5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Seachem Zip Bag Large Large-mesh filter bag with zipper Corrosion proof zipper 48 cm x 43 cm (19” x 17”) No Strings or Ties The Large Zip Bag is a mesh bag for holding filtration media. It is available in a 48 cm x 43 cm (19” x 17”) size, easily holds 18 liters of filtration media, and it comes with a convenient corrosion-resistant zipper. It is ideal for large filtration media, especially biofltration such as Matrix and Pond Matrix . Sizes: 48 cm x 43 cm (19” x 17”)
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Bag is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life. Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces. Sizes: 13 x 25.5 cm (5” x 9.5”) Comparing Seachem Filter Bags The Bag Dimensions 13 x 25.5 cm (5” x 9.5”) Mesh Size Superfine (180 Micron) Closure Mechanism Plastic Zip Tie Material Polyethylene Seams Welded Resistant to bleach, caustics, and acids Yes Media Compatibility All Seachem Filtration Media Zip Bag Sm Dimensions 32 x 14 cm (12.5” x 5.5”) Mesh Size 25 Mesh Closure Mechanism Zipper Material PVC Seams Stitched Resistant to bleach, caustics, and acids Corrosion-Proof Zipper Media Compatibility All Seachem Filtration Media Zip Bag Md Dimensions 32 x 14 cm (12.5” x 5.5”) Mesh Size 16 Mesh Closure Mechanism Zipper Material PVC Seams Stitched Resistant to bleach, caustics, and acids Corrosion-Proof Zipper Media Compatibility PhosGuard , MatrixCarbon , SeaGel , de nitrate , Renew , Matrix , Zeolite Zip Bag Lg Dimensions 48 x 43 cm (19” x 17”) Mesh Size 8 Mesh Closure Mechanism Zipper Material PVC Seams Stitched Resistant to bleach, caustics, and acids Corrosion-Proof Zipper Media Compatibility Matrix Pond Matrix
20 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Bag is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life.
Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be exercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The ATI Phosphat Stop Filter Media for Aquariums is a high-efficiency phosphate absorber based on iron hydroxide. It is capable of removing phosphate from both seawater and freshwater quickly and efficiently. It eliminates phosphate, silicate, arsenic, and other dissolved organic waste while also preventing algae formation and improving coral health. The phosphate cannot be released once it has been bound. Even if it is left after its service life has expired, nothing is leached back into the water. ATI phosphate stop is ideal for use in reef aquariums because it does not introduce any harmful substances into the water and may aid in the reduction of certain heavy metals
1 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The all-new REEFER G2 series of Reef-Ready aquarium systems has improved upon the REEF-SPEC infrastructure of the original Red Sea REEFER series. With a new and revamped water management system, extra-fortified plywood cabinets, thicker and rimless glass, refugium-ready & ReefMat-compatible sumps, and extended warranty plans; the G2 REEFER aquarium series is designed to be the perfect canvas for the customized reef tank of your dreams!
New & Improved Features
Rimless ultra-clear, beveled-edge glass with increased thickness
Extra-fortified plywood marine-spec laminated cabinets (with additional aluminum “floating tank” supports on REEFER 625 G2 models and bigger)
Dual side-facing return pump outlets for better water distribution (On REEFER 350 G2 models and bigger)
Large central overflow box to hide piping, with a large surface skimmer with removable weir comb for easy cleaning
Silent downflow system with enlarged rectangular inlet to reduce turbulence
Assembly-ready piping now with extra bulkhead connectors in both Metric and USA sizes for customized setups
New and improved high-precision valve on the downflow pipe for easier flow regulation and near-silent operation
Professional REEF-SPEC sump, including:
Mechanical filtration media compartment complete with micron filters and filter cups
Optional refugium compartment
Adjustable height skimmer chamber
Bubble trap
RO Reservoir
Plug & play ready for ReefMat 500 or 1200 Auto Filter Roller (sold separately)
Additional chamber for chillers, controllers, or other equipment (on most models)
Extra-fortified Glass and Marine-Spec Cabinets
The G2 series of REEFER aquariums are rimless and constructed from ultra-clear, beveled-edge glass with an increased glass thickness of up to 19mm. These strong glass tanks sit atop newly fortified cabinet stands made of plywood and with Marine-Spec, water-resistant lamination. Each cabinet stand follows the contours of the aquarium glass, with the larger REEFER G2 models featuring an additional “floating tank” aluminum support. Adjustable leveling feet & stainless steel hinges ensure a lasting and durable stand for your dream aquarium.
Improved Water Management & Plumbing
Up top, the G2 REEFER systems employ a large overflow box with dual side-facing return pumps for optimal water circulation and increased surface skimming. The overflow box includes a lid which hides plumbing components, as well as easily-removable weir combs for quick cleaning and improved surface skimming. Water then exits from the overflow box and travels down an enlarged and rectangular inlet to the downflow pipe, allowing for reduced turbulence & quieter operation. All G2 models also include a newly improved high precision valve on the downflow pipe, allowing for simple regulation to further tune your flow.
Reef-Ready Sump– Now ReefMat Compatible
As with the previous generation of REEFER, the G2 sump includes a mechanical filtration compartment complete with micron filter sock(s) and filter cup(s) to keep large pieces of debris and detritus from clogging pumps and other pieces of equipment. New to the G2, this chamber can be alternatively used etohouse a ReefMat 500 or 1200-- no modifications required! Water flows from the filtration chamber into the adjustable-height skimmer compartment, where the water will be kept at a steady level to aid in the best performance for your choice of skimmer, or any other filtration components that you choose to include. The water will then flow through the final bubble trap and into a chamber where the return pump (not included) can be placed to pump water back through the Reefer tank's return plumbing.
Addtional features of the Reef-Ready sump system include an optional refugium compartment for growing chaeto or other macroalgae, as well as an RO reservoir that can hold a few days worth of top off water to keep the water level, salinity and flow rates consistent throughout the tank.
3+2 Extended Warranty Plans
All REEFER aquariums have included a standard 2-year warranty. With the new G2 models, you can now purchase an additional 1-2 year warranty plan when registering your new system online. That’s a total of 5 years of worry-free protection!
DELUXE Models
All Deluxe REEFER models include ReefLED 90 or 160 light(s) with mounting arm(s) for optimal coral growth right out of the box. Each ReefLED offers a compact LED array providing reef-safe lighting through a single channel that combines ultraviolet, violet, and blue LEDs; in addition to a 9,000 Kelvin white channel and a separate dedicated 3W Moonlight channel for night time viewing.
All ReefLED lights are equipped with a built-in Wi-Fi that allows total control via ReefBeat smart aquarium app (which controls all Red Sea devices). The app includes pre-set lighting programs, along with additional features such as sunrise/sunset effects, lunar cycle moon light, random clouds and even an acclimation program for new installations.
Each Deluxe REEFER model includes either ReefLED 90 or ReefLED 160S lighting units, along with the appropriate amunt of mounting arms. The arms attach firmly onto the rear wall of the tank and can be rotated to the upright position during reef scaping or other tank maintenance.
Specifications
Display Tank Dimensions - 36"L x 22"H x 22.6"W
Display Tank Volume - 65 Gallons
Total System Height - 56"
Total System Volume - 80 Gallons
Sump Volume - 15 Gallons
Front Glass Thickness - 1/2"
Side Glass Thickness - 1/2"
Bottom Glass Thickness - 1/2"
Included Lighting - 2x ReefLED 90s + mounting arms
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Guaranteed effectiveness with several different Carbon sources
The use of a Carbon source in a marine aquarium is the result of an old technique to lower strongly and quickly the levels of nitrite, nitrate, and phosphate present in the water.This is like the technique of vodka/vinegar/sugar dosing, but without the risk of introducing unwanted elements (coloring, flavoring, etc.) and with multiple carbon sources in right proportions.The added organic carbon strongly stimulates bacteria and quickly lowers the levels of NO2, NO3 and PO4. This bacterial surplus will be consumed by the animals in the tank or eliminated via efficient skimming.
[N,P]EX is a combination in the right proportions of several different carbon sources which guarantee its effectiveness. It should only be used by aquarists who are experienced and knowledgeable in monitoring the values of their aquarium.It's recommendend to use when all other NO3 and PO4 limitation measures are no longer effective. Gradually increase the amounts according to the expected parameters levels. Once they are stable, maintain the dosage while regularly monitoring these levels.
For the exact application, please refer to the table in the download area. Nano = 1.000 L Aquarium 100 = 2.500 L Aquarium 250 = 6.250 L Aquarium 01 = 100.000 L Aquarium
Do not leave within the reach of children.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Coralific Delite™ is a revolutionary diet, specifically developed for corals and their unique nutritional needs while offering two modes of feeding: "Targeted Gel Feeding" directly on the mouth of a specific coral or "Squirt & Go™ Feeding" which allows the coral polyps to capture the food in the water column like they would zooplankton.
Dual Use – Offers Maximum Feeding Flexibility
Can be used with a syringe in its gel form as a target food
Can be used after a short hydration period as a broadcast feed for larger coral populations
Excellent zooplankton replacement
Offers immediate feeding response
Give Your Corals The Boost They Crave
Accelerates coral growth
Visible color improvement
Contains necessary nutrients inverts require, specifically: trace elements, proteins, vitamins and astaxanthin.
1. Targeted Gel FeedingMix two parts tank water to one part Coralific Delite™ to form a gel. Let soak 3 minutes to set, then use a syringe or dropper to squirt food in a slow back and forth motion and place the mixture on the mouth of the coral to be fed.Ideal for many LPS (large polyp stony corals) and sea anemone which have larger mouths.2. Squirt & Go™ FeedingMix four parts tank water to one part Coralific Delite™ to form a low viscosity liquid with a creamy texture. Use a dropper to squirt food with a slow motion in the vicinity of the corals to be fed. The viscosity can be adjusted by increasing or decreasing the amount of tank water used.Ideal for soft corals like horny coral and feather dusters which have a smaller mouth.Care should be taken to avoid using too much Coralific Delite™ at one time. The food is highly concentrated and a very small size. Most consumers have a tendency to use too much which cause water quality issues. Smaller amounts more than once a day is a better option than too much at one time. Especially when using as a direct feed. Allowing excessive food to site on the coral for an extended period of time is not desirable.Note: Hikari® Coralific Delite™ contains higher levels of natural ingredients which may cause a slight change in color from one production lot to another. Rest assured because of our rigid quality standards each package meets our superior nutritional specifications.
Krill meal, xanthan gum, krill extract, cassava starch, lecithin, wheat flour, DL-methionine, astaxanthin, brewers dried yeast, garlic, choline chloride, vitamin E supplement, L-ascorbyl-2-polyphosphate (stabilized vitamin C), inositol, d-calcium pantothenate, riboflavin, vitamin A supplement, thiamine mononitrate, pyridoxine hydrochloride, niacin, folic acid, vitamin D3 supplement, biotin, ferrous sulfate, magnesium sulfate, zinc sulfate, manganese sulfate, copper sulfate, calcium iodate.* 01-49H* Because of our commitment to providing the highest quality nutrition available, some differences in ingredients may occur due to regular formula updates.
Crude Protein
Crude Fat
Crude Fiber
Moisture
Ash
min. 42.0%
min. 13.0%
max. 5.0%
max. 10.0%
max. 14.0%
Phosphorus
Vitamin A
Vitamin D3
Vitamin E
Ascorbic Acid
min. 1.0%
min. 18,000 IU/kg
min. 3,700 IU/kg
min. 250 IU/kg
min. 360 mg/kg
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
The Mantis Rubicon is a stylish, compact nano aquarium series, perfect for the home or office. Made from ultra clear Starphire glass wth carefully bevelled edges and a rimless design, the Rubicon provides the ultimate nano aquarium experience.
Out of the box includes the tank with a glass overflow panel, recirculating pump, plumbing and filter sock - nearly everything you need to get started!
A Perfectly Clear Viewing Experience. The Rubicon series features laser cut Starphire glass, to enhance your viewing experience. Unlike traditional lower grade glass, Starphire glass provides an unmatched levels of brightness, colour fidelity, clarity and visual appearance.
Large Filtration Area. The Rubicon Series makes fitting a protein skimmer easy, with a larger protein skimmer box size of 140 x 95mm. This also allows for more area for reactors and filtration media, making for a more practical aquarium experience. Effective Filtration. The Rubicon Series includes a 200 micron felt filter sock, meaning free-floating particles are removed from the water effectively, allowing for a more pleasant viewing experience while also helping remove waste from the water. Each Rubicon Cube also ships with Mantis Biospheres. A break through technology which allows for a greater surface area, meaning the most effective and efficient filtration possible.
A Strong, Reliable Heart. The return pump is the heart of a healthy aquarium. Featuring a powerful 600 litre per hour return pump, the Rubicon series allows for a healthy return flow. Forcing more water to be passed through the critical filtration stages.
Easily Adaptable & Customisable. The design of the Rubicon allows for the user to easily upgrade/change equipment on the aquarium. Larger space in the filtration compartment, and rimless sides mean no difficult and awkward hardware positioning.
Specifications:
Rubicon 4.0 External Aquarium
Dimensions: 450x450x400mm
Glass Thickness: 6mm
Water Height: 335mm
Water Volume (L): 75L
Skimmer Box Size: 140x95mm
Return Pump Size: 80x80mm
Filter Socks Included: Yes, 1x Sock
Glass Overflow: Yes
Return Pump: Return Pump 600L Included
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Impressive Performance – Remarkably Small FootprintDistinctive Turbulence Reducing BodySolid PVC And Acrylic ConstructionBubble Dispersant ChamberEfficient & Quiet OperationDisassembles Completely For Easy Cleaning And MaintenanceIn-Sump Installation Only
PLEASE REFER TO PRODUCTS DESCRIPTIONS BELOW FOR DETAILS OF EACH MODEL
Model: Tornado-120Pump: DC Pump 1000LAir Intake: 400 L/hPower: 12WBio load: up to 600 litresFootprint: 135x160x500
Model: Tornado-150Pump: Tornado 2000Air Intake: 800 L/hPower: 30WBio load: up to 850 litresFootprint: 160x200x520
Model: Tornado-180Pump: Tornado 3000Air Intake: 1000 L/hPower: 35WBio load: up to 1500 litresFootprint: 190x250x570
Model: Tornado-200Pump: Tornado 4000Air Intake: 2000 L/hPower: 50WBio load: up to 2500 litresFootprint: 285x230x640
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea’s highly-anticipated ReefDose redefines ease-of-use and smart functionality for aquarium dosing pumps, offering advanced programming and incredible dosing accuracy for the most demanding applications. The ReefDose was built from the ground up to meet the needs of modern reef aquarists. Utilizing Red Sea’s custom-built dosing heads, the ReefDose is capable of delivering incredible single-drop precision through a variety of dosing programs. The three dosing speed settings offer additional versatility, prioritizing whisper quiet operating at up to 15mL per minute, all the way up to 45mL per minute with Turbo mode.
Features
Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of ± 0.05ml or an average deviation of 0.5% (over 10ml).
4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule.
Easy assembly click-on/off dosing heads (no tools or alignment required).
Automatic delay between the heads to prevent chemical interaction between supplements.
Automatic dose compensation for doses missing due to power loss.
Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml.
On-demand manual dosing.
3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min.
Motor life expectancy of 10 years – based on 250ml/day/head.
The ReefDose is more than just another programmable dosing pump. Smart software functionality like the “Dynamic Dosing Queue” run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages, maintenance, or feeding.
ReefBeat App
The ReefDose is also part of the Red Sea smart ecosystem, integrating with other ReefBeat devices. With programming through the ReefBeat App, the ReefDose can be programmed for multiple automated dosing setups, or set up for individually customized dosing schedules. Through ReefBeat, you can schedule dosing programs to run every day, or only on selected days, with daily doses ranging from once per day to once per hour.
Automatic rescheduling after changes in dosing schedule or number of doses
Dose Queue presents coordinated list of doses scheduled for all heads
Dose Log keeps a record of supplement volumes per hour for up to 30 days
Peace of Mind - Receive notifications and alerts of missed doses and more
Volume monitor keeps tabs on when reservoirs need to be refilled
Set a dosing head to “Food Head” and use it to dose liquid foods
Download the ReefBeat App:
Specifications
Dimensions: 5.1”L x 4.1” H
Dosing Heads: 2
Dosing Precision: ± 0.05ml (avg. deviation 0.5% over 10 mL)
Dosing Range: 1x/day to 24x/day, 0.2mL to 1000mL per head
Dosing Speed: 15mL/min to 45mL/min
Tubing Connection: 3mm ID, 5mm OD
8 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
A unique blend of sediments that duplicate tropical fringing coastal mangrove environments.
Mineral Mud™ particles are in a size range compatible with soft, burrowing infaunal, macro animal assemblages. Ideal for mud refugiums, seagrasses, macro-algaes, and mangroves, Mineral Mud™ provides a variety of trace elements plus calcium, strontium, iron, sulfur and free carbon. In addition, Mineral Mud™ contains live marine bacteria to complete the tropical ecosystem.
Frequently Asked Questions
In what type of reactor would I use Mineral Mud™?
Mineral Mud™ is actually a refugium media that is meant to be used in a refugium type aquarium with lighting and with plants and algae growing in it. Mineral Mud™ quickly establishes an anaerobic denitrifying bed and acts as a wonderful media for growing most types of marine aquatic plants and algae. This creates an ideal environment for nutrient export, (through algae and plants), and micro faunal growth. It can be used alone or with a ½ to 1” cap of live or dry aragonite
Directions
For mud filters, empty jar into filter, then mix slightly, and add water (a “cap” of approximately 1/2 to 1 inch of live or dry aragonite sand is suggested). Wait 2-3 days, then begin pumps, and allow system to clear water (may take 1-2 days). Then add macro-algae, seagrasses, or mangroves. Allow tank to cycle, then add fish and corals into main tank. If using Mineral Mud™ in main tank, mix into a small area where you intend to plant your macro-algaes, seagrasses, or mangroves. Do not cover the entire tank bottom.
Run pumps for a day or two until water clears, then add plants.
NOTE: This substrate contains marine organics, and was created to mimic coastal marine mangrove environments. It is designed to reach anaerobic conditions within an inch of the sub-strate/water interface. Once established, avoid disturbing the bed.
10 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Has a typical size between 0.25 mm and 1.0 mm
Boasts an average density of 96 pounds per cubic foot
Utilizes Sea Breathe laser technology which preserves real live sand with its own original bacteria
Boasts unparalleled gas exchange
Every grain is coated with bacteria and encapsulated by capillary action in a thin film of real ocean water
This live sand utilizes Sea Breathe laser technology which preserves real live sand with its own original bacteria. Every grain of Ocean Direct is coated with bacteria and encapsulated by capillary action in a thin film of real ocean water that is open to the atmosphere for unparalleled gas exchange. Every breathable bag of Ocean Direct is alive with up to 1000 times more beneficial bacteria than other preservation methods. Each bag includes a packet of Bio-Magnet clarifier to reposition free-floating bacteria to where they are most active; sand beds, live rock surfaces, and to biological filtration media. Ocean Direct provides a thriving, natural aquarium in minutes! The 5 pound bag of Ocean Direct Live Oolite has a typical grain size between 0.25 mm and 1.0 mm and features an average density of 96 pounds per cubic foot.
6 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Overview
SulfaPlex™ is an effective and safe treatment for many bacterial, fungal and protozoan infestations in the aquarium. While it can be used in both freshwater and saltwater, it is particularly effective against the common bacterial and fungal infections of freshwater fish. It is also among the gentler antibiotics, and great for treating fish that are already stressed. It is easily removed with carbon and does not impair nitrification.
Active ingredients: sulfathiazole (69%) Inactive ingredients: excipients (31%)
Indications
SulfaPlex™ is appropriate for treating a variety of bacterial, fungal and protozoan infestations. Below are some of the more common diseases treatable with SulfaPlex™. Be aware that many diseases and infections share similar physical and behavioral symptoms, e.g. clamped fins, lesions, loss of appetite.
Deltec 600i DC Multi-Stage Power Control Protein Skimmer with Manual Self Cleaning Head
The new Deltec 600i 24VDC protein skimmer is suitable for aquariums from 200 up to 600 liters. The Deltec 600i comes with some great safety features. Should the water level in the sump suddenly exceed the maximum depth for the skimmer, or the air feed becomes blocked, the new emergency overflow system prevents the collection cup from overflowing.As the water level rises within the protein skimmer the air feed to the pump will shut off automatically via the emergency overflow further reducing the chance of foam flooding the skimmer cup.The base is a new hollow design where the water flows through to the level adjustment and indicator tubes. This new design feature means that water will exit the protein skimmer body from the lowest point greatly reducing the chance of micro bubbles escaping the body, increasing air- water contact time and also reducing noise and turbulence within the protein skimmer body.Removing the pump for cleaning and maintenance can be achieved in 20 seconds, thus keeping the skimmer running at optimal efficiency is a breeze.With the body of the skimmer being a cylinder and not tapered or conical shape, all the small air bubbles can rise unhindered, fully saturated and will only burst in the foam pot riser, adding to the efficiency and performance of Deltec skimmers.
Product Details:
Highly efficient cylinder shape
New developed emergency overflow with water level indicator
Extremely quiet operation due to new hollow chamber floor
Low power consumption
Quick and easy removal of the pump
Variable adjustable DC pump
Technical Details:
Aquarium Size 200 to 600 litres
Dimensions: 24 x 15,5 x 52 cm
Pump: Deltec DCC2
Power Consumption:11 Watt, creating 500 liters of air (in normal operation)
For sumps with 15 to 25 cm water level
PumpThe Deltec Skimmer 600i is operated with the Deltec DCC2. With only 11 watt about 500 liters of air are generated.Cleaning SystemFor the Deltec Skimmer 600i, there is an optional cleaning head system, whereby the inner standpipe is cleaned by deposits by turning the connection cup. If these deposits are not removed at regular intervals, the skimming performance is drastically reduced over time as foam bubbles burst prematurely at this layer and thus cannot contribute to water purification.Cylindrical ShapeThanks to the ergonomic cylinder shape, the Deltec Skimmer 600i achieves the best skimming results. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated and burst only in the riser of the connection cup. From there, the collected broth can be discharged via a drain hose without having to take the connection cup.
Emergency OverflowThe water level in the skimmer can be read off at the emergency overflow pipe. Furthermore, the marks for the minimum and maximum level help with the perfect adjustment of the water level. Due to the possibility of exchanging the emergency overflow pipe with the regulator pipe, you can decide for yourself how the pipes are arranged.Disassembly, Dimensions & ConstructionRegularly required cleaning of the pump is very easy thanks to the easy and fast disassembly of the skimmer. According to the manufacturer, the pump can be removed from the skimmer in a few seconds. The Deltec Skimmer 600i can be mounted and disassembled without tools. The dimensions of the skimmer are selected so that you can place them comfortably in your filter basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate the skimmer variably in 15 to 25 cm water depth.
The new MarinePure GEMs are made with the same formula as popular MarinePure SPHERES, the GEMs are approximately ¾ inches in diameter. They are packaged in hexagonal shaped boxes containing of 90 grams.
Each box contains over 135 m2 of accessible Surface Area.MarinePure GEMs are the perfect size for canister filters, hang on the back filters or nano-tank filter systems.This amount of media is good for up to 260 litre systems.They are the perfect solution for ammonia and nitrite elimination and most users will also see better control in their Nitrates.
Dosing pump heads do not last forever, and on average, the Kamoer Dosing Pump heads can last up to 2000 hours of run time. After that, there is a good chance that the lubricant on the tube and rollers will start to dissipate and cause more resistance and wear for the motor driving that channel. Maintaining the heads on the dosing system will help keep the motors running longer while providing more precise dosing.Replacing the head only takes a few seconds, and start by removing the input and output dosing tube from the head that needs to be replaced. Then by pinching the tabs at the base of the head, you can pull it away from the dosing pump body. Inserting the new one is just as easy, slide it over the motor spindle until it clicks into place, then reattach the dosing tubes and you are ready to go.What's Included?1x Replacement Kamoer Dosing Pump Head
Dosing pump heads do not last forever, and on average, the Kamoer Dosing Pump heads can last up to 2000 hours of run time. After that, there is a good chance that the lubricant on the tube and rollers will start to dissipate and cause more resistance and wear for the motor driving that channel. Maintaining the heads on the dosing system will help keep the motors running longer while providing more precise dosing.Replacing the head only takes a few seconds, and start by removing the input and output dosing tube from the head that needs to be replaced. Then by pinching the tabs at the base of the head, you can pull it away from the dosing pump body. Inserting the new one is just as easy, slide it over the motor spindle until it clicks into place, then reattach the dosing tubes and you are ready to go.What's Included?1x Replacement Kamoer Dosing Pump Head
The Kamoer F4 four channel dosing pump delivers a top quality dosing experience due to its unique features & WiFi network connectivity. Flexible and precise control of liquid additions to your aquarium with easy to use mobile interface, makes set up a breeze. Dosing Times: 24 times/day -once/7 daysFluid Volume: 1ml - 1000ml per set period. Accuracy: <+/-2%
Features
WIFI Control of dosing Pump: Yes - via iPhone, Android device or PC
Small form factor
Software update via WiFi: Yes
Battery back up - Settings saved if power lost
Uses high quality PharMed® Tubing in pump head
Calibration Accuracy: 0.1mls
2 Year Warranty: Yes
Support for an external RS485 extension
Can be used as a slave doser for X4 series
Dimensions: 180mm x 135mm x 68mm
Software Details 3 operation modes (Manual, Auto, or Custom mode)
Easy setting
Set dosing start and stop time (does not have to be 24 hours, for example, user can set to auto dose from midnight to 6am only)
Enter total number of mls to be dosed over the time period
Enter the number of times to dose each time period (up to 24)
User can even choose dosing every 1 - 3 days or certain days per week.
Adjustable dosing volume Auto mode: 0.1 - 9,999.9ml
Delay setting between channels prevents chemical interference.
Increased Dosing Accuracy:
Minimum Dosing Volume 0.1ml
Ensures precise, consistent dosing
Kamoer F4 Box Contents:
F4 Dosing Pump and Antenna
4 x Pump Head
Power Adapter
3m PVC Tubing
10ml Graduated measuring cylinder
Dosing Pump 4 tube Manifold
* Dosing pump mounting bracket available as an accessory
ENSURE PRECISE AND CONSISTENT DOSINGThe new Kamoer F4 PRO Wifi Doser Liquid Dosing Pump is the latest state of the art controllable dosing system from Kamoer. Each unit includes a Wifi connection which allows the doser to be controlled via iPhone or Android.
Keeping parameters stable is key to having a successful reef or planted tank. The F4 PRO can easily schedule dosing 2-part supplements (alkalinity & calcium), Kalkwasser, trace elements, live or prepared foods, or even fertilizers and liquid CO2, keeping your reef or planted aquarium system in an ideal range. Each unit includes a WiFi connection allowing the doser to be controlled with a free-to-download mobile app for iPhone or Android. The user-interface is friendly and intuitive software updates are a breeze, and can be pushed to the F4 Doser via WiFi.The F4`s 3 Operational Modes include Auto, Manual, and Custom, making it easy to get dosing out of the box. Select how much to dose, start and stop times, alternate dosing days, and even delay dosing to avoid precipitation from chemical interference. The included Battery Backup will make sure your programs are saved in the event of power failure, so you can have peace of mind - no need for reprogramming. Equipped with Colored Pumps and Tubing, the F4 PRO easily distinguishes which line is dosing which supplement from either the Green, Red, Yellow, or Blue channels. The F4 PRO`s space-saving, slim design will help keep your cabinet aesthetically pleasing, and can mount directly to it without additional shelving or accessories.
Software Details:
3 operation modes (Manual, Auto or Custom Mode).
Easy setting
- Set dosing start and stop time - does not have to be 24 hours (Example, user can set to auto dose from midnight to 6am only)
- Enter total number of ml to be dosed over the time period
- Enter the number of times to dose each time period (up to 24hr)
- User can even choose dosing every 1 - 3days orcertain days per week.
Adjustable dosing volume Auto mode: 0.1 - 9,999.9ml
Delay setting between channels prevents chemical interference.
Features:
WIFI Control of dosing Pump via iOS or Android devices
Software update via WIFI
Battery back up - Settings saved if power lost
Uses high quality PharMed® BPT Tubing in pump heads
Flow rate calibration for each pump
Calibration Accuracy: 0.1ml
Minimum Dosing Volume 0.1ml
2 year warranty
Dimensions: 250 x 59 x 49mm
F4 DOSER SPECIFICATIONSDosing Channel: 4Dosing Times: 24 times / day -once / 7 daysFluid Volume: 1ml - 999mlAccuracy: <+/-0.5%Pump Life: >2000 hoursFlow Rate: >45ml/minDimensions (length x width x height): 250 x 59 x 49mmWeight: 950gInside the package
F4 PRO dosing pump
3.5m lengths of PVC tube (Red, Yellow, Blue Green)
10Ml plastic graduated cylinder
Power adapter
Tube holder manifold / tube bracket
Mounting screws
Quick start guide
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Coral Color A is a complex of halogens (Iodine, Bromine and Fluorine). The halogens act both as antioxidants and oxidative agents within the soft tissue and mucus layer of corals, reducing the possibility of coral bleaching. In active reef systems, these elements are depleted quickly due to their high oxidative abilities and reactivity with organic materials. Iodine and bromine are related to the pinkchroma-protein (pocciloporin).Coral Color B is a complex of Potassium and Boron. Potassium plays an essential role in the transportation of coral nutrients within the soft tissue (including the nutrients provided by the Zooxanthellae). Potassium and Boron significantly affect the alkalinity of a coral’s soft tissue and the formation of aragonite in its skeleton. Potassium is related to the red chroma-proteins.Coral Color C is a complex of 8 “light” metals that includes Iron, Manganese, Cobalt, Copper, Aluminum, Zinc, Chrome and Nickel. These micro-elements are essential to many bio-chemical metabolic processes, including respiration, production of energy, chlorophyll and photosynthetic catalysts. C elements are related to the green/yellow chroma-proteins.Coral Color D is a complex of 18 trace elements. These 18 elements (out of all the trace elements in NSW) participate in the metabolic processes inside a coral’s skeleton and soft tissue. D elements are related to the blue/purple chroma-proteins.Weekly dosing - Soft CoralsTest the Color Elements every week and dose each supplement to replenish back to the optimal levels.Daily dosing - SPS coralsEnsure that all of the Color Elements are at optimal values and run the aquarium for4 days at a stable salinity (compensate for evaporation daily) without adding anysupplements. At the end of the 4 days test the Color Elements and calculate the “4 day dosage” of each supplement to replenish back to the optimal levels. Add the “4 day dosage” to the system. Divide this “4 day dosage” by 4 and use as the daily dosage for the next week.After a week of adding the daily dosage, test the Color Elements and calculate the adjusting dosage of each supplement to replenish back to the optimal levels.
If the adjusting dosage is significantly different from the previous daily dosage amend (increase/decrease) the daily dosage as appropriate.
If the measured level of a specific element is above the optimal level wait for the excess of the element to be depleted before restarting the daily supplementation with the amended daily dosage.
Continue testing all of the elements every week and make adjustments to the dailydosages as required. As your corals grow or you add or remove livestock the uptake of the elements in your aquarium will gradually change. It is recommended to keep a log book of the weekly measurements and dosages.If you miss one or more days of supplementing add the complete amount that you have missed but do not exceed the maximum recommended daily increase for any of the elements
5 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Red Sea KH/Alkalinity Pro Titration Test Kit (75 Tests)
This Test Kit is an advanced titration test, measuring the level of buffers in your reef aquarium to an exceptionally high resolution of 0.025 meq/l, making this kit a must have for any reef keeper. This test kit enables the accurate dosing of Red Sea's Reef Foundation B supplement (buffer) which is part of the complete Red Sea Reef Care program.
Introduction to pH & Alkalinity:
The pH is a very important parameter in the biology of aquatic organisms. It is a measure of the acidity or basicity of the water. The scale runs from zero to 14. Zero is the most acidic, 7 is neutral and 14 is the most basic. A change of 1 pH unit, for example from 7 to 6, means that the water gets 10 times more acidic.Due to its chemistry, salt-water is able to absorb a certain amount of acidic matter without a resulting change in pH. The substances in the water that do this are called buffers. The ability of water to withstand changes in pH is called buffer capacity. Based on a method of measuring buffer capacity it is referred to as the alkalinity of seawater. In some of the literature alkalinity is termed “Carbonate Hardness” or “ KH Carbonate Buffer”. This is exactly the same measurement as is measured in the Alkalinity Mini-Lab Test.pH and Alkalinity
The pH of natural seawater varies geographically in the world’s oceans between 8.1 and 8.4. On a local scale the pH is however remarkably stable. This is due to dissolved buffers (mainly bicarbonates), which prevent pH changes. Because of the enormous volume of the ocean, a nearly inexhaustible stock of buffers are present: the sea can take up large amounts of acids, without a noticeable change in pH.Compared to the sea the volume of a marine aquarium is very limited and therefore the alkalinity is also limited. As fish produce acid waste products and as the buffering substances are used up by calcareous algae and invertebrates, the buffer capacity may become so low that the pH could suddenly fall. This would be very dangerous to all organisms in the aquarium.The alkalinity is measured in so called mil-equivalents of alkaline substances (for example sodium bicarbonate) per liter. These alkaline substances have the power to prevent pH drops. The alkalinity of natural seawater is approximately 2.5 mil-equivalents per liter. This level should also be maintained in the marine aquarium.A common symptom of an unsuitable pH is pH-stress. Especially in the marine aquarium, unsuitable pH values are very stressful to fish, and increase the chance of the fish being susceptible to disease (marine white spot).
This Test Kit comes complete with:
Robust housing,
Glass Test Vial,
Color comparison chart,
Titrator included (easy to use, single hand, high precision tritator),
100ml sample of Reef Foundation B,
60ml of KH Buffer,
test up to 75 times,
In depth instruction manual.
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Bubble Magus MF70 Internal Hang On Filter
Design to Hang Inside Tank or Sump
MF-70 INT
Footprint: 5.91" x 4.53" ( Include Bracket )
Height: 15.36"
Pump: WP60 120w/60hz 12w 600L/H
Media Loading Capacity: up to 500ml
For use with Biopellets, GFO or Carbon
2 in stock
Delivery in 2-5 Days
Excluding Weekends and Public Holidays
Feature
Bubble Magus BP-130 BIO-PELLETS Filter is suitable for most media such as zeolite, biopellets, activated carbon or filter rock
For medium to Big Tank Use
Suitable for Rowaphos or Biopellets
Specification
Power 220V-240V 50Hz 20W Power
Rock WP1000 Pump
Size 176 x 220 x 500mm
1-2Litres Volume for Bio-Pellets
![Prodibio [N,P]EX](//www.dorrypets.co.za/cdn/shop/products/7_037a7acf-1ff4-4e1e-b5aa-0426c7a17cb1.jpg?v=1649320635&width=645)
![Prodibio [N,P]EX](http://www.dorrypets.co.za/cdn/shop/products/7_037a7acf-1ff4-4e1e-b5aa-0426c7a17cb1.jpg?v=1649320635&width=645)
