readings have stabilized and letting you know when to move to the next step-- no more guesswork and reading RAW data. In addition, the double junction pH and ORP probes will allow your readings to stay more stable without the need to calibrate as often.
Backwards Compatible
If you have any old modules, head units, energy bars, or other Apex accessories they will work flawlessly with the new Apex Controller.
Dimensions
Head Unit - 4.75" L x 5.25" H x 3.25" W
Energy Bar 832 - 10" L x 6.5" H x 2.25" W
A3 Apex Pro Bundle Includes:
1x A3 Apex Pro Base Unit
1x EB832 Energy Bar 832
1x Temperature Probe
1x PH Probe
1x ORP Probe
1x 15" LLS Liquid Level Sensor
1x LD-3 Optical Multi-Surface Leak Sensor
1x 6' Aquabus Cable
Calibration Solutions (7 & 10)
Mounting Screws
Getting Started Card
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Neptune Systems A3 Apex Jr System -- Get the essential monitoring you need now, expand into control later
A3 Apex Jr base unit
2 FMM Ports
2 Aquabus Ports
1 pH probe port
1 Temperature probe port
WiFi compatible only (no Ethernet port)
New built-in audible alarm
Expandable
Track temperature and pH with included lab-grade, double-junction probes
Monitor water level with new MOS Magnetic Optical Sensor
Stay on top of leaks with LD-2 Leak Detection Floor Sensor
Set reminders, log testing and dosing information, and access your tank from anywhere
Affordable entry into Apex ecosystem with ability to add-on/expand as you see fit
THE APEX ECOSPHERE-- LESS HASSLE, MORE SUCCESS
Built in WiFi, key parameter monitoring, and reliable equipment control. Prevent catastrophes, take corrective actions, and receive alerts to your smart phone when things go awry. Set reminders, log testing and dosing information, and keep tabs on your aquarium from anywhere in the world. All this and more is possible with the Neptune Apex Controller System!
The Apex's included WiFi allows you to connect to the free Fusion Cloud interface, where you can do everything from calibrating probes to customizing outlets with just a few taps. Fusion also gives you the ability to monitor and control your Apex from anywhere and on nearly every device platform – computer, tablet, or smart phone – Windows, OSX, iOS, or Android.
The Fusion interface has a user-friendly design sure to create a headache-free command center for all your aquarium automation needs. Its drag and drop interface allows you to toggle control switches, graphs, video tiles and more to your dashboard, allowing for easy customization that is focused on your individual monitoring needs. Being that the Fusion is a web-based application, you will never have to endure the rigmarole of endless app updates, clumsy touch screens, or complicated drivers to install. Whenever you open the interface, you are always running the most current version of the software. Set up and configuration is streamlined with an easy-to-follow guided user interface.
A3 Apex Jr Base Unit
The A3 Apex Jr is an affordable, entry level monitoring-only solution that keeps tabs on only your most essential tank needs. Track temperature, pH, water level, and floor leaks while keeping the door open to further monitoring and control options down the line.
The Apex Jr features two AquaBus ports that will allow you to connect to additional modules and accessories to continue building out your control system. Want to add Salinity monitoring? Just connect a PM2 module. Need Dissolved O2 monitoring? Simply add a PM3. How about control and monitoring of pumps, lights, and other equipment? Snag an EB832 Power Bar. The opportunities for expansion are endless.
*NEW* MOS Magnetic Optical Sensor
The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into tighter spaces and helps to prevent water incursion into the sensor. The MOS plugs into an Apex FMM port and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more. The sensors can be mounted on any type of reservoir that has up to 1/4" thick walls.
LD-2 Surface Leak Detection Sensor
Neptune's LD-2 is a full sized leak detection probe perfect for inside your stand, on hard floors, on top of skimmer cups, or any other flat surface where an overflow may cause issues. If water ever touches the sensor, your Apex Controller will be instantly notified so you can take corrective action and avoid disaster.
Lab Grade, Double Junction Probes
The Apex system includes high-quality probes for monitoring your tank's temperature and pH. Calibration is a quick and simple process via the app dashboard, which will automatically recognize when your readings have stabilized and letting you know when to move to the next step-- no more guesswork and reading RAW data. In addition, the double junction pH probe will allow your readings to stay more stable without the need to calibrate as often.
A3 Apex Bundle Includes:
1x A3 Apex Jr Base Unit
1x Power Supply
1x Temperature Probe
1x PH Probe
1x MOS Magnetic Optical Sensor
1x LD-2 Leak Detection Sensor
Calibration Solutions (7 & 10)
Mounting Screws
Getting Started Card
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Neptune Systems A3 Apex System -- The control you want, monitoring you need, and with room to grow for the everyday hobbyist
A3 Apex base unit
3 FMM Ports
6 Switch Digital Input
2 Aquabus Ports
1 pH/ORP* probe port
1 Temperature probe port
Both WiFi & Ethernet compatible
New built-in audible alarm
Expandable
Control up to 13 individual power connections with the Energy Bar 832
ONLY power bar on the market to be ETL/UL certified specifically for aquarium use
8x 120 VAC outlets
3x 1LINK outputs for WAV, DOS, etc.
2x DC24V outputs for accessories (small pumps, solenoids, fans, etc.)
3x AquaBus Ports
Track temperature and pH with included lab-grade, double-junction probes
Monitor water level with new MOS Magnetic Optical Sensor
Stay on top of leaks with LD-2 Leak Detection Floor Sensor
Set reminders, log testing and dosing information, and access your tank from anywhere with Apex Fusion
THE APEX ECOSPHERE-- LESS HASSLE, MORE SUCCESS
Built in WiFi, key parameter monitoring, and reliable equipment control. Prevent catastrophes, take corrective actions, and receive alerts to your smart phone when things go awry. Set reminders, log testing and dosing information, and keep tabs on your aquarium from anywhere in the world. All this and more is possible with the Neptune Apex Controller System!
The Apex's included WiFi allows you to connect to the free Fusion Cloud interface, where you can do everything from calibrating probes to customizing outlets with just a few taps. Fusion also gives you the ability to monitor and control your Apex from anywhere and on nearly every device platform – computer, tablet, or smart phone – Windows, OSX, iOS, or Android.
The Fusion interface has a user-friendly design sure to create a headache-free command center for all your aquarium automation needs. Its drag and drop interface allows you to toggle control switches, graphs, video tiles and more to your dashboard, allowing for easy customization that is focused on your individual monitoring needs. Being that the Fusion is a web-based application, you will never have to endure the rigmarole of endless app updates, clumsy touch screens, or complicated drivers to install. Whenever you open the interface, you are always running the most current version of the software. Set up and configuration is streamlined with an easy-to-follow guided user interface.
Included with the Apex Controller System is the Energy Bar 832-- the power control hub to rule them all. They are the only UL-certified power bars approved for use in aquarium applications. Each of the eight individual outlets has independent power consumption monitoring with its own LED indicator status display, and the power supply feeds an additional three built-in 1LINK ports as well as two 24VDC accessory ports. Now you can connect additional Neptune accessories like the DOS and WAV pump directly to the Energy Bar 832, saving room and eliminating messy cords around your aquarium.
A3 Apex Base Unit
The A3 Apex is a great entry into gaining full control over your tank, giving you everything you need to get up and running at an affordable price. Monitor temperature, pH, surface leaks, and water level with the ability to control additional aquarium equipment with the included EB832. The A3 Series Apex base unit includes a built-in audible alarm and three FMM ports for connecting all fluid monitoring sensors, an upgrade from the A2 Series which required a separate module purchase.
Energy Bar 832
The most comprehensive aquarium controlling and monitoring system to date is finally here. The Energy Bar 832 now has eight individual, 7 amp relayed outlets letting you use any outlet for any device. Each individual outlet can also monitor and detect power usage in amps or watts, letting you set alarms and send emails when pumps have clogged or failed, lights are not turning on, heaters leaking current, letting you be notified of the issue before it becomes a problem. With electricity costing more and more money per Kilowatt hour having the ability to monitor each pump, heater, and light lets you now make better decisions on the overall value of your equipment.
Each Energy Bar 832 also has two 24VDC accessory ports that can power small pumps, solenoids, fans and more, while the built-in 100W DC power supply lets you control up to 3 1Link accessories like the WAV circulation pumps, and DOS fluid metering system without the need for any additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless.
Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug in almost anything you want, where you want.
*NEW* MOS Magnetic Optical Sensor
The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into tighter spaces and helps to prevent water incursion into the sensor. The MOS plugs into an Apex FMM port and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more. The sensors can be mounted on any type of reservoir that has up to 1/4" thick walls.
LD-2 Surface Leak Detection Sensor
Neptune's LD-2 is a full sized leak detection probe perfect for inside your stand, on hard floors, on top of skimmer cups, or any other flat surface where an overflow may cause issues. If water ever touches the sensor, your Apex Controller will be instantly notified so you can take corrective action and avoid disaster.
Lab Grade, Double Junction Probes
The Apex system includes high-quality probes for monitoring your tank's temperature and pH. Calibration is a quick and simple process via the app dashboard, which will automatically recognize when your readings have stabilized and letting you know when to move to the next step-- no more guesswork and reading RAW data. In addition, the double junction pH probe will allow your readings to stay more stable without the need to calibrate as often.
Backwards Compatible and Easily Expandable
If you have any old modules, head units, energy bars, or other Apex accessories they will work flawlessly with the new Apex Controller. Want to add Salinity monitoring? Just connect a PM2 module. Need Dissolved O2 monitoring? Simply add a PM3 . The Neptune Systems Apex is expandable and compatible, making it the ultimate reef tank aquarium controller.
Dimension
Head Unit - 4.75" L x 5.25" H x 3.25" W
Energy Bar 832 - 10" L x 6.5" H x 2.25" W
A3 Apex Bundle Includes:
1x A3 Apex Base Unit
1x EB832 Energy Bar 832
1x Temperature Probe
1x PH Probe
1x MOS Magnetic Optical Sensor
1x LD-2 Leak Detection Sensor
1x 6' Aquabus Cable
Calibration Solutions (7 & 10)
Mounting Screws
Getting Started Card
16 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
biogen™ is a carbon-based biopolymer (PHA) designed to reduce nitrate and phosphate. In a fluidized bed reactor, it will support the growth of bacteria that consume nitrate and phosphate over 10% more efficiently than the leading competitor. Reducing phosphate and nitrate can enhance coral coloration and reduce nuisance coatings of rock and decorations.
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Iodide is a critical element for the health and formation of soft tissue in invertebrates (such as gorgonians, sarcophytons, etc). It has also been shown to be critical for the development of pigments in corals, corallimorpharia, and anemones, both the golden brown of zooxanthellae and the green and red colors of accessory pigments.
Most iodide supplements on the market are simply potassium iodide. When added to an aquarium environment, iodide becomes unstable converting to elemental iodine (which is biocidal) and iodate (which is useless to corals, toxic at elevated levels, and can't be tested for). Iodide is the only form of iodine available to corals for uptake. Because of this instability, iodide must be stabilized for aquarium use.
vibrance™ is a highly concentrated (10,000 mg/L) naturally stabilized potassium iodide source for reef aquaria that will restore and maintain iodide levels to those found in natural sea water. Our proprietary stabilization process makes vibrance™ the most stable iodide supplement available. It's also the most concentrated and comes with a pipette for precision dosing. It is formulated to provide a safe source of iodide that will not convert to toxic free iodine under storage or reef conditions.
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
4000gph max flow
Perfect for tanks 80-500+ Gallons!
Glass thickness up to .79" (20.07mm)
Onboard driver-level control
All Nero flow and control modes:
Constant
Pulse
Random
Schedule
App control and programmability with:
MyAi
Mobius
Smart, Powerful, & Compact
Like the Nero 3 & 5, the Nero 7 utilizes an innovative propeller design that creates an adjustable broad flow that is both strong and gentle. The Nero 7 pushes water in a wide pattern that can move foods, detritus, or other free-floating particles around without blasting corals directly. Powerheads have many different uses around a reef tank, but the main goal is to produce enough flow to keep low-flow spots from forming in your tank and help elevate detritus to be sucked into the filtration.
Control
Controllable via Bluetooth, simply open the MyAI or Mobius app, choose a mode, and control the flow in your aquarium. Different flow modes let you choose what is right for your tank inhabitants. Create a full-blown daily schedule that cycles through different modes and settings or let the Nero 7 randomize itself with the Random mode.No smart device? No Problem! The included controller only has one button but is very powerful. Pressing or holding the button for different lengths of time can change the speed, mode, or turn the pump off or on without having to open the app.
Flow Modes
Random - The Nero 7 will randomly change its flow rate throughout the day simulating a high-energy reef environment.
Pulse - Used to create a standing wave in your aquarium. The pulse interval and max flow rate can be changed based on the needs of your aquarium. Pulse is a great method for lifting settled detritus from hard-to-reach areas.
Constant - Set the appropriate flow rate and the Nero 7 will keep flowing at that speed until you change the mode or flow.
Schedule - Using the MyAI or Mobius app, create a schedule that can utilize multiple different flow modes.
Feed - Just hold the driver button for 2-5 seconds to put the Nero 7 into feed mode for 10 minutes.
All-Off - Hold the driver button for 6 or more seconds to turn the pump off. Touching the button again will restart the pump.
Magnetic Mounting
The included magnetic mounting system makes installing the Nero 7 effortless. Giving around 15° of movement, you can direct the flow where your tank needs it most. The two-part mounting system incorporates an inner magnet and an outer magnet that can couple together through 0.79" of glass or less, and the pump then sits into the beveled inner magnet for an isolated and quiet mounting system.
Included Fish Guard
The fish guard offers more safety to slow-swimming and curious inhabitants.
What's Included:
AI Nero 7 Pump with Integrated Driver
Mounting Magnets
Fish Guard
Power Adapter
Nero Guard
Quick Start Guide
Mounting Hardware
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Small, Powerful, and Smart!
Up to 3,000gph – A tankload of flow from a small in-tank footprint.
Painless Setup – Just connect and go, it’s as simple as that.
Smart Control – Easily create a schedule that fits your tank’s needs.
Multiple Pump Modes – Includes Random, Pulse, Constant and Schedule
Adjustable Flow Angle – Pump can be angled up to 15 degrees
Aqua Illumination's Nero 5 creates an adjustable broad flow that is strong but gentle at the same time. Traditional propeller designs produce a hard stream that can irritate corals where the Nero 5's innovative propeller pushes water in a wide pattern that can move foods, detritus, or other free-floating particles around without blasting corals directly. Powerheads have many different uses around a reef tank, but the main goal is to produce enough flow to keep low-flow spots from forming in your tank and help elevate detritus to be sucked into the filtration. With BlueTooth LE technology you can set the pump up into different modes, or create a daily schedule to change the flow up throughout the day.
Whisper Quiet
Controllable
Efficient
Compact Design
Broad Flow
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Small, Powerful, and Smart!
Max Flow - 2000 GPH
The Nero pump you know and love, now in a smaller form factor. Aqua Illumination's Nero 3 creates an adjustable broad flow that is strong but gentle at the same time. Traditional propeller designs produce a hard stream that can irritate corals where the Nero 3's innovative propeller pushes water in a wide pattern that can move foods, detritus, or other free-floating particles around without blasting corals directly. Powerheads have many different uses around a reef tank, but the main goal is to produce enough flow to keep low-flow spots from forming in your tank and help elevate detritus to be sucked into the filtration. With BlueTooth LE technology you can set the pump up into different modes, or create a daily schedule to change the flow up throughout the day.
Features
Whisper Quiet
Controllable
Efficient
Compact Design
Broad Flow
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Self-LevelingThe Self-leveling feature is activated whenever the wetness of the foam in the neck exceeds the user-adjusted “over-skim” threshold. The intensity of the pump is immediately reduced to prevent the over-skim and then gradually increased or decreased, a bit at a time, according to the foam wetness, until the preset pump intensity is reached and stable skimming is restored.
Optimal waste removalThe REEFER DC Skimmer features a combination of self-leveling tech, a PSK DC pump, proportionally sized venturi, a bubble diffuser and reaction body that optimizes air-water contact time.
Optimal air/water ratio and contact timeThe diffusion chamber evenly disperses the fine bubbles created by the PSK DC pump across the skimmer cone, without reducing air or water flow.
Sensor to pumpThe REEFER DC Skimmers come with a dual-action solid-state sensor that monitors foam wetness and waste level, allowing the ReefRun Dual Controller to regulate the DC Pump accordingly.
QuietThe REEFER DC Skimmers are exceptionally quiet due to the PSK DC Pump, rubber connectors and an air intake silencer.
Features
Dual Controller - Connect both a REEFER DC Skimmer and a ReefRun DC Pump to your ReefRun Dual Controller
Self-Leveling - Prevents over-skimming by monitoring foam wetness and regulating the pump’s intensity, while maintaining maximal water and air flow at all times.
Quick Actions - The Reefer DC skimmer can be integrated into ReefBeat, allowing for customized Feed, Maintenance and Emergency mode Quick Actions.
Schedule - Allows you to set a customized daily schedule of active and inactive skimming periods.
Peace of mind - Receive notifications when it is time to empty the collection cup or if the skimmer pump malfunctions.
The REEFER DC Skimmer is run via the ReefRun Dual Controller which is sold separately as it can also operate the ReefRun DC return pump at the same time! Combine them into your ReefBeat eco-system for more efficient reef-keeping.
Ratings
System
RSK DC - 300
RSK DC - 600
RSK DC - 900
SPS (L/Gal)
300 / 80
600 / 160
900 / 240
Mixed Reef (L / Gal)
600 / 160
1200 / 320
1800 / 500
Fish Only (L / Gal)
900 / 240
1800 / 500
2700 / 740
Specs
Reefer DC Skimmer 300
Reefer DC Skimmer 600
Reefer DC Skimmer 900
Height
53 cm / 21”
56 cm / 22”
59 cm / 23”
Sicce pump
PSK DC-1200
PSK DC-1200
PSK DC-1200
Air flow (Lph/Gph)
500/130
750/195
900/235
Water flow (Lph/Gph)
1000/265
1500/400
2000/530
Recommended water height
16-20 cm / 6-8”
18-20 cm / 7-8”
20-24 cm / 8-9”
Power consumption
20 W
25 W
30 W
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Are you ready to streamline your aquarium organization system? With Red Sea’s new Slide-Out Control Panels, you can have all of your reef monitoring and maintenance devices mounted into one single, easy-to-access location. Affix the panel to either the left or right side of your aquarium cabinet and enjoy easy sliding access to your equipment. Constructed from marine-spec laminated plywood and stainless steel, these Control Panels are perfect for any Red Sea REEFER aquarium setup. Available in two distinct sizes to accommodate a wide variety of REEFER cabinet models.
Features
Can mount on either left or right side of cabinet
Marine-spec 0.8: thick laminated plywood panel
Quick-release stainless steel soft close sliders
Mounting brackets provide 1.2” clearance for door hinges
Two Sizes Available
Control Panel 25 - Fits all Red Sea REEFER Aquarium Cabinets (except NANO)
Control Panel 60 - Fits only Red Sea REEFER XL & Above
Model Comparison
Model
Dimensions
Min. Cabinet Internal Depth
Control Panel 25
9.8” x 17.7” x 0.8”
(25cm x 45cm x 2cm)
18.1” (46cm)
Control Panel 60
23.6” x 19.7” x 0.8”
(60cm x 50cm x 2cm)
20” (51cm)
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Reliable, Controllable, and ReefBeat app ready!
Integrates with Red Sea's ReefBeat app
Run-dry & disconnection notifications
Customized feed, maintenance, and emergency modes
Quiet & energy-efficient
5-year warranty
Based on the wildly successful and reliable Sicce platform, the Red Sea ReefRun pumps feature a familiar look and feel, but with some big upgrades. In addition to being able to set the daily flow schedule and activate feed modes, you'll also get notifications if your pump is running dry, disconnects, or is otherwise malfunctioning, allowing you to quickly fix the problem and get everything back up and running without missing a beat. The ReefRun Controller (sold separately) can run two ReefRun pumps, meaning that you can run a dual ReefRun return system or ReefRun pump + ReefRun skimmer pump without purchasing a second controller.
Multiple Modes:Constant Flow: Perfect for a return pump where you want a steady flow rate 24/7Feed Mode: Easily turn the pump down or off completely when you want to feed your tank inhabitantsWave Maker: Schedule varied flow throughout the day for closed loop systemsCustom: Create your own flow pattern to best meet your needs
Specifications:
Flow Rate: 800 - 1900 GPHOutput: 1" - 1 1/4" Stepped Barb or Connector for 3/4" or 1" PVCMax Head Height: 16.5 ftWattage: 20-65WPower Cable Length: 10 ftPump Connection Cable Length: 3.3 ft
What's in the Box
ReefRun 7000 PumpPower SupplyConnection CablesPump output fittings
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
A paramount factor in the proper maintenance of an aquarium is the dilution of accumulated waste by scheduled water changes. This requires the removal of chlorine or chloramine or both from the new water. With the advent of chloramine, thiosulfate has proven inadequate, causing the release of ammonia. At acid or neutral pH, this is not of serious consequence. However, at alkaline pH it can be devastating, particularly if the tap water is heavily treated with chloramines.
alpha™ is a concentrated conditioner for saltwater. It is 50% more active than our Prime® and 375% more active than the next closest competitor. alpha™ removes chlorine, chloramine and ammonia. It converts ammonia into a safe, non-toxic form that is readily utilized by beneficial bacteria and reef inhabitants such as clams. alpha™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. alpha™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. alpha™ also promotes the production and regeneration of the natural slime coat on fish. alpha™ is non-acidic and will not impact pH, nor will it over activate skimmers. Use at start-up and whenever adding or replacing water.
9 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Salinity is a blend of salts specifically formulated for the reef aquarium that contains all essential major, minor, and trace components found in natural reef waters, but contains no toxic or non-essential components. Additionally, salinity is the most concentrated salt blend on the market. With a hydration level of <0.5% salinity will yield a greater volume of prepared saltwater at a salinity of 35‰ per unit of weight than any other salt mix currently on the market.
salinity is identical to the distribution of anions and cations found in Natural Sea Water (NSW). We have compiled data from all the oceans and seas on the Earth, and have targeted the midpoint of the range for each element. We guarantee to be within ± 5% of the midpoint.
At a salinity of 35‰, for calcium, magnesium, strontium, pH, and alkalinity we have the following targets and/or ranges
Calcium
Target 422 mg/L, range 400–443 mg/L
Magnesium
Target 1336 mg/L, range 1269–1403 mg/L
Strontium
Target 8.4 mg/L, range 8.0–8.8 mg/L
pH
Range 8.4–8.6
Alkalinity
Range 3.2–3.8 meq/L
Sizes:2.72 kg (6 lbs) Makes 75 liters (20 US gallons),15.87 kg (35 lbs) Makes 450 liters (120 US gallons),29.75 kg (65.5 lbs) Makes 850 liters (225 US gallons)
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The aquarium pump takes care of the necessary water circulation, both in the aquarium and the filter system. The OptiMax pump allows adjustment of the water flow, requires little space and is energy-efficient. It helps maintain a healthy ecosystem within the aquarium.
Robust and quiet:
Thanks to its optimised rotor design, the pump is particularly quiet and has a long service life.
Adjustable water flow
Robust and Quiet
Optimized rotor design, the pump is particularly quiet and has a long service life.
Proper movement: Ideal for efficient water circulation or for operating an aquarium filter
Easy to adjust: The water flow rate can be easily adjusted
Area of application: Only for use inside the aquarium and underwater
Efficient: Particularly efficient water supply
Compact design: The OptiMax 300 and 500 are particularly easy to conceal
Usage: Suitable for both Wet and Dry purpose
Practical: Two suction holders for mounting in place
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The element Ca Reactor provides and maintains a virtually constant calcium, magnesium and alkalinity ratio, which is critical to the long term success of reef aquaria. The element Ca Reactor functions by using CO2 to react with a calcium reactor media such as Seachem’s Reef Reactor. CO2 acidifies the water flowing through the reactor and thereby dissolves the media which releases calcium, magnesium, carbonates among other elements and components of the chosen reactor media. A CO2 filled tank along with a pH probe and preferably a CO2 controlling system are required and/or highly recommended for proper functionality of the element Ca Reactor.
Easily Removable Inner Chamber
The inner chamber can be removed without full breakdown making it easy to clean, change or top off media
CO2 Recycling Feature
Make full use of CO2 injection by recirculating it using the element™ Ca's CO2 recycling feature. This also offers potential savings on the cost of CO2 canisters and refills
High Capacity Chamber
The reactor chamber can hold up to 1.2 Liters of your choice of calcium reactor media
Effluent Control Valve
Easily control the release of dissolved media into the aquarium. The water can be directed back into the sump, directly to the aquarium, or even a protein skimmer such as the aquavitro division series.
Highly Reactive Probe Placement
Allows for rapid response by controllers to avoid over-shooting CO2 injection. Saves CO2 and allows for consistent and efficient dosing
Powerful External Pump
Allows for higher column flow volume with more contact time and surface area. Allows for easy maintenance of the pump at anytime.
But wait...there's more
Easy Maintenance
The element™ Ca can be quickly and easily dismantled for maintenance and thorough cleaning.
Anti-Vibration O-rings and Rubber Feet
Additional sound-dampening features assist in silent skimmer operation
Setup Versatility
The element™ Ca can be setup in three different configurations based on preference and placement within the system being run.
Patent Pending Compact Base Design
Designed with a compact footprint in mind to fit in virtually any sump
Operation is Independent of Water Level in Sump
Variations in sump water level don't impact the function of the skimmer
3 year warranty
The element™ Ca is guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your skimmer. The warranty covers the replacement of the defective parts.
Setup Versatility
The element™ Ca has the flexibility to be setup in three different configurations for managing the effluent and CO2 connections. This is a key highlight of the element's™ modularity and versatility.
Option 1 simply utilizes the connections as described in the instruction manual included with your element™ Ca Reactor. Option 2 reverses these connections. Choosing between the two will be largely a personal preference, but factors to consider are how convenient CO2 regulation is setup for the system or where the effluent line might be better located. Additionally, in practice, some might find better management of CO2 recovery in one or the other.
If CO2 recovery is of primary concern, then Option 3 might be the better choice. Using this configuration, the effluent tubing connects directly to the base and no CO2 is lost. However, it is still beneficial to direct the effluent flow from the tubing into a protein skimmer such as the aquavitro® division series or to a point where there is consistent water surface disruption, ensuring that any possible CO2 is driven out of solution or that low pH water has its pH increased in value before flowing back to the aquarium
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Division skimmers are designed with the aquarist in mind and offer a host of unique features including a polycarbonate collection cup with built in handle, height based drain regulation, an innovative silencer, complete micro bubble removal, and air and water flow versatility. Its patent-pending base design and adjustable components make division skimmers the perfect solution to fit an assortment of sump configurations. They are easy to assemble right out of the box and start up in under a minute.
Unique Collection Cup Design
Impact resistant plastic design with molded handle and optional drain make for a versatile, highly durable collection cup.
Innovative Silencer Design
Versatile and highly effective air silencer design means a super quiet intake that can be placed anywhere along the drain spillway. Dual chambered for maximum noise reduction.
Additional Pump Option
The Secondary Pump Kit (sold separately) allows you to finely adjust the amount of water you want to treat. The Pump recirculates water and air on itself, reducing consumption and optimizing skimming. This increases skimming efficiency by up to 30%.
Complete Micro Bubble Removal
The addition of a sponge and sock to the drain spillway prevents micro bubbles that may irritate corals from being released into the aquarium.
External Pump
Allows for higher column volume with more contact time and surface area. Allows for easy maintenance of the pump at anytime.
High Drain Point/Height Based Drain Regulation
A high drain point means no resistance and a more stable level in the skimmer vs bottom draining designs. Adjust the height of the drain tube and drain spillway by turning the threaded rod to adjust the level of the water and foam in the reaction column.
Versatile Sump Placement
division™ skimmers can be configured in a variety of ways to best fit your setup. Turn the collection cup and the spillway to the front, back, or side. Additionally, the silencer can be positioned in multiple places along the spillway. Even the height of the spillway can be incrementally changed to achieve the best performance.
But wait...there's more
Cylindrical Column
Provides a longer path with more contact time for bubbles than with conical designs. This results in higher skimate volume and quality
Anti-Vibration O-rings and Rubber Feet
Additional sound-dampening features assist in silent skimmer operation
50/50 Air to Water Balance
Optimal efficiency in skimmer input
Patent Pending Compact Base Design
Designed with a compact footprint in mind to fit in virtually any sump
Operation is Independent of Water Level in Sump
Variations in sump water level don't impact the function of the skimmer
3 year warranty
division™ skimmers are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your skimmer. The warranty covers the replacement of the defective parts.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Perfect Foundation for Your Peninsula Reef
Elevate your aquascape with the purpose-built Red Sea Max Nano Peninsula Cabinet. Designed specifically to match the exact footprint of the Max Nano Peninsula, this premium stand seamlessly extends the sleek, modern lines of your aquarium straight to the floor, creating a stunning visual centerpiece.
More than just a piece of furniture, this cabinet is engineered specifically for the harsh, high-humidity environment of a saltwater reef.
Premium Features
Marine-Spec Construction: Built to withstand the elements of reefkeeping. Featuring weather-resistant, epoxy-painted doors that protect against saltwater splashes and high humidity.
Seamless Integration: Perfectly matches the unique dimensions of the Peninsula glass, giving your system a flush, custom-built look.
Modern Minimalist Design: Features a sleek, handle-free profile with premium "push-to-open" doors and soft-close stainless steel hinges.
Smart Organization: Provides ample interior space to hide your power center, auto top-off reservoirs, and messy cables, keeping your viewing area completely distraction-free.
Specifications
Compatibility: Exclusively for the Red Sea Max Nano Peninsula
Dimensions (L x W x H): 45cm x 58.5cm x 87cm
Finish Options: Available in premium Black or White
Assembly: Flat-packed for safe shipping (easy assembly required)
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
All-In-One Plug & Play reef system
Increased depth to add 40% more display space for better aquascaping potential
Rimless, ultra-clear glass
Built-in AIO rear sump filtration system with all the bells and whistles
Max Nano REEF-SPEC Protein Skimmer
Surface skimmer with removable combs
225 Micron filter bag, sponges, and REEF-SPEC carbon
240GPH Sicce Return Pump
240GHP Circulation Pump
Automatic Top Off unit with 0.4 gallon freshwater reservoir
Multidirectional, adjustable eyeball return nozzle
Built-in Power Center to turn skimmer and pumps on/off for easy maintenance
Rotatable rear sump screen for easy access to filtration compartment
Includes ReefLED 50 Light and mount
Coral-specific light spectrum with dedicated Moonlight channel
WiFi-based lighting control via ReefBeat app
Marine-spec aquarium cabinet in weatherproof white or black finish
From lighting to filtration and stunning looks-- the Red Sea MAX NANO all in one aquarium series has a great recipe for success, allowing you to have your own piece of the ocean right in your living room.
Red Sea is constantly innovating and keeping up with current technology in the aquarium market and reefkeeping hobby. The MAX Nano AIO tanks now include LED lighting along with a full filtration system, in addition to circulation and return pumps. The ultra-clear glass lets you see your fish and corals' true colors in a sophisticated rimless design that will instantly bring life and elegance to any room.
Max NANO Complete includes 1x Red Sea ReefLED 50 Light
Over the past few years Red Sea has a lot of time dedicated to testing and researching LED lighting, and the culmination of those efforts led them to the ReefLED 50. Designed for optimal growth while producing great coloration with a pleasant shimmer effect. Red Sea didn't just stop with great function and form, they integrated the control of the light into the ReefBeat smart aquarium app. The ReefLED 50's built-in WiFi lets you directly connect the light to your smart device to set the daily schedule, color, intensity, and other features. Every Reefer Deluxe Aquarium Kit includes the ReefLED lights along with the appropriate amount of mounting arms.
Pump Power Center
Max Nano has an integrated power switch box that circulation pumps the protein skimmer can be connected to for easy on/off control making them a true all in one aquarium system.
MARINE-SPEC Cabinet
Every MAX tank comes with a stand made for saltwater aquariums with marine-spec laminate cabinet, weatherproof epoxy painted doors, push open latches, and soft close stainless steel hinges. Stands are available in two exterior colors (black or white) where the interior will be black on both stand color options allowing for a cleaner overall appearance over time.
Ultra Clear Glass
Standard glass can "wash" out colors because of a small percentage of iron in all glass making it have a slight yellowing appearance. Red Sea uses an Ultra Clear beveled edge glass that has a low iron content allowing you to see the true color of your fish and coral without having any color distortion. The 8mm thick front glass lets Red Sea produce a rimless tank without the need for any ugly bracing.
Filtration and Circulation
Proven Multi-stage filtration lets you keep even the most delicate corals and fish. The included return and circulation pumps are secretly hidden in the filtration compartment keeping the display portion looking clean and elegant. Along with the Reef-Spec Nano skimmer, media towers, extra space for additional filters and provisions to add a chiller too.
RS Nano skimmers have a 3:1 water to air ratio creating the perfect skimming conditions within the body of the skimmer. With the advanced design of the protein skimmer, it will not be affected by water fluctuations due to evaporation and has an adjustable outlet gate creating the perfect skimmate consistency for the water conditions.
Specifications
Dimensions
Display Tank - 18" L x 23"W x 18"H
Total System w/ Cabinet (excluding light) - 18"L x 23"W x 52"H
Water Volume
Total System - 26 Gal
Aquarium Display - 22.5 Gal
Rear Sump - 3.5 Gal
RO Reservoir - 0.4 Gal
Glass Thickness
Front - 5/16"
Side - 5/16"
Bottom - 5/16"
Lighting
Included LED - 1x ReefLED 50 + mount
Nominal Total Output - 50W
Control - Integrated WiFi control via ReefBeat app
Circulation
1x 240 GPH hidden circulation pump
Filtration
Protein Skimmer Water Flow - 46 gph
Protein Skimmer Air Flow - 15 gph
Mechanical Filtration - Bubble trap sponge
Filter Bag - 1x 225 micron thin-mesh bag
Filter Media - 3.5 oz REEF-SPEC Carbon
Cabinet
Type - Marine Spec Weatherproof
Color - Black or Pearl White
Additional Accessories
Integrated Power Center - Yes
Integrated Water Top Up System - Yes
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
• The Flipper aquarium mat featuring clownfish artwork serves as an anti-fatigue mat when spending hours in front of your tank.
• This mat features a non-skid rubberized backing that is waterproof, durable, and anti-slip.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
• Flipper Platinum NANO Aquarium
Scraper for NANO-SIZED Glass and Acrylic Tanks.
• Made with a shallow scraper angle, ideal for the
tight confines of nano tanks.
• The blade can be inserted in any direction to
access multiple different scraper edges.
![RedSea Reefer DC Skimmer [ W/O Controller ]](//www.dorrypets.co.za/cdn/shop/files/Skimmer.-Techs-Specs.-Height-mob-3.webp?v=1706001988&width=645)
![RedSea ReefRun 7000 DC Pump [W/O Controller]](//www.dorrypets.co.za/cdn/shop/files/251919-redsea-reefrun-7000-dc-pump-an.webp?v=1705480819&width=645)
![RedSea ReefRun 7000 DC Pump [W/O Controller]](//www.dorrypets.co.za/cdn/shop/files/251919-redsea-reefrun-7000-dc-pump-le.webp?v=1705480818&width=645)
![RedSea Reefer DC Skimmer [ W/O Controller ]](http://www.dorrypets.co.za/cdn/shop/files/Skimmer.-Techs-Specs.-Height-mob-3.webp?v=1706001988&width=645)
![RedSea ReefRun 7000 DC Pump [W/O Controller]](http://www.dorrypets.co.za/cdn/shop/files/251919-redsea-reefrun-7000-dc-pump-an.webp?v=1705480819&width=645)
![RedSea ReefRun 7000 DC Pump [W/O Controller]](http://www.dorrypets.co.za/cdn/shop/files/251919-redsea-reefrun-7000-dc-pump-le.webp?v=1705480818&width=645)
