Scape N was developed to supply Nitrogen, to aquarium plants, in the correct quantities.
By adding one pump (approximately 1ml) of Scape N per 50L of aquarium water on a daily basis, you will be supplying enough Nitrogen for your aquarium plants.
Plant growth will increase over time, and as your plant mass increases, you may increase your dosage of Scape N to keep up with your plants increasing demands.
As with any aquarium, maintaining the balance is critical in keeping your aquarium plants healthy. It is for this reason that we recommend that a 35-50% water change be carried out once a week. This is not to remove fertilizer from the aquarium. It is to remove the waste produced by fish, as well as plants. Plants and fish secrete hormones and waste into aquarium water, and by doing a 50% water change, one can simply halve the amount of waste products within the aquarium, thus keeping the system in balance.
Not only does this maintain the balance, it reintroduces minerals that your aquarium plants require, such as calcium.
NITROGEN DEFICIENCY:
If a deficiency should occur, your plant will lose some of the older leaves, as it absorbs the nutrient content in the leaves from the tip of the leaf to the stem of the plant and sheds the old leaf. You may also notice that the new plant leaves are small, white and look wilted. This is a clear sign of a Nitrogen deficiency in your aquatic plant growth.
To counter this problem, one should immediately carry out a 50% water change, ensuring that you remove the dead leaf matter from the bottom of the aquarium. Once the aquarium is filled again, you can begin dosing Scape N as per the instructions on the bottle.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Flourish Traceâ„¢ supplies a broad range of trace elements demonstrated to be necessary for proper plant health and growth (see below for signs of deficiencies). Trace elements are normally depleted by utilization, oxidation and precipitation. The latter two processes occur more rapidly than with other micronutrients. This makes it important to restore trace elements on a regular basis. Flourish Traceâ„¢ is safe for invertebrates such as shrimp.
We normally recommend one start with Flourish® and/or Flourish Tabs™. These provide a broad range of micro-nutrients (vitamins, amino acids) and micro and trace elements (iron, manganese, nickel, cobalt, etc) that will enhance plant health and growth. If the growth rate is substantial the trace elements are often utilized more rapidly than the other components in Flourish®, thus in this case it would be beneficial to also employ Flourish Trace™ along with Flourish® and/or Flourish Tabs™.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Flourish Advanceâ„¢ is an all-natural, biologic growth enhancer for aquatic plants. Its advanced formula contains phytohormones, minerals, and nutrients that dramatically stimulate the growth of both roots and shoots in aquatic plants. Phytohormones are a group of naturally occurring compounds that play crucial roles in regulating plant growth in a wide range of developmental processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth and stress response. Used regularly, it also enhances mineral absorption and improves disease resistance. It is non-toxic and completely safe for all plant varieties as well as for fish and aquatic organisms.
During the first ten to fourteen days after application, Flourish Advanceâ„¢ works to stimulate root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.
Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available technology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 20 or a 1000 litre aquarium
Benefits of the EHEIM JÄGER thermostatic heaters
Precise temperature adjustment from 18 up to 34 °C
Simple and safe recalibration (±2 °C)
Temperature control accuracy ± 0,5 °C
Heat kept at a constant level
Heating function is indicated by a control lamp
Completely submersible (watertight)
With automatic dry run shut-off (Thermo Safety Control)
A glass jacket increases the heating surface and ensures optimum even heat emission
Handy cable length ca. 170 cm
Including double suction cup holder
9 sizes for aquariums from 20 up to 1000 litres
Suitable for fresh and salt water
8 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Tidal™ Pump (35, 55, 75, & 110) is self-priming which means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter. This also means that filter will restart itself with no trouble after a power outage or after maintenance.
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The aquarium pump takes care of the necessary water circulation, both in the aquarium and the filter system. The OptiMax pump allows adjustment of the water flow, requires little space and is energy-efficient. It helps maintain a healthy ecosystem within the aquarium.
Robust and quiet:
Thanks to its optimised rotor design, the pump is particularly quiet and has a long service life.
Adjustable water flow
Robust and Quiet
Optimized rotor design, the pump is particularly quiet and has a long service life.
Proper movement: Ideal for efficient water circulation or for operating an aquarium filter
Easy to adjust: The water flow rate can be easily adjusted
Area of application: Only for use inside the aquarium and underwater
Efficient: Particularly efficient water supply
Compact design: The OptiMax 300 and 500 are particularly easy to conceal
Usage: Suitable for both Wet and Dry purpose
Practical: Two suction holders for mounting in place
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
AQUAEL has expanded its range of products to include three novelty aquarium pumps: UNI PUMP 700, UNI PUMP 1000, UNI PUMP 1500. Their main features are: excellent energy efficiency, high performance, small size, and modern design.UNI PUMP 700, UNI PUMP 1000, UNI PUMP 1500 can serve to pump water or to actuate canister filters and other aquarium devices (e.g. sterilisers, coolers, skimmers, sumps etc.). Thanks to their water-tight design, they can be operated either fully submerged in the water or out of the water (as straightway pumps). The pumps are suitable for use in fresh water and salt water alike. Their main advantages are: a small size (they will fit into any fish tank, sump, or aquarium stand), low power consumption (12 and 19 W correspondingly), quiet operation and ease of installation. In addition, they have an interesting design that will combine perfectly with other devices used in modern aquariums.UNI PUMP 700 is powered by 12V low-voltage current (safe power) via an adaptor mounted on the connector that facilitates the installation of the device e.g. inside aquarium stands. Being a low-voltage device, the pump can also be recommended for purposes other than fish-keeping, since it can be used wherever people are required to come into direct contact with water while the device is in operation (e.g., laboratories, restaurants, etc.).
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Aquael is proud to present yet another novelty product: MINIBOOST 100 and 200 a tiny aquarium aerator with adjustable performance. The device can achieves high performance despite a very small size and low power consumption.The MINIBOOST 100 and 200 is targeted at owners of small and medium-sized aquariums (with a capacity of up to 100 l). It designed to provide effective aeration of water in the tank. In addition, the device can be used to drive conventional sponge filters (nowadays mostly used in shrimp tanks and aquariums where baby fish are kept). As already mentioned, the device is very small in size (just 8,5x4x4 cm – miniboost 100), which means that it is inconspicuous and does not occupy much space.A handy knob enables smooth performance adjustment. You can use it to adjust the airflow to the needs of even the smallest of aquariums. A special design of the membrane makes it particularly durable, so that it can remain in operation for a long time without the need for replacement. At all that, the aerator consumes mere 1.8 W of electric power and is very inexpensive to operate.The device is manufactured in Poland, which means solid workmanship and excellent usability. In addition, the device meets all the EU standards to ensure safety of use.We recommend that an aerator be installed in every freshwater aquariums, even if it is already equipped with a filter that has aerating capabilities. An efficient modern aerator significantly improves water oxygenation, creating even better living conditions for fish and other inhabitants of the aquarium.In addition, the use of an aerator improves the appearance of an aquarium. A stunning decorative effect can be achieved by using the AQUAEL AIRLIGHTS LED-illuminated aeration nozzle.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Strideways CO2 regulator PLUS is a professional system that comes equipped with a dual stage & dual gauge mechanism for safety measures and precise dosing.Robust construction, very precise needle valve and includes a bubble counter for simple and precise management of CO2 levels.
This modular CO2 system allows you to add more than one exit, completely Plug&Play, to offers the possibility of connecting one single bottle of CO2 to more than one aquarium.
Designed for use with standard DIN477 CO2 cylinders and it also offers a DC solenoid valve, for a high durability and low heating operation.
3 Year Warranty
Dual stage regulator, prevents end-tank-dump keeping your aquarium livestock safe and CO2 levels constant.
Allows a single CO2 cylinder to be split and distributed amongst multiple planted aquariums by using Strideways PRO CO2 Extender;
Very high precision adjustment, integrated needle valve with smooth and precise adjustment;
Heavy (Not light, like other cheap regulators made of aluminum), so not easily broken;
DC voltage power supply with German Certification. Low power (3W), IP65 solenoid valve;
Minimalist Design, product made for aquarists, beautiful and simple to use, not adapted from other industries;
High quality o-ring sealing. Two times more resistant compared with the ordinary PTFE sealing, transparent
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Patented, Variable Magnetic Circuit,High EfficiencyOperating Voltage : Full Range AC100V to 230V .Can Be High Speed Drive 6000 cycle/Minutewhile use DC150V.No Vibration Noise Sound from current flow.
Media
Air, Water, Oil inert gases
Operating method
Direct acting
Model
A2AD 2/2 way, A3AD 3/2 way
Effective Sectional area mm2 (CV)
4.9 (0.27)
Pipe joint size
1/8" / 1/4"
Viscosity
21c ST
Service pressure rangekgf/cm2 (psi)
0-20 (0-286)
Pressure resistancekgf/cm2 (psi)
30 (429)
Service Temperature range(atmosphere or fluid used)
-10 to 60ºC
Power consumption
AC 110V: 10VA /10mS. (inrush)0.25 VA (hold)AC 220V: 40VA / 10mS. (inrush)1VA (hold)
Insulation
F class
Rating
100%
Protection
IP65
Cable Plug
DIN 43 650 B, 0-250V
Body Material
Brass / Stainless steel
Seal Material
NBR, FPM
Weight (g)
170
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
IMPORTANT NOTE – Saga – CO2 Super Diffuser: You need to soak the Saga – CO2 Super Diffuser for 2 to 3 days before you use it, in order for the ceramic to be come saturated.
It has excellent CO2 dissolution rates. Easy maintenance and durable materials make this CO2 Aquarium Diffuser a perfect choice for novice and expert aquascapers alike. It is designed to be used as a regular glass CO2 atomizer diffuser, but it offers higher CO2 dissolution rates.
The diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut.It is recommended that you set the pressure on your regulator to a minimum 2 bar as a starting point.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Experience lush plant growth with the SAGA CO2 Super Atomizer. With its advanced CO2 delivery technology, the SAGA Atomizer provides aquarium plants with the ideal environment to enhance growth and development. The Atomizer's precision ensures optimal CO2 levels to help promote healthy aquatic life.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Experience lush plant growth with the SAGA CO2 Atomizer. With its advanced CO2 delivery technology, the SAGA Atomizer provides aquarium plants with the ideal environment to enhance growth and development. The Atomizer's precision ensures optimal CO2 levels to help promote healthy aquatic life.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Best way to diffuse CO2!
High resolve rate and great diffusing effect.
Description:
Patented impeller design, completely crushes CO2 bubbles.
Promise the best CO2 disollution rate effect.
Compact size for saving space, suitable to set external or internal tank.
Durable material for preventing deformation and acid resistant.
Easy to clean and simple to maintain.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
ISTA DISPOSABLE CO2 CARTRIDGE 16G - 3 PACK
Contains 16g of pressurized liquid CO2. Full weight of pressurized liquid CO2 assured for the best value compared to other existing similar cartridges in the market.
Strict quality control, and safety guaranteed.
Disposable cartridge, free from the trouble of CO2 refilling.
Simple and easy to replace cartridge.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The convenience of not having the hassle in refilling cylinders
Ideal for Nano Tanks. These sets can be easily adapted to any kind of tank, even plug and play tanks. Ideal for beginners, and low light tanks, with low demands for CO2.
Place the CO2 diffuser to the very bottom of the tank to achieve the best CO2 diffusing effect.
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Quality aluminum cylinders add a professional and elegant look to your aquarium set up.
Ista’s CO2 cylinders safety standards are approved by Technical Inspection Association (TUV).
Seamless aluminum CO2 cylinder.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
CO2 Aluminum Cylinder Supply Set / 1L – Professional
Ista’s CO2 cylinders safety standards are approved by Technical Inspection Association (TUV).Supporting base keeps CO2 cylinder in position avoiding any potential damage to the CO2 regulator.Pressure reduced vertical type CO2 regulator assures constant and accurate CO2 dosing rate.Unique top quality ceramic promises the most even and delicate CO2 diffusing effect.Acrylic made 2 in 1 CO2 bubble counter provides clear CO2 bubble reading and to be acid and breakage endured.Stainless spring design check valve assures most reliable function of stopping backflow.Fastening node assures no bursting out of air tube.Seamless aluminum CO2 cylinder.Stylish design brings additional elegancy to your aquarium set up.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Contains 95g of pressurized liquid Co2. Full weight of pressurized liquid CO2 assured for the best value compared to other existing similar cartridges in the market. Strict quality control and safety guaranteed. Disposable cartridge free from the trouble of Co2 refilling. Simple and easy in cartridge change.
15 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Three functions in one, CO2 bubble counter, check valve, and diffuser assures the best diffusing effect.
Acrylic material allows accurate CO2 bubble reading.
Easy assembling for filling up water, replacing, and cleaning ceramic.
Stainless steel spring check valve effectively prevents backflow.
Specific material of suction pad for acid, harden resistant and longer operation life.
4 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The 17 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2 gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2 injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 16 mm ID/22 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 27 mm disc allows for the diffusion of large volumes of CO2 gas, making the 27 mm Beetle Diffuser an excellent choice for mid-sized aquaria or higher-growth aquaria.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
3 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Only compatible with Strideways CO2 regulator PLUS
3 year warranty
Each manifold block comes with a built-in bubble counter
Includes a built-in bubble counter, to create ease for the user. Each Strideways Extender Manifold Block can be individually tuned to allow precise control over CO2 levels for every new block. Useful for aquarium setups with differing CO2 levels, while also bypassing the need for more than one regulator.
This modular CO2 system allows you to add more than one exit, completely Plug&Play, to offers the possibility of connecting one single bottle of CO2 to more than one aquarium. Designed for use with standard DIN477 CO2 cylinders and it also offers a DC solenoid valve, for a high durability and low heating operation.
Only compatible with Strideways CO2 regulator PLUS.
Included:
Bubble counter;
High precision needle valve;
Tools to install the extender block into your existing manifold
Extra O-Ring for the manifold block.
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Dennerle CO2 pH-electrode set is used for continuous measurement of the pH-value in freshwater- and marine aquariums. The modern gel electrode is the basis for optimal fish and plant care. The gel electrode also has a Quali-Safe electrode protection. Including calibration station for quick and convenient calibration. The calibration station saves valuable calibration solution. The connection cable has a length of 3 metres. For or all Dennerle pH controllers and all pH measuring devices with BNC connector.
Features
Complete set
Modern gel-electrode
Ready for immediate use
With calibration solution pH 4 and pH 7
For all Dennerle pH controllers and all pH measuring devices with BNC connector
Scope of delivery
Modern gel-electrode
Electrode holder
Calibrating station
50 ml pH 4 calibrating solution
50 ml pH 7 calibrating solution
250 ml Distilled water
